• 비파괴검사학회지
• /
• 제36권1호
• /
• pp.1-8
• /
• 2016

Single crystalline silicon wafers having (100), (110), and (111) directions are employed as specimens for obtaining slowness profiles. Leaky Lamb waves (LLW) from immersed wafers were detected by varying the incident angles of the specimens and rotating the specimens. From an analysis of LLW signals for different propagation directions and phase velocities of each specimen, slowness profiles were obtained, which showed a unique symmetry with different symmetric axes. Slowness profiles were compared with elastic moduli of each wafer. They showed the same symmetries as crystal structures. In addition, slowness profiles showed expected patterns and values that can be inferred from elastic moduli. This implies that slowness profiles can be used to examine crystal structures of anisotropic solids.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2002년도 춘계 학술발표회 논문집
• /
• pp.85-90
• /
• 2002

Microarray technology allows the monitoring of expression levels for thousands of genes simultaneously. In time-course experiments in which gene expression is monitored over time we are interested in testing gene expression profiles for different experimental groups. We propose a statistical test based on the ANOVA model to identify genes that have different gene expression profiles among experimental groups in time-course experiments. Using this test, we can detect genes that have different gene expression profiles among experimental groups. The proposed model is illustrated using cDNA microarrays of 3,840 genes obtained in an experiment to search for changes in gene expression profiles during neuronal differentiation of cortical stem cells.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.371-376
• /
• 2001

Radiative transfer by nongray gas mixtures with nonuniform concentration and temperature profiles were studied by using the statistical narrow-band model and ray-tracing method with the sufficiently accurate $T_{60}$ quadrature set. Transmittances through the nonhomogeneous gas mixtures were calculated by using the Curtis-Godson approximation. Three different cases with different temperature and concentration profiles were considered to obtain benchmark solutions for nongray gas mixtures with nonuniform concentration and temperature profiles. The solutions obtained from this study were verified and found to be very well matched with the previous solutions for uniform gas mixtures. The results presented in this paper can be used in developing various solution methods for radiative transfer by nongray gas mixtures.

• ETRI Journal
• /
• 제27권5호
• /
• pp.563-568
• /
• 2005

A motion-control chip contains major functions that are necessary to control the position of each motor, such as generating velocity command profiles, reading motor positions, producing control signals, driving several types of servo amplifiers, and interfacing host processors. Existing motion-control chips can only generate velocity profiles of fixed characteristics, typically linear and s-shape smooth symmetric curves. But velocity profiles of these two characteristics are not optimal for all tasks in industrial robots and automation systems. Velocity profiles of other characteristics are preferred for some tasks. This paper proposes a motion-control chip to generate velocity profiles of desired acceleration and deceleration characteristics. The proposed motion-control chip is implemented with a field-programmable gate array by using the Very High-Speed Integrated Circuit Hardware Description Language and Handel-C. Experiments using velocity profiles of four different characteristics will be performed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.1-4
• /
• 2007

The current profiles in a coated conductor with transport current were calculated using an iterative inversion method from the data of the magnetic flux density profiles measured. The applied current was increased from 0 to 60 A by 10A step and decreased down to -60A by 20A step. The magnetic flux profiles were measured at a distance of 400 mm above the surface of the coated conductor using a scanning hall probe method. The current profiles calculated were very different from the Bean model: current density profile is not a constant in the critical region. However the aspect of the change of the current and magnetic flux density profiles in the case of decreasing applied current are similar to the theoretical calculations in Brandt's paper.

• 디지털콘텐츠학회 논문지
• /
• 제7권1호
• /
• pp.25-33
• /
• 2006

유비쿼터스 시대가 도래함에 EK라 플랫폼 프로파일을 표현하는 다양한 방법들이 논의되었고 표준으로 발표되고 있다. 이러한 다양한 플랫폼 프로파일들은 몇 가지 문제점을 안고 있는데 이러한 문제점을 해결하기 위해, 다양한 프로파일을 인식하고 프로파일의 단순화를 통하여 적응화 엔진의 성능을 향상 시키는 프로파일 처리 방식을 제안하고 프로파일링 매커니즘을 개발한다. 즉, 서로 다른 적응화 시스템에서 사용하는 프로파일을 인식하지 못하는 문제를 해결하기 위한 여러 프로파일의 통합방식을 제시하고, 프로파일의 속성을 필수 속성 및 유사 값으로 그룹핑하여 프로파일의 단순화를 실현한다. 이 시스템을 통하여 기존 적응화 시스템에 비교하여 다양한 프로파일 형식의 사용자 요청을 처리할 수 있게 되고, 컴팩트한 프로파일은 콘텐츠 적응화 시스템을 운영하며 동적으로 생성되는 프로파일의 개수를 대폭 줄이게 되어 메모리 사용을 줄이고 콘텐츠 변환의 횟수를 줄이면서 적응화 엔진의 성능을 향상시키는데 기여한다.

• International Journal of Fluid Machinery and Systems
• /
• 제8권2호
• /
• pp.94-101
• /
• 2015

To investigate the influence of blade profiles on cavitation behavior in impeller of centrifugal pump, a centrifugal pump with five different blade profiles impellers are studied numerically. The impellers with five different blade profiles (single arc, double arcs, triple arcs, logarithmic spiral and linear-variable angle spiral) were designed by the in-house hydraulic design code using geometric parameters of IS 150-125-125 centrifugal pump. The experiments of the centrifugal pump have been conducted to verify numerical simulation model. The numerical results show that the blade profile lines has a weak effect on cavitation inception near blade inlet edge position, however it has the key effect on the development of sheet cavitation in impeller, and also influences the distribution of sheet cavitation in impeller channels. A slight changing of blade setting angle will induce significant difference of cavitation in impeller. The sharp changing of impeller blade setting angle causes obvious cavitation region separation near the impeller inlet close to blade suction surface and much more flow loss. The centrifugal pump with blade profile of setting angle gently changing (logarithmic spiral) has the super cavitation performance, which means smaller critical cavitation number and lower vapor cavity volume fraction at the same conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권5호
• /
• pp.700-711
• /
• 2017

Objective: The current study aimed to investigate the impact of high-fat diets composed of different animal and vegetable fat sources on serum metabolic health markers in Japanese quail, as well as the overall lipid content and fatty acid profiles of the edible bird tissues following significantly increased dietary lipid supplementation. Methods: Fifty seven male quail were divided into six groups and fed either a standard diet or a diet enriched with one of five different fats (22% coconut oil, lard, palm oil, soybean oil, or sunflower oil) for 12 weeks. The birds were subjected to an oral glucose tolerance test following the feeding period, after which they were euthanized and blood, liver, breast, and thigh muscle samples collected. Total fat content and fatty acid profiles of the tissue samples, as well as serum uric acid, triglyceride, cholesterol, total protein, albumin, aspartate transaminase, and total bilirubin concentrations were assessed. Results: High-fat diet feeding had no significant effects on the glucose tolerance of the birds. Dietary fatty acid profiles of the added fats were reflected in the lipid profiles of both the liver and breast and thigh muscle tissues, indicating successful transfer of dietary fatty acids to the edible bird tissues. The significantly increased level of lipid inclusion in the diets of the quail used in the present study was unsuccessful in increasing the overall lipid content of the edible bird tissues. Serum metabolic health markers in birds on the high-fat diets were not significantly different from those observed in birds on the standard diet. Conclusion: Thus, despite the various high-fat diets modifying the fatty acid profile of the birds' tissues, unlike in most mammals, the birds maintained a normal health status following consumption of the various high-fat diets.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.123.1-123
• /
• 2003

The objective of this work was to analyze the population of sequence variants of citrus tristeza virus (CTV) isolates in Korea and to make the phylogeny trees of CTV in Korea. We also tried to analyze and find the mild strain of CTV to apply for the cross protection. The CTV isolates from yuzu (C. Junos) collected from different geographic areas of Southern provinces such as Namhae-Do, Kerche-Do, Bosung, Wan-Do and Koheung and Jeju-Bo, Korea were used for SSCP analysis. The SSCP profiles of the cDNAS obtained by RT-PCR with primers specifically designed for the p20 of the CTV population. The SSCP profiles obtained from 150 PCR products in yuzu contained two or three DNA bands, whereas, in some case, others contained four or more bands of similar intensity. The pathologically mild isolates of CTV usually yielded two DNA bands by SSCP profiles, whereas the SSCP profiles of the most virulent isolates contained more than two DNA bands. Plants shown severe stem pitting were corresponded to those plants with typical SSCP profiles of severe strains, and vice versa. This results indicate that the primers designed for SSCP analysis can be used for distinguishing the mild strains from severe strains of CTV.

• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.169-174
• /
• 2007

We measured the field profiles, H(x)'s of coated conductors by using scanning Hall probe method when various magnetic fields, $H{_\alpha}'s$ or currents, I's were applied. From the measured field profiles, we calculated the current profiles, J(x)'s by the inversion method. The calculated J(x)'s of coated conductors show some different properties from the standard critical state model. $J{_c}'s$ are inhomogeneous varying with the positions and are not constant when $H_{\alpha}$ or I changes. And when I decreases the features of current reversion are remarkably different from the model.