• 한국통신학회논문지
• /
• 제12권5호
• /
• pp.505-518
• /
• 1987

본 논문은 2레벨 및 3레벨 형태의 펄스폭변조 기법을 해석한 후 이런 두 형태의 펄스폭변조인버터에 대한 제어기로서 사용될 수 있는 다중 프로세서를 설계하였다. 설계된 다중 프로세서 방식은 Supervisory 프로세서가 공용메모리를 통해서 Local 프로세서와 상호 연결되어 있는 계층적인 구성을 도입함으로써 정교한 디지탈제어특성을 보였다. 이런 다중 프로세서 구성을 실현함으로써 시스템의 소프트웨어를 변경시 큰 자유도를 얻을 수 있었고 단일 프로세서구성때보다 소프트웨어를 더욱 간단하게 할 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.441-443
• /
• 2007

In this paper, The authors design the current controller which independently control the d, q axis current transformed by the synchronously rotating d, q axis and a Space Vector Pulse Width Modulation(SVPWM) to steadily control the output DC-Link voltage against the variable load of the three phase PWM converter. Also, This study improves the high power factor, stability, and rapid response by the phase angle control using the digital Phase Locked Loop(PLL).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.830-832
• /
• 1993

In this paper, A voltage source PWM converter which achieves bidirectional power flow between a $3{\phi}$ AC supply and a DC bus voltage is described. And the paper considers both the steady state and transient response of such a device, and develops mathematical models to describe its performance under the digital control system. As a result the AC line current becomes sinusoidal and the input power factor is improved to unity.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.118-125
• /
• 2022

With the aim to maximize the use of a given voltage source in the field of railway and electric vehicles, this study applies a technique for controlling the overmodulation region between the linear and the six-step regions. High linearity overmodulation techniques that do not use look-up table (LUT) to digital signal processor (DSP) using carrier based pulse width modulation (PWM) are proposed. Such technique requires the phase of the voltage vector at the point where the circular trajectory of the voltage command vector and hexagonal cross each other. Therefore, a method is proposed to obtain a phase of a voltage vector that is derived through an equation and applied to a carrier-based PWM. Validity of the proposed implementation method is confirmed through simulation and experiment.

• 제어로봇시스템학회논문지
• /
• 제22권7호
• /
• pp.513-518
• /
• 2016

The piezoelectric actuating device is known for its large power density and simple structure. It can generate a larger force than a conventional actuator and has also wide bandwidth with fast response in a compact size. To control the piezoelectric actuator, we need an analog signal conditioning circuit as well as digital microcontrollers. Conventional microcontrollers are not equipped with an analog part and need digital-to-analog converters, which makes the system bulky compared with the small size of piezoelectric devices. To overcome these weaknesses, we are developing a single-chip controller that can handle analog and digital signals simultaneously using mixed-signal FPGA technology. This gives more flexibility than traditional fixed-function microcontrollers, and the control speed can be increased greatly due to the parallel processing characteristics of the FPGA. In this paper, we developed a floating-point multiplier, PWM generator, 80-kHz power control loop, and 1-kHz position feedback control loop using a single mixed-signal FPGA. It takes only 50 ns for single floating-point multiplication. The PWM generator gives two outputs to control the charging and discharging of the high-voltage output capacitor. Through experimentation and simulation, it is demonstrated that the designed control loops work properly in a real environment.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.160-170
• /
• 2018

For high power photovoltaic (PV) grid-connected converters, high order filters such as multi-tuned filters and Traps+RC filters with outstanding filtering performance have been widely researched. In this paper, the optimization of a multi-tuned filter with a low damping resistance and research on its corresponding control scheme have been combined to improve the performance of the proposed filter. Based on the characteristics of the switching harmonics produced by PWM, the proposed filter is optimized to further improve its filtering performance. When compared with the more common Traps+RC filter, the advantages of the proposed filter with low damping resistances in attenuating the major switching harmonics have been demonstrated. In addition, a simpler topology and reduced power loss can be achieved. On the other hand, to make the implementation of the proposed filter possible, on the base of the unique frequency response characteristic of the proposed filter, a digital single-loop control scheme has been proposed. This scheme is a simple and effective means to suppress the resonance peak caused by a lack of damping. Therefore, a smaller volume, better efficiency of the proposed filter, and easy implementation of the corresponding control scheme can be realized. Finally, the superiority of the proposed filter topology and control scheme is verified in experiments.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.70-77
• /
• 2013

본 논문에서는 새로운 기법의 PWM 발생기를 이용한 저면적, 고효율 SMPS를 제안한다. 제안된 회로에서 PWM의 duty ratio는 pseudo relaxation-oscillation technique를 이용한 PWM 발생기의 내부 커패시터 전압 기울기를 제어하는 방식으로 결정된다. 기존의 SMPS들에 비해, 제안된 제어 방식은 loop bandwidth 보상을 위해 기존의 아날로그 제어방식의 SMPS에서 요구되는 필터회로나 디지털 제어방식의 SMPS에서 요구되는 디지털 compensator가 필요 없기 때문에 단순한 구조로 구성된다. 또한, 제안된 회로는 PWM 발생기의 내부 캐패시터 용량 변화를 통해 1MHz~10MHz까지 스위칭 주파수를 사용자가 선택할 수 있다. 시뮬레이션 수행결과 제안된 SMPS는 10MHz 스위칭 주파수를 선택했을 때 내부회로에서 소모되는 전류는 최대 2.7mA, 파워 Trail을 제외한 전체 시스템의 전류 소모는 15mA였다. 또한, 제안된 SMPS는 시뮬레이션으로 3.3V출력에서 9mV의 최대 리플 전압이 발생하였다. 본 논문에서는 동부하이텍 BCD $0.35{\mu}m$ 공정 파라미터를 이용한 시뮬레이션 및 칩 테스트를 통해 제안된 회로를 검증하였다.

• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.124-129
• /
• 2009

최근 자동차 및 자동화 등 많은 첨단 산업분야에서 산업용 모터 정밀 제어를 위한 인버터의 요구가 증가하고 있다. 본 논문에서는 FPGA를 이용하여 단일 제어 유닛으로 여러 개의 모터를 제어할 수 있는 SVPWM 모듈을 설계 제작하여 모터 정밀제어에 응용하고자 한다. 개발된 WVPWM 모듈에는 PWM 발생기뿐만 아니라 위치 및 전류센서 처리 부분과 데프타임 보상기 알고리즘도 함께 구현되었다. 개발 툴은 ALTERA Quartus 8.0을 사용하였으며 시뮬레이션에 의해 동작 특성을 검증하였고 실험을 통해 성능을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1589-1596
• /
• 2015

A novel control method of a three-phase PWM inverter with LC filter is proposed. The transfer function of LC filter is the same as that of 2nd order low pass filter(2nd LPF) which has a zero damping ratio. A simple method of implementing 2nd LPF with damping ratio is to add resistor to inductor or capacitor of LC filter. In an industrial application, it is not practical to adopt damping resistor because it results in losses being proportional to square of current flowing through resistor. Instead of using damping resistors, the proposed active damping control(ADC) utilizes all pass filter(APF) and considers inherent processing delay of digital controller. The overall transfer function of the proposed method is the same as a 2nd LPF and its damping ratio is also controllable via control variables. Detailed design and implementation of controller is also presented. Experiments are conducted with a 7.5kVA induction motor drive system controlled by PWM converter and inverter. Test waveforms are also presented to verify the proposed LC filter control algorithm.

• 한국정보통신학회논문지
• /
• 제13권6호
• /
• pp.1117-1122
• /
• 2009

본 논문에서는 온도 센서 및 온도 측정을 위한 제어회로를 설계하였다. 설계된 회로는 기존의 방법들과는 달리 일반적인 CMOS(Complementary Metal Oxide Semiconductor) 공정에서 추가 공정없이 제작 가능하도록 설계하였으며, 온도는 디지털 값으로 출력 되도록 구성하였다. 설계되어진 회로는 5volts 공급전압을 사용하였으며, 0.5${\mu}m$ CMOS 공정을 사용하였다. 온도 측정을 위한 회로는 PWM(Pulse Width Modulation) 제어회로, VCO(Voltage controlled oscillator), 카운터 그리고 레지스터로 구성되어 있다. PWM 제어회로의 동작 주파수는 23kHz 이며, VCO의 동작 주파수는 416kHz, 1MHz, 2MHz를 사용하였다. 회로의 동작은 SPICE(Simulation Program with Integrated Circuit Emphasis)를 사용하여 확인 하였다.