• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.255-258
• /
• 2004

The SAR(Solar Array Regulator) of KOMPSAT(Korea Multi Purpose SATellite)-1, 2 regulates a photovoltaic power according to the duty ratio commands of the ECU. But the ECU has so many other jobs that it can not calculate the solar array condition immediately. It means the SAR cannot always generate the maximum power of a photovoltaic. Nowadays, the commercial photovoltaic systems are using a controller operated by digital processing. But the usage for satellite is not adaptable. It is not easy to find the processor of the space grade and the price is expensive. So in this paper, the simple analog MPPT(Maximum Power Point Tracking) algorithm is proposed for the small satellite in LEO. This algorithm does not need any calculation of power by multiplication of voltage and current md a measurement of the solar array temperature. It is consist of only two sample and hold circuits, two comparators, a flip-flop, and an integrator. The proposed MPPT algorithm is verified by the simulation and experimental.

• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.92-99
• /
• 2014

The paper is related to smart maximum power system based on program logic. Especially, this system compares the total demand power with the target power by using the signal from the digital kilo watt meter. Based on the power information by the maximum power control equipment the consumed future power is anticipated. In addition, through consumed future power the controllable target power is set, and it applies on the maximum power control equipment. User or manager would control the load efficiently through the simple programming which could control load based on the control sequence and relay. To begin with the conventional maximum power control algorithm is surveyed, and the smart maximum power control system based on program logic is used, and the new algorithm from full load to proportion shut down is proposed by using PLC program. the validity of the proposed control scheme is investigated by both simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.23-26
• /
• 2001

This paper presents a digital motion control system for Reluctance Synchronous Motor (RSM) drives with direct torque control (DTC). The system consists of stator flux observer, torque estimator: two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source inverter(VSI), and TMS320C31 DSP controller by using fully integrated control software. The stator flux observer is based on the combined voltage and current model with stator flux feedback adaptive control of which inputs are current, voltage and actual rotor angle for wide speed range. In order to prove the suggested motion control algorithm, There are some simulation and testing at actual experimental system. The developed digitally high-performance motion control system are shown a good motion control response characteristic results and high performance features using 1.0Kw RSM.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.292-297
• /
• 2005

This paper proposes a simple MPPT control scheme of a Current-Control-Loop Error system Based that can be obtains a lot of advantage to compare with another digital control method, P&O and IncCond algorithm, that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. Therefore, it is applied a small home power generation system that required many expenses. But, a proposed method is easy to solve the cost reduction and power unbalance problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment on battery charger using PIC that is the microprocessor of a low price.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.182-192
• /
• 2015

This study develops a digital control scheme with power factor correction for a front-end converter in an electric vehicle battery charger. The front-end converter acts as the boost-type switching-mode rectifier. The converter assumes the two roles of the battery charger, which include power factor control and robust charging performance. The proposed control scheme consists of a charging control algorithm and a grid current control algorithm. The scheme aims to obtain unity input power factor and robust performance. Based on the linear average model of the converter, a constant-current constant-voltage charging control algorithm that passes through only one proportional-integral controller and a current feed-forward path is proposed. In the current control algorithm, we utilized a second band pass filter, a single-phase phase-locked loop technique, and a duty-ratio feed-forward term to control the grid current to be in phase with the grid voltage and achieve pure sinusoidal waveform. Simulations and experiments were conducted to verify the effectiveness of the proposed control scheme, both simulations and experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.979-984
• /
• 2007

This paper presents a new control mechanism for the proportional pressure control which is accomplished by electro-pneumatic regulator using two PZT actuators. The electro-pneumatic regulator of this study is 2-stage type and consists of two piezoelectric actuators, a controller and a main poppet valve. The piezoelectric actuators are multilayer bender type and are controlled by digital signal. Proportional pressure control technique is very important because that can derive improvement of product quality and driving ability in the pneumatic system. Solenoid actuator method for pressure control is widely used but this actuator has a high power consumption characteristics. So new actuator is required for the energy saving. In this study, PZT actuator for the pressure control was fabricated and experimented instead of the conventional type solenoid actuator. Experiments for the new control mechanism of the elector-pneumatic regulator were operated under the input condition of 0.4[MPa] and it was confirmed that this mechanism has a good control characteristics to the response sensitivity and hysteresis.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.33-42
• /
• 2001

In switched reluctance motor(SRM) deives, the turn-on and turn-off angles of each phase switch should be accurately controlled for accuracy and efficiency. The accuracy of the switching angles is mainly dependent upon the resolution of the encoder and the sampling period of the microprocessor, that are used to provide the information of the rotor position and to implement a control algorithm of the SRM, respectively. Thus, the higher the speed of the SRM is increased, the larger the amount of the switching angle deviations are from preset turn-on and turn-off angles. Consequently, the motor can not be driven stably high speed region. There fore, a simples and low cost encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using a simple digital logic circuit is also presented for a wide speed range operation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.152-155
• /
• 2002

An industrial robot noise has various noise sources such as gears, motors, bearings, and controller fans. Among these, gears are the most dominant source for noise. The gear noise, caused by tooth profile, elastic deformation, machining error and wear, is directly correlated with the transmission error of mating gear. Due to the fact that has several axis and many gears, it is difficult to understand the characteristics of the vibration and noise of robots. In this study, some advanced analysis techniques based on digital signal processing such as power spectrum, time spectral map, RPM map, and etc., were applied for locating the dominant frequency components of the robot noises and identifying their sources. In addition, sound quality analysis was performed in order to evaluate the operator's annoyance. The noise and vibration measurements were carried out at several points during the operation of each axis considering the effect of load and posture of the robot. Eased on the results, proper countermeasures to reduce excessive noise level have been suggested considering the characteristics of sources.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.81-94
• /
• 2007

Recently, the trend in the printing industry includes shorter run lengths and with fast turnaround times. As new markets have made it possible to produce small quantities of high-quality color products at affordable price, the general commercial printing meets the customer's diverse demand by using spot color besides process four colors. Especially, by using spot color for printing the enterprise's logo or specific color, we can see the effect of printing is getting better. With the combination of the right software, ink, media, and device can be treated as a digital proofer for spot color printing, providing significant time and cost savings compared to conventional procedures. The objective of this study is to investigate the quality of spot color proofs printed by ink-jet and dye sublimation proofer using ICC-based color management system. An Epson Stylus Color 3000 ink-jet proofer combined with Best Color Proof XXL RIP was tested for glossy and matte paper. 3M Rainbow dye sublimation proofer was examined using 3M Rainbow controller ver. 4.1 RIP on the manufacturer recommended proofing paper. ICC profiles were generated for each device using ECI 2002 visual target and evaluated for the accuracy of process 4 color reproduction. The test charts consisting of Pantone color 1140 was selected to test the quality of spot color reproduction.

• 방송공학회논문지
• /
• 제6권2호
• /
• pp.148-159
• /
• 2001

본 논문에서는 PSNR 관점에서 비디오 프로그램들 사이의 상대적인 화질을 정확하게 제어하는 선택적 화질 제어 시스템을 제시한다. 제안된 화질 제어 시스템은 하나의 일정 비트율 (CBR) 채널을 통해 전송되는 모든 프로그램들의 전송 비트율의 합을 일정하게 게 유지하면서도 각 비디오 프로그램에 대해서는 미리 설정된 상대적 화질을 유지하도록 가변 비트율 (VBR) 압축을 허용하는데, 이는 중앙 제어부에서 VBR 비디오 압축을 수행하는 비디오 부호기들을 동시에 제어하여 달성된다. 본 논문에서는 부호기/복호기 버퍼와 전체 전송 비트율에 대한 제약 조건의 해석에 근거한 버퍼 제어 방법도 제시한다. 다양한 실험을 통해 제안된 화질 제어 시스템은 비디오 버퍼의 넘침과 고갈을 방지하고 화질 제어의 오차가 0.1 dB를 넘지 않음을 확인할 수 있었다.