• Environmental Engineering Research
• /
• 제10권6호
• /
• pp.294-305
• /
• 2005

The effectiveness of fly ash-, quicklime-, and quicklime-fly ash-based stabilization/solidification(S/S) in chromium(Cr) contaminated soils was investigated using modified semi-dynamic leaching tests. Artificial soil samples composed of kaolinite or montmorillonite contaminated with chromium nitrate(4000 mg $Cr^{3+}\;kg^{-1}$ of solid) were prepared and then subjected to S/S treatment using quicklime, fly ash, or quick lime-fly ash. The effectiveness of the treatment was evaluated by assessing the cumulative fraction of leached $Cr^{3+}$ as well as, by computing the effective diffusivity ($D_e$) and the leachability index (LX) of the treated samples. The reduction in $Cr^{3+}$ release for the untreated samples was more pronounced in the presence of montmorillonite, which was attributed to sorption. Treatment with quicklime, fly ash, or quick lime-fly ash was significantly effective in reducing $Cr^{3+}$ release most probably due to the formation of pozzolanic reaction products and $Cr(OH)_3$ precipitation. The most effective treatment was observed in montmorillonite-sand soil samples treated with quicklime-fly ash (99.8% removal). The mean $D_e$ decreased significantly and the mean LX was greater than 9 for all treated samples, indicating that the treated soils were acceptable for "controlled utilization". The mechanism controlling $Cr^{3+}$ leaching from all treated samples during the first 5 days appeared to be diffusion.

• 한국치위생학회지
• /
• 제6권4호
• /
• pp.481-493
• /
• 2006

The purpose of the review article was to summarize and discuss the available information concerning the effect of bleaching on human teeth and reduced treatment on negative influence. Tooth bleaching effect was differ from extent of concentration and application period of a tooth bleaching agent, certainly full knowledge prior treatment about adverse effect possible appearance and follow clinical treatment for the least reduce. It remains unclear in how far those observation may result in significant adverse effect under clinical conditions. Nevertheless, further investigation are necessary to elucidate these aspect more precisely. The findings of the study were as follows : 1. It is recommended to delay placement of restorations after termination of bleaching therapy for at least 1-3 weeks. 2. Reduced negative influence that is clinical feasibility of catalase in protecting bleached surface against Oxygen radical. 3. The residual peroxide in tooth after bleaching seems to be removed by gradual diffusion and it may be possible to eliminate the adverse effect on tooth by using water displacement solution, ethylalcohol and aceton including it for effective removal of free radical oxygen.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1291-1292
• /
• 2007

Recently, there were many researches for efficiency improvement of DSC. Among of these works, research of surface treatment is still a prerequisite for electron diffusion, light-harvesting and surface state of DSC.[1] Using of the surface treatment, it can be raise up porosity of $TiO_2$ nano-crystalline structure on photo-electrode. There are chemical, physical, electrical and optical methods which raise up its porosity. In this paper, we have designed and manufactured MOPA-type ultrasonic circuit (100W, frequency and duty variable). Manufactured ultrasonic circuit to use to force cavity density and power into $TiO_2$ paste. Then, we have optimized forcing time, frequency and duty of ultrasonic irradiation for surface treatment of photo-electrode of DSC. In I-V characteristic test of DSC, ultrasonic and thermal treated DSC shows 19% improved its efficiency against monolithic DSC. And it shows stability of light-harvesting from drastically change of light irradiation test.

• 한국표면공학회지
• /
• 제20권2호
• /
• pp.49-59
• /
• 1987

The properties of $Cr_2O_3-Al_2O_3-SiO_2$ composite oxide coatings on steel surface were investigated. The results obtained were as follows: The microhardness of oxide coating layer increased with increasing heat-treatment temperature and $Cr_2O_3$ content in coating layer. The hardness showed the highest value (850Hv) treated at 700$^{\circ}C$ for $SiO_2:Al_2O_3:Cr_2O_3$=1:1:4. Increasing heat-treatment temperature, corrosion current density became lower and coating layer became denser. The corrosion current density showed the lowest value $(6.5{\times}10^{-5}\;Acm^2)$ treated at 750$^{\circ}C\;for\;SiO_2:Al_2O_3:Cr_2O_3$=1:1:3. These results were explained by protective layer which was formed during heat-treatment. The bonding between matrix and coating layer is expected to be made mechanically and chemically by the inter diffusion of Ni and Fe. The composite oxide coating was formed by softening of the binder with increasing heat-treatment temperature. The strengthening of coating layer is to be resulted from the dispersion of major oxide particles.

• 한국식품영양과학회지
• /
• 제26권6호
• /
• pp.1140-1146
• /
• 1997

Storage stability of ginger paste product was investigated from the standpoint of the inhibition of nonenzymatic browning and loss of gingerol contents. For the experimentations, control, 0.04% of N-acetyl-L-cysteine in ginger paste(NAcCys), and combination treatment of NAcCys, 0.92 of water activity and 6.30 of pH in ginger paste (mixed treatment) were stored at 3$0^{\circ}C$ for 40 days and analyzed for browning and gingerol contents. In addition the changes in sugars, organic acids, ascorbic acids, amino acids, and sensory quality were determined. The results revealed that the mixed treatment agent was effective in preventing both nonenzymatic browning and loss of gingerol contents. The inhibition by combination treatment might be resulted from the control of radical formations by sulfhydryl groups of NAcCys and the increase of diffusion resistance in lower water activity. Browning development and total gingerol contents were found to be correlated to some physicochemical characteristics of ginger paste; that is, browning development to amino acid and color value in sensory evaluation, and total gingerol contents to flavor in sensory evaluation.

• 소성∙가공
• /
• 제31권4호
• /
• pp.179-185
• /
• 2022

The influence of post-roll bonding heat treatment conditions such as temperature and time on the variation in the diffusion layer, generated at the bonding interface and the subsequent mechanical properties of the roll-bonded Ti grade 1/Al1050/Ti grade 1 sheets, was systematically investigated. The intermetallic compound (IMC) phase generated by post heat treatment conditions adopted in this study was obviously indexed as monolithic TiAl₃. Whereas the thickness of IMC layer generated by annealing at 500 ℃ was approximately 100 nm scale, it drastically increased above 1.5 ㎛ when annealed at 600 ℃. Uniaxial tensile and peel tests were then performed to compare mechanical properties. As a result, the bonding strength drastically increased above 7.9 N/mm by annealing at 600 ℃, which implies that proper annealing condition was a prerequisite, to improving interface bonding strength as well as global elongation properties for Ti/Al/Ti 3-ply sheet.

• 대한방사선기술학회지:방사선기술과학
• /
• 제26권3호
• /
• pp.25-31
• /
• 2003

급성 허혈성 뇌경색 환자에서 Deconvolution 관류 전산화 단층촬영(computed tomography, CT)의 뇌혈류용적(cerebral blood volume, CBV), 뇌혈류(cerebral blood flow, CBF) 그리고 평균 조영제 통과 시간(mean transit time, MTT) 지도를 확산 강조(Diffusion weighted) MRI과 비교하여 그 유용성을 알아보고자 하였다. 뇌관류 CT와 확산강조 자기공명영상(diffusion weighted MR imaging, DWMRI)을 시행한 급성뇌경색 환자를 대상으로 Deconvolution 기법으로 획득한 CBV, CBF, MTT 지도에서 병변의 면적과 DWMRI의 병변의 면적을 비교 측정하여 일치도를 알아보았다. 또한, 병변 부위와 정상측 대칭부위의 MTT시간을 측정하여 차이를 알아보았다. 본 연구의 모든 예에서 CBV, CBF, 그리고 MTT 세 지도 모두 관류 결손을 인지할 수 있었고, 관류 결손이 인지되는 부위에서 MTT 시간의 현저한 지연이 있었다. 뿐만 아니라, MTT 지도의 결손부위 면적은 DWMRI 보다 크게 나타나 허혈성 패넘브라를 추측할 수 있었다. 결론적으로 Deconvolution 관류 CT의 지도를 이용하면 뇌경색의 조기진단뿐만 아니라 허혈 중심부, 그리고 허혈성 페넘브라를 예측할 수 있어 DWMRI에 비해 관류결손 부위의 혈류 역학적 상태의 평가나 효과적인 치료계획을 세우는데 보다 유용할 것으로 생각된다.

• Investigative Magnetic Resonance Imaging
• /
• 제18권1호
• /
• pp.25-33
• /
• 2014

목적: 확산강조영상 (DW-MRI)과 역동적 조영증강 자기공명영상 (DCE-MRI)에서 도출한 정량적 매개변수들이 서로 연관되어 있는지 알아보고자 하였다. 대상과 방법: 치료시작 전 DWI와 DCE-MRI를 시행한 조직학적으로 혹은 임상적으로 진단된 골전이암을 가진 13명의 환자를 대상으로 하였다. 주 병변의 겉보기 확산계수 (ADC) 그리고 관류지수 중 $K^{trans}$와 $V_e$ 값을 측정하여 Pearson 연관분석을 사용하여 통계적으로 분석하였다. 결과: 15개의 병변 중 11개는 ADC와 $K^{trans}$ 값 간에 유의한 상관관계를 보였다. 이 중 7개의 병변은 음의 연관성을, 그리고 4개는 양의 연관성을 보였다. 9개의 병변은 ADC와 $V_e$ 값 간에 유의한 상관관계를 보였다. 이 중 4개는 음의 연관성을, 그리고 5개는 양의 연관성을 보였다. 결론: 골전이암의 ADC 값과 $K^{trans}$ 값, 혹은 ADC 값과 $V_e$ 값은 일정한 연관성이 없었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.224-224
• /
• 2012

For decades, carbon fiber has expanded their application fields from reinforced composites to energy storage and transfer technologies such as electrodes for super-capacitors and lithium ion batteries and gas diffusion layers for proton exchange membrane fuel cell. Especially in fuel cell, water repellency of gas diffusion layer has become very important property for preventing flooding which is induced by condensed water could damage the fuel cell performance. In this work, we fabricated superhydrophobic network of carbon fiber with high aspect ratio hair-like nanostructure by preferential oxygen plasma etching. Superhydrophobic carbon fiber surfaces were achieved by hydrophobic material coating with a siloxane-based hydrocarbon film, which increased the water contact angle from $147^{\circ}$ to $163^{\circ}$ and decreased the contact angle hysteresis from $71^{\circ}$ to below $5^{\circ}$, sufficient to cause droplet roll-off from the surface in millimeter scale water droplet deposition test. Also, we have explored that the condensation behavior (nucleation and growth) of water droplet on the superhydrophobic carbon fiber were significantly retarded due to the high-aspect-ratio nanostructures under super-saturated vapor conditions. It is implied that superhydrophobic carbon fiber can provide a passage for vapor or gas flow in wet environments such as a gas diffusion layer requiring the effective water removal in the operation of proton exchange membrane fuel cell. Moreover, such nanostructuring of carbon-based materials can be extended to carbon fiber, carbon black or carbon films for applications as a cathode in lithium batteries or carbon fiber composites.

• 한국치위생학회지
• /
• 제18권1호
• /
• pp.9-18
• /
• 2018

Objectives: Pleurotus eryngii is used both for edible and medicinal purposes, and has a physiological activity. The purpose of this study is to investigate the antibacterial effect of Pleurotus eryngii against six oral pathogens (Staphylococcus aureus, Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, Streptococcus sobrinus, and Actinomyces viscosus). Methods: The antibacterial activities of various extracts of Pleurotus eryngii were examined by disc diffusion assay and minimum inhibitory concentration (MIC). The disc diffusion assay was performed by putting a paper disc soaked in extracts on plates inoculated bacterial cultures. The MIC of these extracts was determined by using a broth microdilution assay at a concentration ranging between 0.03 mg/ml to 15.00 mg/ml. The growth inhibition effect of extracts was measured at 600 nm for 24 hrs. Results: The antibacterial activity was confirmed against all six tested bacteria at Pleurotus eryngii ethyl acetate extract by the disc diffusion method. Acetone extract showed the antibacterial activity only against 4 strains containing Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, and Actinomyces viscosus. In ethanol extract, no activity was observed against other strains except Staphylococcus aureus. MIC values of ethyl acetate extract were the same, 7.50 mg/ml in all tested bacteria. Conclusions: Pleurotus eryngii exhibited the antibacterial activity against oral pathogens (Staphylococcus aureus, Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, Streptococcus sobrinus, and Actinomyces viscosus). Thus, Pleurotus eryngii may be considered as a natural antibacterial agent for treatment of dental diseases.