• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.581-584
• /
• 2008

염해환경에 건설되는 콘크리트 구조물은 염소이온과 같은 유해이온이 외부로부터 콘크리트 중으로 침투, 확산하여 철근을 부식시킴으로써 구조물의 내구성을 크게 저하시키기 때문에 구조물의 내구성 평가 또는 설계시 중요한 고려사항이 된다. 콘크리트 중의 염소이온 확산계수를 추정하는 방법은 Fick의 제1법칙으로부터 유도되는 정상상태(steady state)에서의 확산계수 평가방법과 Fick의 제2법칙으로부터 유도되는 비정상상태(non-steady state)에서의 확산계수 평가방법이 있다. 그러나, 실제 노출환경에서와 같은 비정상상태의 확산계수를 평가하는 것은 매우 어려우므로 실내에서 촉진방법에 의해 콘크리트의 확산특성을 간접적으로 평가하는 것이 일반적이다. 본 연구에서는 국내 또는 외국의 시험규격에 근거한 촉진 시험방법 중 4가지를 선정하여 동일 재령의 콘크리트 배합에 적용하여 그 결과를 비교 하였다. 실험결과에 따르면, ASTM C 1202 시험법은 콘크리트 배합간의 상대적인 구분만이 가능하며, 정상상태의 확산계수는 비정상 상태의 확산계수에 비해 1/10 정도 수준으로 작게 평가됨을 알 수 있다. 또한 침지시험에 의한 확산계수는 NT Build 492에 의한 결과와 유사한 값을 나타내었다.

• 대한화학회지
• /
• 제54권5호
• /
• pp.594-602
• /
• 2010

반도체의 경박단소화, 고밀도화에 따라 향후 반도체 패키지의 주 형태는 CSP(Chip Scale Package)가 될 것이다. 이러한 CSP에 사용되는 에폭시 수지 시스템의 흡습특성을 조사하기 위하여 에폭시 수지 및 충전재 변화에 따른 확산계수와 흡습율 변화를 조사하였다. 본 연구에 사용된 에폭시 수지로는 RE-304S, RE-310S, 및 HP-4032D를, 경화제로는 Kayahard MCD를, 경화촉매로는 2-methyl imidazole을 사용하였다. 충전재 크기 변화에 따른 에폭시 수지 성형물의 흡습특성을 조사하기 위하여 충전재로는 마이크로 크기 수준 및 나노 크기 수준의 구형 용융 실리카를 사용하였다. 이러한 에폭시 수지 성형물의 유리전이온도는 시차주사열량계를 이용하여 측정하였으며, 시간에 따른 흡습특성은 $85^{\circ}C$ and 85% 상대습도 조건하에서 항온항습기를 사용하여 측정하였다. 에폭시 수지 성형물의 확산계수는 Ficks의 법칙에 기초한 변형된 Crank 방정식을 사용하여 계산 하였다. 충전재를 사용하지 않은 에폭시 수지 시스템의 경우, 유리전이온도가 증가함에 따라 확산계수와 포화흡습율이 증가 하였으며 이는 유리전이온도 증가에 따른 에폭시 수지 성형물의 자유부피 증가로 설명하였다. 충전재를 사용한 경우, 충전재의 함량 증가에 따라 유리전이온도와 포화흡습율은 거의 변화가 없었으나, 확산계수는 충전재의 입자 크기에 따라 많은 변화를 보여주었다. 마이크로 크기 수준의 충전재를 사용한 경우 확산은 자유부피를 통하여 주로 이루어지나, 나노 크기 수준의 충전재를 사용한 에폭시 수지 성형물에서는 충전재의 표면적 증가에 따른, 수분 흡착의 상호작용을 통한 확산이 지배적으로 이루어진다고 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제17권3호
• /
• pp.67-81
• /
• 1989

This experiment was carried out to know the mothod of changing the step of moisture content schedule with time in conventional kiln drying. For the purpose of this object. we made drying model by applying the moisture diffusion model by J.FSiau(1984) to average moisture content equation by J.Crank(1956) derived it from Fick's second law. And to verify this method of drying model. 2.5cm-thick boards and 5.0cm-thick dimension lumbers of Pinus densiflora were kiln-dried with the schedule of T11-C3 and T10-C4, respectively. And then the drying rates were investigated and compared with those calculated from drying model. The results obtained were as follows 1. Average drying rate and total drying time of board to dry to 6.5% moisture content were 0.64%/hr and 109hr., and those of dimension lumber to dry to 8.3% moisture content were 0.4%/hr. and 162hr., respectively. 2. The moisture content of shell and core decreased by equalizing treatment and increased by conditioning treatment both on board and dimension lumber. But the moisture gradient was lower after conditioning than after equalizing. 3. As the drying was proceeded, the transverse bound water diffusion coefficient all but linearly decreased, the water vapor diffusion coefficient abruptly curvilinearly increased, while the transverse diffusion coefficient curvilinearly decreased both on board and dimension lumber. But each of diffusion coefficients on board was larger than that on dimension lumber. 4. Compared to experimential drying rate of board. theoretical drying rate was larger at 30.0%-21.8% moisture content range and was similiar at 21.8%-5.4% moisture content. And in case of dimension lumber, the drying rate was similiar at 30.0%-16.1% moisture content range but theoretical drying rate was much lower at 16.1%-8.3% moisture content range. 5. The possibility of adapting this drying model to changing the moisture content schedule step with time was in the range of 21.8%-5.4% moisture content on board. And in the case of dimension lumber that was in the range of 30.0%-16.1% moisture content.

• Journal of Radiation Protection and Research
• /
• 제12권2호
• /
• pp.28-36
• /
• 1987

원자력 시설에서 대기중으로 방출되는 방사성 구름에 의한 환경선량계산에는 Gaussian plume model 주로 사용되고 있으나, 바람의 분포나 대기의 흐트러짐이 공간적으로 일정하지 않은 복잡 지형에의 적용에는 문제가 있다. 복잡 지형을 고려한 기류계산에는 MATTEW, WIND04 코드가 그 타당성을 인정받고 있다. 이러한 코드의 원리를 기초로 하여, 질량보존법칙을 만족하는 이류 확산 방정식을 유한차분법으로 계산하고 풍속장을 구하였다. 입자 농도와 피폭선량은 방사성 구름을 입자군으로 근사시키는 PIC model을 이용하여 계산하였으며, 입자의 대기 확산은 Random Walk법을 이용하였다. 계산 결과, 지형에 의한 풍속, 풍향의 변화를 알 수 있었으며, 피폭선량분포를 구할 수 있었다.

• 한국전산유체공학회지
• /
• 제4권1호
• /
• pp.8-18
• /
• 1999

In devising a numerical approximation for the convective spatial transport of a fluid mechanical quantity, it is noted that the convective motion of a scalar quantity occurs in one-way, or from upstream to downstream. This consideration leads to a new scheme termed a pure upwind difference scheme (PUDS) in which an estimated value for a fluid mechanical quantity at a control surface is not influenced from downstream values. The formal accuracy of the proposed scheme is third order accurate. Two typical benchmark problems of a wall-driven fluid flow in a square cavity and a buoyancy-driven natural convection in a tall cavity are computed to evaluate performance of the proposed method. for comparison, the widely used simple upwind scheme, power-law scheme, and QUICK methods are also considered. Computation results are encouraging: the proposed PUDS sensitized to the convection direction produces the least numerical diffusion among tested convection schemes, and, notable improvements in representing recirculation of fluid stream and spatial change of a scalar. Although the formal accuracy of PUDS and QUICK are the same, the accuracy difference of approximately a single order is observed from the revealed results.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.64-68
• /
• 2014

This paper introduces the use of a crown-shaped (CR) lens to effectively diffuse the light from a light-emitting diode (LED) without any loss in the light intensity, in contrast to polymer-bulb-type diffusers. The diffusion lens was designed based on the Snell's law, which describes the physical path of a ray passing through the boundary between different media. CR lenses were fabricated by polydimethylsiloxane (PDMS) casting and UV-embossing processes, which used a pre-designed metal mold and UV-curable resin, respectively. Through experiments and optical evaluations, it was verified that the newly proposed CR lens not only decreased the vertical light strength and glare effect from an LED light source but also improved the diffusion characteristics while maintaining the quality of the LED's light intensity.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.1-11
• /
• 2003

확산에 관한 Fick 법칙 및 연속법칙을 사용하여 액체(눈물)-콘택트 렌즈-눈물 층을 통하여 각막으로 유입되는 산소 flux 및 각막 표면의 산소 분압을 계산할 수 있는 일련(一連)의 방정식을 세우고 이들 식에 의거하여 피팅에 따른 눈물 층의 두께, 콘택트 렌즈의 Dk 및 두께 변화가 각막에 유입되는 산소 flux에 어떠한 영향을 미치는가를 예측하였다. 본 모델을 사용하여 적절한 피팅 조건에 부합하고 또한 각막 표면의 산소 분압이 보장되는 콘택트 렌즈의 Dk 및 두께를 결정할 수 있다. 대단히 높은 Dk값을 지닌 콘택트 렌즈라도 너무 flat 또는 tight하게 피팅된 경우 콘택트 렌즈의 주변부와 각막 사이 눈물 층의 간격이 커짐으로 인하여 각막 주변부에 도달하는 산소 flux 및 각막 주변부 표면의 산소 분압이 급격히 감소하게 될 수 있다.

• Computers and Concrete
• /
• 제8권5호
• /
• pp.511-524
• /
• 2011

Although concrete is believed to be a durable material, concrete structures have been degraded by severe environmental conditions such as the effects of chloride and chemical, abrasion, and other deterioration processes. Therefore, durability evaluation has been required to ensure the long term serviceability of structures located in chloride exposed environments. Recently, probability-based durability analysis and design have proven to be reliable for the service-life predictions of concrete structures. This approach has been successfully applied to durability estimation and design of concrete structures. However, currently it is difficult to find an appropriate method engineers can use to solve these probability-based diffusion problems. In this paper, computer software has been developed to facilitate probability-based durability analysis and design. This software predict the chloride diffusion using the Monte Carlo simulation method based on Fick's second law, and provides durability analysis and design solutions. A graphic user interface (GUI) is adapted for intuitive and easy use. The developed software is very useful not only for prediction of the service life but for the durability design of the concrete structures exposed to chloride environments.

• Nuclear Engineering and Technology
• /
• 제42권2호
• /
• pp.183-192
• /
• 2010

An electrochemical reduction of a mixture of metal oxides was conducted in a LiCl molten salt containing 3 wt% $Li_2O$ at $650^{\circ}C$. The oxide reduction was carried out by applying a current to an electrolysis cell, and the $Li_2O$ concentration was analyzed during each run. The concentration of $Li_2O$ in the electrolyte bulk phase gradually decreases according to Faraday's law due to a slow diffusion of the $O^{2-}$ ions. A hindrance effect of the unreduced metal oxides was observed for the reduction of the uranium oxide. Cs, Sr, and Ba of high heat-load fission products were diffused into and accumulated in the salt phase as predicted with thermodynamic consideration.

• 한국환경과학회지
• /
• 제18권12호
• /
• pp.1325-1330
• /
• 2009

The fumigant 1,3-dichloropropene (1,3-D) was recently proposed as a direct replacement for methyl bromide ($CH_3Br$) in soil fumigation. This study was conducted to better understand behavior phase partitioning, diffusion and volatilization of 1,3-D as affected by isomer. The Henry's law constant(KH) of cis-1,3-D and trans-1,3-D was 0.058 and 0.037 at $20^{\circ}C$, respectively. $K_H$ of cis form of 1,3-D was higher than that of trans form of 1,3-D. To compare with volatilization of 1,3-D isomer, soil column [70 cm (length)${\times}$12 cm (i.d.)] included a shank injection at 30 cm with 300 kg $ha^{-1}$. Maximum cis-1,3-D and trans-1,3-D concentration reached 57 mg $L^{-1}$ and 39 mg $L^{-1}$ at 30 cm depth at 1h after application. Cumulatively, after 10 days, 51.8% and 43.57% of applied cis-1,3-D and trans-1,3-D was emitted via volatilization, respectively. The total losses of cis-1,3-D were significantly greater than that of trans-1,3-D. Finally, cis-1,3-D and trans-1,3-D, such as isomer are dominant of 1,3-D fates in soil.