• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.398-403
• /
• 2004

The demand of high speed machining is increasing because the high speed cutting providers high efficiency of process, short process time, improved metal removal capacity and better surface finish. Active magnetic bearings allow much high surface speed than conventional ball bearings and therefore greatly suitable for high speed cutting. The automatic control concept of magnetic bearing system provides ability of intelligent control of spindle system to increase accuracy and flexibility by means of adaptive vibration control. This paper describes a design and development of a milling spindle system which includes built-in motor with power 5.5㎾ and maximum speed 70,000rpm, HSK-32C tool holer and active magnetic bearing system. Magnetic actuators are designed for satisfying static load condition. The Performances of manufactured spindle system was examined for its static and dynamic stiffness, load capacity, and rotational accuracy. This spindle was run up to 70,000 rpm stably, which is 3.5 million DmN.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.15-18
• /
• 2010

Main component of radiography barrier aprons is lead. To manufacture a lead-free barrier sheath, barium sulfate and organic iodine-based chemicals should be mixed with rubber. Barrier capacity was tested in the medical field. To improve adaptation of rubber with the mixture, raw materials went through milling, agitation, and extruding processes. Three sheaths were manufactured with 30%, 80%, and 120% sulfate barium, respectively. This study found 10% lower barrier capacity of lead-free barrier than the traditional lead-containing rubber sheath. Problems, however, were confronted during the agitation and extruding processes. Mixing with rubber was a technically demanding job. Inconsistent depth, problems with thermal processing and dissipation were encountered as well.

• 한국통신학회논문지
• /
• 제19권7호
• /
• pp.1335-1345
• /
• 1994

대용량 교환시스템인 TDX-10의 내부통신망의 성능을 분석하였다. 내부통신망의 시뮬레이션은 SLAM II의 이산사건모델을 이용하여 개발하였다. 시뮬레이션의 결과로 각 노드에서의 최대버퍼길이와 평균대기시간 그리고 D버스의 이용율을 구하였다. 또한 링크속도를 고려한 내부통신망의 최대호처리용량을 구하였다.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.75-80
• /
• 2017

Nowadays, smart phone is being popularly used for communication, entertainment, and information retrieval. While demands on video traffic over mobile networks increases sharply, the wireless link capacity is often limited to fully support the traffic demand. Therefore, the size of video data needs to be reduced to provide high quality video with limited capacity. To handle this issue, we propose a video editing system using the ffmpeg library. The proposed system can provide a high quality video with a relatively small data size, thereby facilitating the mobile streaming services and live-video games.

• 전력전자학회논문지
• /
• 제1권1호
• /
• pp.7-11
• /
• 1996

From the cost-effective point of view, it is very important to design a current with the highest utilization factor of current capacity of power devices. This can be accomplished by a current controller without overshoot irrespective of the varying bounds of control voltage in PWM converters and the dead time due to the time delay. This paper suggests a novel decoupled controller with Smith-Predictor which has the fast control response without overshoot and steady stats error and also deal with the design method of the controller for PWM converters. The extensive digital simulations done by SIMULINK/MATLAB show that the suggested controller guarantees the full utilization of current capacity of power devices and the decoupled current control behavior.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권1호
• /
• pp.11-16
• /
• 2024

Illegal manipulation and alteration of digital content are becoming a social issue. To address this problem, there is an increasing demand for the development of technologies to prevent the manipulation and alteration of digital content. This paper proposes a data hiding algorithm capable of embedding a larger amount of confidential data in the original cover image while minimizing the degradation of image quality in stego images. The algorithm presented in this paper analyzes the characteristics of the image to extract corner points and then uses a method to insert watermarks around these extracted corner points. Additionally, through experimentation, it has been proven that this algorithm can insert a greater amount of watermark without degrading the image quality compared to other existing algorithms.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1232-1238
• /
• 2009

전력설비의 대용량, 고전압화 됨에 따라 발전기 고장 예방을 위한 고장보호시스템의 필요성이 점차 증대되고 있다. 신속하고 신뢰성 있게 운전하며 보호하는 발전기 보호제어 시스템의 개발이 시급히 요구된다. 본 논문에서는 전력 공급의 안정을 도모하고 대용량, 고전압화 되는 발전기의 고장 예방을 위한 발전기 보호기능을 갖춘 디지털 보호계전기 설계에 관한 연구를 수행하였다. 디지털 계전기의 발전기 고장보호에 사용되는 고장보호 알고리즘을 개발하였고 디지털보호계전기 H/W를 설계 제작하였다.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.47-52
• /
• 2005

A lot of information storage devices have been introduced and developed for recently years. The trends of those devices are high capacity, compact size, low power consumption, reliability, and removability for data interchange with other device. As a satisfaction of these trends, near-field technique is in the spotlight as the next generation device. In order for a near-field recording to be successfully implemented in the storage device, a slider and suspension is introduced as actuating mechanism. The optical slider is designed considering near-filed optics. Suspension is not only supports slider performance, and tracking servo capacity but also meets the optical characteristics such as tilt aberration, and guarantee to satisfy shock performances for the mobility fir the actuator. In this study, the optical slider and the suspension for near-field probe array are designed and analyzed considering dynamic performance of head-gimbal assembly and shock simulation..

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2010년도 춘계학술대회
• /
• pp.1-4
• /
• 2010

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.199-204
• /
• 2003

Digital high resolution cameras are widely available, and are increasingly use in digital close-range photogrammetry. And photogrammetry instruments are developing rapidly and the precision is improving continuously, The building of 3D terrains of high precision are possible and the calculation of the areas or the earthwork volumes have high precision due to the development of the technique of the spatial information system using computer, In this study, using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we t]v to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in pixel degree through digital close-range photogrammetry with bundle adjustment for local terrain model generation and earthwork volume.