• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.146-148
• /
• 2006

The aim of the paper is to design the PLS(Plasma Lighting System) driving inverter circuit with optimal efficiency. In general, it is known that the PLS driven by a pulse has a higher light-conversion efficiency. There are the Class-E type resonant inverter and the semi-bridge inverter as a circuit which can make a pulse with low duty ratio. In this paper, we analyze the losses of the above two circuits. To verify the loss analysis, the inverter circuit with 220V 380W input consumption is manufactured and tested. Throughout the experimental results, the high efficiency PLS system has confirmed.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.745-749
• /
• 2003

The iterative sliding mode observer is proposed to control sensorless PMSM(Permanent Magnet Synchronous Motor). Proposed sliding mode observer has the character which is robust to the disturbance and parameter variation. Low pass filter with the variable cutoff frequency is also proposed to compensate rotor angle, it is led to saving memory and minimizing operation time. Experimental results shows that the proposed sliding mode observer leads to the proper performance.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.26-29
• /
• 2001

In this paper, a brief overview of problems related to the electromagnetic, mechanical design criteria is reported. Also, we described the results about the comparisons between BLDC motor and induction motor for Turbo Compressor considering motor cost, efficiency and reliability. As a result, we select an induction motor for 12.5RT Turbo compressor for the application of small building's all-conditioning system. Finally, a prototype induction motor was manufactured and tested under compressor set. The test results were successfully met the mechanical, thermal and electromagnetic point of view.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.861-864
• /
• 2006

냉장고에 적용된 BLDC Fan Motor에 있어서 공진소음의 원인에 대하여 연구하였다. 연구에 있어서 종래의 가진 방법을 적용하기 곤란한 구조를 가진 소형 Fan & Rotor System의 동 특성 실험에서 전자 가진법 및 Microphone을 이용한 고유진동수 계측방법을 사용하고 그 타당성을 보였으며 연구결과, Pan과 Rotor System의 비틀림 고유진동수와 Fan의 굽힘 고유진동수가 BLDC Motor의 Commutating Torque Ripple에 의한 가진 주파수와 일치하여 공진이 발생하는 것으로 분석 되었으며 이와 관련된 주요 인자를 분석하고 대안을 제시하였다.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.124-124
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.277-278
• /
• 2007

본 논문은 HVAC(heating, ventilating, and air conditioning) 시스템에 대해 Particle Swarm Optimization(PSO) 알고리즘을 이용하여 최적화된 Multi-Fuzzy 제어기 설계를 제안한다. HVAC 시스템의 효율과 안정도에 결정적인 영향을 미치는 과열도와 저압(증발기의 압력)을 제어하기 위해, 3대의 Expansion Valve 와 1대의 Compressor 에서 동시에 제어하는 Multi-Fuzzy 제어기를 설계한다. 그리고 최적화 알고리즘 중 하나인 사회적인 행동양식을 기반한 PSO 알고리즘을 이용하여 설계된 Multi-Fuzzy 제어기를 최적화한다. 시뮬레이션의 결과 비교를 통해, 대표적인 최적화 알고리즘인 유전자 알고리즘을 사용한 최적화된 제어기와 제안한 PSO 알고리즘을 이용한 최적화된 제어기의 성능을 평가한다.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.843-845
• /
• 2003

In this paper, the design of the outer core which is one part of the linear motor is investigated by using the topology optimization and FEM. The object functions are to reduce the outer core area of the linear motor with the maximum magnetic energy in airgap. For topology optimization, the finite element model is made through the result of ANSYS, and the sensitivity calculation is done using ANSTOP(developed general software for topology optimization of electromagnetics). In ANSTOP, the optimization routine is implemented using SLP in DOT and the ANSYS is used as a function solver.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.684-686
• /
• 2003

Until recently, the 2-D FEA neglects the magnetic field fringing and end-leakage, it leads to the approach of a trial and error experimental design. Since 3-D FEA is investigated for exact side force analysis of Linear Motor for Linear compressor. For the 3-B FEA, ANSYS as commercial tool are used.

• The korean journal of orthodontics
• /
• v.52 no.3
• /
• pp.236-245
• /
• 2022

New digital technologies, many involving three-dimensional printing, bring benefits for clinical applications. This article reports on the clinical procedure and fabrication of a skeletally anchored mesialization appliance (Mesialslider) using computer-aided design/computer-aided manufacturing (CAD/CAM) for space closure of a congenitally missing lateral incisor in a 12-year-old female patient. The insertion of the mini-implants and appliance was performed in a single appointment. Bodily movement of the molars was achieved using the Mesialslider. Anchorage loss, such as deviation of the anterior midline or palatal tilting of the anterior teeth, was completely avoided. CAD/CAM facilitates safe and precise insertion of mini-implants. Further, mini-implants can improve patient comfort by reducing the number of office visits and eliminating the need for orthodontic bands and physical impressions.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.351-354
• /
• 2000

인터렉티브 디지털 TV 는 기존의 텔레비전 기능에 인터넷 기능을 결합함으로써 TV 를 이용한 전자상거래, VOD 서비스, 표적 광고 등을 가능하게 한다. 이와 같은 서비스를 위해서는 TV 용 웹브라우저가 필수적인 응용 프로그램으로 요구된다. 본 논문에서는 일반 웹 컨텐트의 브라우징 기능 뿐만아니라 디지털 TV 의 데이터 방송 수신 기능이 포함된 디지털 TV 용 웹브라우저의 설계를 소개한다. 본 웹브라우저의 설계에서는 실시간 오디오/비디오 플레이어와의 연결성을 고려하였고 WebPIP, TV오버레이 등을 통한 방송 컨텐트와 웹 컨텐트의 통합 기능이 추가되었다.