• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.646-656
• /
• 2015

This study investigates the conditions of Korean naval duty and combat uniforms to develop a new design. Survey participants consisted of, 723 Sailors ($25.3{\pm}6.9yr$ in age, $43{\pm}53$ months in work experience, $174{\pm}6cm$ in height, $71{\pm}9kg$ in body mass) serving in the Korean Navy for over 12 months. The questionnaire consisted of 72 questions about anthropometric characteristics, preferred design, textiles, wear mobility, and subjective perceptions. The results showed that the preferred colors for future naval duty uniforms were blue in summer (69%) and black in winter (62%). Digital camouflage pattern (60%) and darker colors on the inside of shirt collar (87%) and the edge of sleeves (84%) were preferred. They favored more than one pocket on the upper arm and chest of the shirts (58%), narrower width around pant legs and hems than the current clothing (63%), self-controlled elastic waist (55%) and no cargo type pocket on the pants (45%). There were requirements to alleviate excessive heat stress in summer and to protect from the cold and wind in winter. Wrinkle-free (85%), anti-bacterial (78%), water-proof (75%), oil-proof (90%), and elastic (67%) textiles were preferred for Korean navy uniforms. These results will be applied to develop the next generation Korean navy uniforms.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권6호
• /
• pp.606-612
• /
• 2000

This study was performed to investigate the average anthropometric value of normal Korean men and women and to compare the preceding literatures. Additionally, average Korean profilogram was made to serve as a template for diagnosis of facial form. Eighty five Korean subjects(41 men, 44 women) aged between 21 to 26 were selected by members of the author's department on the basis of intact dentition and Class I occlusion without facial asymmetry. Frontal and lateral photographs were taken under standardized condition with digital camera. The image was magnified and adjusted according to the FH plane of cephalometric radiographs and digitized using personal computer. To compare the Western beauty, 25 esthetically pleasing female was selected to measure various angle and distance of the face. 1. It was possible to calculate the mean coordinate value of Korean normal samples which enables the direct visualization and comparison with the use of template. The method in this study was easy to applicate under the Microsoft $Windows^{(R)}$ bases. 2. Maxillary vertical hypoplasia, upper and lower lip protrusion was characteristics of Korean norms and relatively narrow alar base distance, less conspicuous nasal projection was observed. As the vermilion exposure and upper lip length was more than western norm, chin looks shorter than western. To compare the Korean and Western esthetically pleasing profile, facial convexity and nose was less conspicuous in Korean women.

• 한국의류산업학회지
• /
• 제10권1호
• /
• pp.83-91
• /
• 2008

This study was designed to figure out the changes in elderly women's foot size and shape by aging, to propose size specification for elderly women's shoes, and to produce regression equations using representative measurements items to estimate other measurements usually hard to get. Subjects were 118 women of 30-59 years and the 227 elderly women over 60 years. Martin's anthropometry was done on the right foot of each subject for 25 items. And 11 indirect measurement items were measured on both foot printing sole outline and picture in profile taken by digital camera. For statistical analysis on the anthropometric measurements by SPSS program, analysis of variance, post-hoc test(SNK-test), crosstabulation, multiple correlation analysis, regression analysis were performed. The results of the study are as follows. Firstly, it was found that the foot figures of elderly women over 60 years were smaller in girth and width than those of below 60 years. In addition, it was revealed that a big toe and a little toe of elderly women showed a tendency concentrating to the central axis of feet. The foot index of elderly was smaller in width and girth. Secondly, foot size distribution table of elderly group showed wider size ranges and covered smaller sizes than the below the age of 60, meaning wide variation in foot size of elderly women. Thirdly, the multiple correlation analysis showed high correlation of foot length/girth to other measurements, suggesting these two items could be used as representative items for elderly women's shoe size specification as other age groups. Regression equations were produced using foot length/girth to estimate other measurements, suggesting such items could be estimated effectively and utilized in on/off-line shoe manufacturing shop as heel to big toe length, heel to little toe length, exterior malleouls width, instep girth, ankle girth, etc. These results imply prudent features of elderly women's foot as diversity of foot shape and wide size specification range should be applied for ergonomic shoe design for them.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1495-1506
• /
• 2004

This study was attempted to clarify the characteristics of elderly women's foot shape by examining the various measurements of women over 60 years old as compared with those of women in twenties considered as reference group. The subjects were 321 elderly women and 181 young women. Their right feet were measured directly and indirectly by using scanner and digital camera. The anthropometric measurements were composed of 62 items. They were measured during the months of July and August in 2001. As a result of comparing actual measurements of foot between the two groups, it was found that the elderly women tended to have shorter and lower foot than those among the young women. Among the elderly women, in addition, it was revealed that many deformities related to toes or legs led to the toes concentrated to the central axis of feet resulting in relatively steeper lateral angle of toe, and the heels and legs slanting forwards. As a result of comparing index values of foot between the groups, the elderly women's foot had the relatively wide width and low height in comparison with the length, showing more elliptical flattening than those of the young women. And, the width of the inside was wider than that of the outside, and the toe width was relatively short in comparison with the foot width resulting in severe deformities on the toes or the central axis of foot. Therefore, it was found that there were several deformities including flat foot or deformed toes among elderly women. It is expected that the characteristics of elderly women's foot shown in the results mentioned above will be used as the basic data in designing the footwear for elderly women.

• 대한치과교정학회지
• /
• 제45권3호
• /
• pp.105-112
• /
• 2015

Objective: A recently developed facial scanning method uses three-dimensional (3D) surface imaging with a light-emitting diode. Such scanning enables surface data to be captured in high-resolution color and at relatively fast speeds. The purpose of this study was to evaluate the accuracy and precision of 3D images obtained using the Morpheus 3D$^{(R)}$ scanner (Morpheus Co., Seoul, Korea). Methods: The sample comprised 30 subjects aged 24.34 years (mean $29.0{\pm}2.5$ years). To test the correlation between direct and 3D image measurements, 21 landmarks were labeled on the face of each subject. Sixteen direct measurements were obtained twice using digital calipers; the same measurements were then made on two sets of 3D facial images. The mean values of measurements obtained from both methods were compared. To investigate the precision, a comparison was made between two sets of measurements taken with each method. Results: When comparing the variables from both methods, five of the 16 possible anthropometric variables were found to be significantly different. However, in 12 of the 16 cases, the mean difference was under 1 mm. The average value of the differences for all variables was 0.75 mm. Precision was high in both methods, with error magnitudes under 0.5 mm. Conclusions: 3D scanning images have high levels of precision and fairly good congruence with traditional anthropometry methods, with mean differences of less than 1 mm. 3D surface imaging using the Morpheus 3D$^{(R)}$ scanner is therefore a clinically acceptable method of recording facial integumental data.

• 한국직업건강간호학회지
• /
• 제18권1호
• /
• pp.44-54
• /
• 2009

Purpose: The aim of this study was to examine the effects of obesity on the physiological levels of adiponectin, leptin and components of metabolic syndrome (MS) in male workers, aged 30-40 years. Methods: Body mass index (BMI) was measured with Anthropometric equipment. Blood pressure and serum parameters were measured with an automatic digital sphygmomanometer and autochemical analyzer, respectively. Adiponectin and leptin were analysed by ELISA kits and MS was defined based on the NCEP-ATP III. Results: Body fat mass of waist and hip, systolic and diastolic blood pressure were significantly higher, as expected, in the BMI>25kg/$m^2$ in comparison with the $BMI{\leq}25kg/m^2$. While fasting glucose, insulin, HOMA-IR and leptin in the BMI>25kg/$m^2$ were also significantly higher compared with $BMI{\leq}25kg/m^2$, HDL-cholesterol and adiponectin were significantly higher in $BMI{\leq}25kg/m^2$. On multiple logistic regression analysis for the components of MS, exercise, adiponectin and leptin were an only independent factor for MS in non-obese male workers($BMI{\leq}25kg/m^2$) after adjustment for age, cigarette smoking and drinking habits. Conclusion: These results suggested that the obesity in men was associated with physiological levels of adiponectin and leptin contributing to feedback control of MS and that dysfunction and/or declination in feedback control system associated with changes in physiological levels of neurptrophics: adiponectin and leptin might ultimately induce MS.

• Genomics & Informatics
• /
• 제11권2호
• /
• pp.83-92
• /
• 2013

Genetic studies on facial morphology targeting healthy populations are fundamental in understanding the specific genetic influences involved; yet, most studies to date, if not all, have been focused on congenital diseases accompanied by facial anomalies. To study the specific genetic cues determining facial morphology, we estimated familial correlations and heritabilities of 14 facial measurements and 3 latent factors inferred from a factor analysis in a subset of the Korean population. The study included a total of 229 individuals from 38 families. We evaluated a total of 14 facial measurements using 2D digital photographs. We performed factor analysis to infer common latent variables. The heritabilities of 13 facial measurements were statistically significant (p < 0.05) and ranged from 0.25 to 0.61. Of these, the heritability of intercanthal width in the orbital region was found to be the highest ($h^2$ = 0.61, SE = 0.14). Three factors (lower face portion, orbital region, and vertical length) were obtained through factor analysis, where the heritability values ranged from 0.45 to 0.55. The heritability values for each factor were higher than the mean heritability value of individual original measurements. We have confirmed the genetic influence on facial anthropometric traits and suggest a potential way to categorize and analyze the facial portions into different groups.

• 한국의상디자인학회지
• /
• 제25권1호
• /
• pp.33-47
• /
• 2023

In this study, the difference in human body dimensions between the age groups of Generation M (27 to 39 years old) and Generation Z (20 to 26 years old) was analyzed. This study also analyzed if there was a change in the body shape of the MZ generation, who have different sensibilities from the "young people" of the past. In addition, major changes in human body dimensions were carefully analyzed and presented as basic data for clothing design. Therefore, a t-test was performed to verify the significant differences in the measurements of each age group. To examine the change in human body measurements according to the measurement year, the 7th and 8th size Korea data statistics were analyzed. The main required dimensions of clothing design were analyzed graphically for visual changes according to measurement year and age group. As a result of the analysis, Generation Z was found to have a difference in body shape from Generation M, and is generally smaller and slimmer with broader shoulders. In addition, the body shape change between the 7th and 8th measurement periods was significantly higher than the 8th measurement overall. Height has increased and back length has become shorter, resulting in a larger ratio of lower body length. In addition, the proportion of obesity abnormalities has increased. Therefore, since the dimensional system set from the past data can cause problems for the fitting of clothing for the MZ generation, it is necessary to design the clothing and reset the dimensional system making it suitable for the changed the body shape of the MZ generation.

• 대한두개안면성형외과학회지
• /
• 제25권3호
• /
• pp.123-132
• /
• 2024

Background: The introduction of presurgical nasoalveolar molding represented a significant departure from traditional molding methods. Developed by Grayson and colleagues in 1993, this technique combines an intraoral molding device with a nasal molding stent. This study aimed to compare the Grayson nasoalveolar molding appliance versus DynaCleft appliance as two methods of presurgical nasoalveolar molding. Methods: A single-blinded, randomized, parallel-arm clinical trial was conducted. Sixteen infants with complete unilateral cleft lip and palate were enrolled and divided into two groups of eight. Group 1 was treated with a modified Grayson nasoalveolar molding appliance that included a nasal stent, while group 2 was treated with DynaCleft elastic adhesive tape and an external nasal elevator. Standardized digital photographs of each infant were taken at baseline and post-treatment using a professional camera. Nine extraoral anthropometric measurements were obtained from each image using image measurement software. Results: The modified Grayson nasoalveolar appliance demonstrated a more significant improvement compared to DynaCleft in terms of alar length projection (on both sides), columella angle, and nasal tip projection. Symmetry ratios also showed enhancement, with significant improvements observed in nasal width, nasal basal width, and alar length projection (p< 0.05). Conclusion: Both the modified Grayson nasoalveolar appliance and DynaCleft appear to be effective presurgical infant orthopedics treatment options, demonstrating improvements in nasolabial aesthetics. The modified Grayson appliance, equipped with a nasal stent, improved nasal symmetry more effectively than DynaCleft, resulting in a straighter columella and a more medially positioned nasal tip.

• 한국의류산업학회지
• /
• 제26권1호
• /
• pp.78-87
• /
• 2024

This study aimed to propose an innovative teaching pedagogy using a half-scale body form in apparel design education and evaluate its effectiveness in augmenting students' understanding of ergonomic patterns. Constructed in alignment with Phoenix's (2018) study, which used 3D body scanning and digital editing software, the half-scale body form was created through a five-step process, encompassing body measurement, 3D body modeling, fabrication of a physical half-scale body form, pattern making, and evaluation. Implemented in an undergraduate patternmaking course offered at a 4-year university in the metropolitan Seoul, this instructional approach's effectiveness was gauged through students' course projects and exit interviews. The results underscored the positive impact of the proposed teaching pedagogy on students' grasp of ergonomic pattern development, fostering a keen understanding of diverse body shapes and sizes and the relationship between the human body and garments. Furthermore, it played a role in cultivating positive body image and self-endorsement among students. The research contributes meaningfully by presenting a fresh perspective in apparel design education, seamlessly integrating advanced anthropometric and technological tools into a conventional patternmaking classroom. It offers a novel learning experience for students majoring in apparel, creating a fun and interactive teaching environment.