• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.206-213
• /
• 1996

Third order correlation funciton is to be advantageous to detect unique features embedded in various random signals that are undetectable with second order correlation or power spectrum. In this paper, we will introduce optical modulator which consists of a laser light source, 2-dimensional ultrasonic diffractor cell with signal controlling circuitry, and a CCD camera connected to personal computer for image processing. With this modulator, the third order correlaiton pattern of signal can be immediately obtained at the camera due to parallel nature of optical computing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1732-1736
• /
• 2006

여수로는 월류시 한계류 상태와 고유속의 사류상태가 복합적으로 일어나는 복잡한 흐름형태를 가지고 있어 여수로의 단면설계시 수리적인면뿐만 아니라 구조적인 측면에서도 안정해야 하며 경제성이 고려되어야 한다. 그래서 고유속의 흐름을 갖는 여수로에 축소부를 고려할 경우 충격파에 의한 수위상승과 하류의 흐름 교란 등 수리학적인 불안정이 발생하기 때문에 설계시 경제적인 장점이 있음에도 불구하고 단면축소부를 고려하여 여수로를 설계하는 것은 현실적으로 많은 어려움이 있다. 본 연구에서는 단면축소를 고려한 여수로 설계를 위하여 3차원 수치모형인 Flow-3D를 이용하여 충격파로 인하여 발생하는 교차파 저감을 모의하기 위하여 수치실험을 실시하였다. 교차파 저감을 위해 축소부내에서 교차파가 발생하도록 축소부의 각도는 유입흐름 특성을 고려하여 적정하게 설정하였다. 수치실험결과 축소부의 각도가 작을수록 첫번째 교차파의 수위는 크게 발생하지 않으나 단면축소후 교차파가 하류로 전파되어 불안정한 흐름이 연속적으로 발생하고, 과대하게 설정할 경우 첫번째 발생하는 교차파에 의해 중앙부의 수위가 크게 상승하는 결과를 보였다. 또한 본 연구에서는 축소부단면내 회절판(diffractor) 설치전 후의 수리학적 거동을 모의하여 회절판의 흐름개선 효과를 검증하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.85-90
• /
• 2002

This study aims to propose a fundamental report for pozzolan reaction of discarded Bentonite by heat-treatment as concrete mineral admixture. As discarded bentonite is clay mineral to contain a great quantity a lot of $SiO_2$ and $Al_{2}O_{3}$, it is anticipated to reveal pozzolan reaction ability by heat-treatment. To find out pozzolan reaction ability of discarded Bentonite slurry by heat-treatment, the experiment is excuted Phenolphtalein test, setting test, pH test and the analysis by X-ray diffractor. As a result of this study, discarded Bentonite slurry can be utilized as concrete mineral admixture by heat-treatment and especially, pozzolan reaction ability of discarded Bentonite slurry is superior to the situation of 50$0^{\circ}C$~$700^{\circ}C$, 60min.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.1000-1009
• /
• 2004

The environment friendly calcareous deposit films were formed on steel plates by electrodeposition technique in natural seawater and synthetic solutions such as dissolved $\textrm{Mg}^{2+}$ and $\textrm{Ca}^{2+}$ ions at various potential conditions. The influence of potential conditions on composition ratio, structure and morphology of the electrodeposited films were investigated by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray diffractor (XRD). Accordingly, this study was provided a better understanding of the composition between the growth of $\textrm{Mg(OH)}_2$ and that of $\textrm{CaCO}_3$ during the formation of calcareous deposit films on steel substrate under cathodically electrodeposition in synthetic and natural seawater. The results showed that the formation of good overall calcareous deposited film in seawater can be achieved by controlling the Ca/Mg ratio according to interfacial pH with the effective use of the electro deposition technique.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.139-146
• /
• 2000

The development of high performance materials is very important subject in order to enhance the properties of bearings whose role is to transfer energy harmoniously by reducing the problem of friction and wear down, etc. between the interacting solid surfaces in relative motion under high loads in comply with mechanical operating mechanism of engines. In this study, several (100-x)Al-xSn coating films (where x=85, 75, 65 atomic % at Al) on substrates which are abt. 2mm thickenss of Kelmet layer sintered back steel were prepared by using RF sputtering system. These coating films were observed the morphology by SEM(Scanning Electron Microscope) and investigated the crystal structure by XRD(X-ray Diffractor) for their properties. And friction coefficient of these films was measured by ball-on-disc tester for their tribological properties. From the experimental results, it was shown that high performance properties of bearing can be improved greatly by controlling the composition and morphology of material surface with effective use of the plasma-assisted sputtering process.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.3
• /
• pp.139-146
• /
• 2002

As the bentonite is main material to prevent from collapse of drilling hole at underground excavation works, it is increased using quantity on construction industry day by day. But, the discarded bentonite that is over using at underground excavation works is caused various environmental trouble as soil and water pollution est. This study aims to propose a foundamental report for pozzolan reaction of discarded Bentonite powder by heat-treatment and cooling as concrete mineral admixture. To find out pozzolan reaction ability of discarded Bentonite powder by indirect cooling & cooling using of water after heat-treatment, the experiments are excuted Phenolphtalein test, setting test, pH test and the analysis by X-ray diffractor. As a result of this study, discarded Bentonite powder can be utilized as concrete mineral admixture by heat-treatment and especially, pozzolan reaction ability of discarded Bentonite powder is superior to the situation of 50$0^{\circ}C$~$700^{\circ}C$, 60min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.249-252
• /
• 2003

The microwave dielectric properties of $0.7Mg_4Ta_2O_9-0.3TiO_2$ ceramics were investigated. All samples were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature by X-ray Diffractor meter. According to. the X-ray diffraction patterns of the $0.7Mg_4Ta_2O_9-0.3TiO_2$ ceramics, major phase of the hexagonal $Mg_4Ta_2O_9$ were appeared. In the case of $0.7Mg_4Ta_2O_9-0.3TiO_2$ ceramics sintered at $1400^{\circ}C$, dielectric constant, quality factor and temperature coefficient of resonant frequency were 11.72, 126,419GHz, $-31.82ppm/^{\circ}C$, respectively.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1589-1591
• /
• 2003

The microwave dielectric properties of $TiTe_3O_8-CaF_2$ ceramics were investigated. All sample of $TiTe_3O_8-CaF_2$ ceramics were prepared by the conventional mixed oxide method, and sintered in the temperature of $730^{\circ}C{\sim}750^{\circ}C$. The structural properties of $TiTe_3O_8-CaF_2$ ceramics were investigated by the X-ray diffractor meter. According to the X-ray diffraction patterns of $TiTe_3O_8-CaF_2$ ceramics, the major phase of the cubic $TiTe_3O_8$ were presented. In the case of $1molTiTe_3O_8-0.1molCaF_2$ ceramics sintered at $740^{\circ}C$ for 5hr., the bulk density, dielectric constant, quality factor were $2.8g/cm^3$, 39.1, 36.100GHz, respectively.

• Journal of Surface Science and Engineering
• /
• v.33 no.5
• /
• pp.319-328
• /
• 2000

Silver is known to have such characteristics as low shear strength, good transfer-film forming tendency, and good corrosion resistance. Silver thin films have been prepared by ion plating of physical vapour deposition (PVD) using both argon gas pressure and bias voltage of processing condition. After the silver films were prepared, the properties in them were examined by gas pressure and bias voltage of substrate. Their morphology and crystal orientation were investigated by scanning electron microscopy (SEM) and X-ray diffractor. The properties of film were, also, studied to relate with morphology, X-ray diffraction pattern, and friction coefficient at vacuum ambient. The friction coefficient was stabilized remarkably on deposited films with increasing argon pressure for deposition. Also, the effect of increasing of the bias voltage for deposition resulted in lower friction coefficient and stability in $1.7$\times$10^{-4}$ torr. On the contrary, behavior of friction coefficient was stabilized on deposited films with decreasing the bias voltage in $1.7$\times$10^{-5}$ torr for deposition.

• Journal of Surface Science and Engineering
• /
• v.37 no.5
• /
• pp.253-262
• /
• 2004

Calcareous deposits are the consequence of pH increase of the electrolyte adjacent to metal surface affected by cathodic current in seawater. It obviously has several advantages over conventional coatings, since the calcareous deposit coating is formed from coating (Mg$^{2+}$, $Ca^{2+}$) naturally existing in seawater. In consideration of this respect, environment friendly calcareous deposit films were formed by an electro deposition technique on steel substrates submerged in 48$^{\circ}C$ natural seawater. And the influence of current density, coating time and attachment of steel mesh on composition ratio, structure and morphology of the electrodeposited films were investigated by Scanning Electron Microscopy(SEM), Energy Dispersive Spectroscopy(EDS) and X-Ray Diffractor(XRD), respectively. Accordingly, this study provides a better understanding of the composition between the growth of $Mg(OH)_2$ and $CaCO_3$ during the formation of electro deposit films on steel substrate under cathodically electrodeposition in $48^{\circ}C$ natural seawater. The Mg compositions, in general, are getting decreased regardless of current density but Ca compositions are getting increased as electrodeposition time runs. That is, $Mg(OH)_2$ compounds of brucite structure shaped as flat type is formed at the initial stage of electrodeposition, but CaCO$_3$ compounds of aragonite structure shaped as flower type is formed in large scale. Besides, $Mg(OH)_2$ compounds were much formed at 5 A/$\m^2$ environment condition compared to the 3 A/$\m^2$ and 4 A/$\m^2$ environment conditions. This is because that OH- which was comparatively largely generated at the metal surface is preferably combined with $Mg^{2+}$TEX>.