• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.163-169
• /
• 2007

In this paper, we propose a method of trigger pulse generation to capture the image on time by making a synchronization between the x-ray generator and digital x-ray image acquisition system. we designed a wireless trigger pulse generation circuit to make a synchronization between x-ray generator and digital image acquisition system and analysis its performance. When it starts to detect a certain level of x-ray radiation or above from the air, this method starts to generate a ACQ_START signal to indicate the timing for image acquisition starting from digital image acquisition system. Hence, when it starts to detect under certain level of x-ray signal from the air, this method starts to generate a ACC_END signal to indicate the timing for image acquisition stop from digital image acquisition system. Image acquisition is activated only this time between ACQ_START and ACQ_END signal. By doing this wireless detecting of x-ray signal from remote, we can get more accurate timing for capturing the x-ray image and any type of x-ray generator can be connected to digital image acquisition system, regards of wired protocol. This makes easy installation. We could get 3.5 line pair / mm resolution at 20 mAs of x-ray level with resolution chart. This is same or better image comparing to conventional wired result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3213-3217
• /
• 2009

Distribution, duplication and manipulation of the digital contents are very easy due to the characteristics of the digital contents. Thus, damages of invasion of property right rapidly increase due to infringement of copyright for the digital contents. To prevent illegal use and to settle conflict about ownership of the digital contents, continuous efforts with enormous expense are devoted. In this paper, we design and implement real-time audio watermarking system to protect ownership and copyright for the digital contents. The proposed system also clarifies where the responsibility about the illegal distribution lies. The system has convenient user interface so that general administrator without an expert knowledge of the protection of copyright can use easily. In addition, unlike the traditional watermarking system, our system has merit to offer information about the illegal distribution for clear post-management.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.409-412
• /
• 2005

A digital content have been utilized extensively without being limited to one territory of communication, computer, broadcasting, Mobile etc. A digital contents industry have been raised to a key point industry of a knowledge information society. An information infra setup of a global unit was processing to the development of Internet therefor copyright protection a digital contents and system for the officer have been desired. Like this, according as digital contents do fetters to MPEG-4 is circulated, copyright problem was risen. So, people had a lot of interests to protect and manage copyright. Hereupon, MPEG of the IS0/IEC established IPMP(Intellectual Property Management and Protection) standard, and supplements and corrects continuously standard. Therefore, existing system does fetters to MPEG-4 need system that process IPMP information. Hereupon. in this paper, designed system module that is processed by IPMP extension standard that progress now, and embodied copyright protection and management system that user can insert and update IPMP information efficiently within whole or specification part of MPEG-4 digital contents.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.805-815
• /
• 1994

The development of automatic production systems has a trend toward Computer Integrated Manufacturing System(CIMS) in recent years. In hardware configuration, CIMS are composed of intelligent CAD/CAM work stations, multifunction CNC machining centers including material handling systems. The DNC systems present the key element of automation hierarchy in a FMS. A DNC system is one which connects a number of numerically-controlled machines to a common memory in a digital computer for part program storage with provision for on-demand distribution of part program data to machines using communication in hierarchical structure of central computer, control computer and cell controller. This paper describes the development of Behind-the-Tape-Reader(BTR) type DNC system using CYBER 180-830 as a central computer and IBM PC-386 cell control computer and NC lathe with FANUC 5T NC controller. In this system, the connection between central computer and cell control computer is done via RS-232C serial interface board, and the connection between cell control computer and FANUC 5T controller is done via parallel interface board. The software consists of two module, central computer communication module for NC program downloading and status uploading, NC machine running module for NC operating.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.800-804
• /
• 2018

This paper presents a novel HF band differential quadrature phase-shift keying (DQPSK) orthogonal frequency-division multiplexing (OFDM) communication system. The system can deliver 3.6 kbps with a bandwidth of about 3 kHz. In a digital modem, OFDM with 32-point fast Fourier transform is used. In the system, each subcarrier uses DQPSK modulation. Hence, a demodulator does not require carrier phase recovery and symbol timing recovery. And, each subcarrier employs CRC error check code individually. By using CRC code for each subcarrier, bit error caused by multipath fading can be recovered simply.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2708-2710
• /
• 2001

한전에서는 판매업무의 혁신을 기하기 위하여 지리정보시스템(GIS)을 운영기반으로 하는 신배전정보시스템(NDIS : New Distribution Information System) 구축사업을 적극적으로 추진하여 현재 일부 지사 지점에서 시범운영중에 있으며, 향후 전국적인 운영확산이 예정되어 있다. NDIS에서는 국가기본도를 GIS의 기초도면으로 활용하고 있으나 DB구축시 기존 설비도면과의 상대위치오차가 발생되고, 설비가 누락 또는 오분류되어 있는 경우가 있어 이를 보정하는데 많은 노력이 드는 실정이다. 국가기본도 사용을 전제할 때 이러한 문제점은 피할 수 없는 현상이며, 한전에서는 이를 보다 효과적으로 해결하고자 배전설비에서 위치의 기준이 되는 전주를 중심으로 기초도면 변경에 따른 설비도면 보정기법연구와 시스템 개발을 수행하였다. 본고에서는 한전에서의 설비도 위치보정 적용환경과 함께 연구개발된 내용을 소개하고자 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.240-248
• /
• 2014

It is DC power that Output of renewable energy being recently developed and researched. Also, demand of DC power will expect to proliferate due to increase of digital load. Thus, DC distribution system providing high quality of power and reliability has emerged as a new distribution system. If the conventional distribution systems are substituted by proposed DC distribution system, the output of renewable energy can be connected with distribution systems under minimum power conversion. Therefore, in the event of connection with DC load, it can construct an efficient distribution system. In this paper, the integrated parallel operation of power conversion module for DC distribution system is proposed. Also, this paper proposed modularization of power conversion devices for DC distribution system and power control for parallel operation of large capacity system. DC distribution system consists of three power conversion modules such as AC/DC power conversion module 2 set, ESS module 1 set. DC distribution system controls suitable operation depending on the status of the DC power distribution system and load. Integrated operation of these systems is verified by simulation and experiment results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1201-1206
• /
• 2014

Retail stores are mostly relying their product management on handwriting. This handwriting management is limited and poor at managing the status of stocking and releasing. Also, to confirm real-time product status, additional statistic system is required. POS system developed to overcome foresaid problems is operating only in big and special stores because of expensive price and limited space. Therefore, new automated management system which has low installation price needs to be developed and adopted instead of handwriting management system. In this paper, we developed real-time product management system which can manage the products in retail stores by utilizing NFC function in mobile device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.494-499
• /
• 2008

In this study, a Software Defined Radio(SDR) technology-based digital filtering technique applicable to a multiple channel processing system such as a wireless mobile communication system using Code Division Multiple Access(CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response(FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter(BPF) to reconfigure another system. The feasibility of the algorithm is verified by implementing a multiple channel signal generator that is reconfigurable to other system profiles, including those for a CDMA system and a WCDMA system on identical hardware platform.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.519-522
• /
• 2002

Currently, in spite of continual efforts, the information utility of the construction industry does not communicate well with other industries. This problem arose from mistaken and misguided efforts on the parts of the construction industry because it left out of consideration construction characteristics which are at the center of construction, and this information system was directly introduced and operated from outside the industry. There were also other mistakes that the existing information systems disregarded in trying to fix these problems. Therefore, this study describes a new process, which proposes to build and utilize a Bridge Management System using the mobile internet concept, to solve the problems of the existing construction information management system.