Eom, Ji Hyun;Vu, Thi Phuong Duyen;Cai, Linxi;Zhao, Yan;Li, Hong Xu;Yang, Seo Young;Kim, Young Ho;Kim, Seok Jin;Cho, Hyun So;Bao, Haiying;Chem, Jianbo;Kim, Kyung Tae;Kang, Jong Seong
분석과학
/
제30권3호
/
pp.130-137
/
2017
The leaves (Mori Folium; MF), branches (Mori Ramulus; MR), and root bark (Mori Cortex Radicis; MCR) of the mulberry tree have been used as therapeutic herbs for centuries. Existing analytical methods were developed specifically for different parts of the tree and cannot be applied to samples containing a mixture of tree parts. Such method specialization is time-consuming and requires separate identification and quality control of each tree part. This report describes an HPLC method for the simultaneous quality control and discrimination of MF, MR, and MCR using four marker compounds: rutin, kuwanon G, oxyresveratrol, and morusin. An Optimapak $C_{18}$ column ($4.6{\times}250mm$, $5{\mu}m$) was used with a gradient elution of 0.1 % formic acid in water and acetonitrile. The flow rate was 1.0 mL/min and the detection wavelength was 270 nm. In quantitative analyses of the three parts, rutin (0.11 % w/w) was detected only in MF. The oxyresveratrol content (0.12 % w/w) was highest in MR. Kuwanon G (0.33 % w/w) and morusin (0.18 % w/w) were higher in MCR than in other parts. The HPLC method given herein can be used to simultaneously classify and quantify three herbal medicines from the mulberry tree.
This experiment was carried out in order to estimate the recovery days of root and stubble to the days after cutting, and contribution of specific stubble weight on the regrowth was examined using the relationships between the dry weight of shoot and yield components, and regrowth parameters by the days after cutting. The varieties examined were Maprima, Manhattan, Tove, Peramo, Caliente, Tempo and P-2 grown under individual plant basis. The results are may be summarized as follows: 1. Dry weight of root and stubble were recovered up to 13.5 and 11 days after cutting, respectively. 2. Dry weight of shoot(regrowth parts+stubble) was affected significantly by the varieties, stages of regrowth and variety x stage of regrowth. 3. The variety with tiller weight type showed higher average productivity of shoot than those of the variety with tiller number type. 4. Absolute growth rate(AGR) of shoot was correlated significantly with regrowth parts, stubble, root and weight of a tiller at the early stage of regrowth(up to 12 days after cutting), and correlated with regrowth parts, stubble, weight of tiller and stubble area at the late stage of regrowth(up to 20 days after cutting). 5. Contribution of specific stubble weight to absolute growth rate of shoot was different between the stages of regrowth. Thus, regrowth parts per specific stubble weight(RP1SSbW) and weight of tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the early stage of regrowth, and efficiency of specific stubble weight(ESSbW), regrowth parts per specific stubble weight (RPISSbW) and weight of a tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the late stage of regrowth. 6. Regrowth utilization rate(RUR) was one of the useful regrowth parameter to indicate the regrowth potential of grasses.
The purpose of this study is to examine the functionality with material-improved working uniform(protocol, P) and current working uniform(control, C). Movement functionality evaluation of material-improved working uniform was carried out through sensory evaluation of working uniform. And Oxygen uptake was explored to different working uniform(P, C) in relation to a physiological functionality measurement. The results have been shown as follows: It was found that the workers feel uncomfortable with the parts of the wrist, the back width, the shoulder seam and the side in the current working uniform when they move their arms up and down, but the inconvenience has been reduced in the material-improved working uniform. And It was found that the workers feel uncomfortable with the parts of the back width, the wrist and the side seam of the jacket, and the waist, the hips and the thigh of the trousers in the current working uniform when they move their waist, but the inconvenience has been reduced in the material-improved working uniform. In the current working uniform, it was also found that they feel uncomfortable with the parts of the horse riding position in which they stand straight in their slightly bended knees, with the parts of the hips, the side seam, the thigh and the knees when they crouch down, and with the parts of the hips and the thigh when they put one of their legs onto a higher place. However, the inconvenience was reduced in the material-improved working uniform. Oxygen uptake, which was measured to assess physiological dressing functionality, was found to be higher when people work in an uncomfortable uniform than when they work in a uniform of better functionality by an increase in metabolic rate, which can be a cause of workers' inefficiency of fatigue.
용접구조에 있어서 가장 위험한 단면은 용접부이며 대부분의 파괴가 용접부로부터 발생하였다. 따라서 용접부의 파괴거동을 확인하는 것은 파괴방지를 위하여 중요한 요소라 할 수 있다. 본 연구는 용접부의 파괴거동에 관한 기초적인 연구로서 용접부의 국부적인 인성분포와 다층용접의 효과 및 잔류응력제거풀림의 효과를 조사하였다. 연구에 사용된 기본소재로서는 피로이력을 갖고 있는 강재와 피로이력이 없는 강재를 선택하였다. 용접부에서 미사용강재(피로이력이 없는 강재)모재, 열영향부 용착금속의 파괴인성이 각각 차이가 있었고 용착금속은 균열저지능력으로서 파괴인성이 가장 작아서 파괴발생원이 될수 있음을 확인하였다. 특히 본연구의 대상강재인 기사용강재(피로이력을 갖고 있는 강재)는 파괴인성이 용착금속 보다 작아서 균열이 존재하는 경우 가장 취약한 단면이 될수 있다는 것을 확인하였다. 다충용접은 용접부에 결합이 존재하지 않는다면 안정개선에 효과가 있음을 확인하였고 또한 잔류응력제거 풀림은 본연구에 관한 한은 효과가 없는 것으로 밝혀졌다.
글로벌 생산 네트워크는 다국적기업들이 전략적으로 자사의 가치사슬을 단계별로 분리하여 다양한 지역으로 이전시키면서 나타나기 시작하였다. 글로벌 생산 네트워크는 자재, 부품, 소재, 그리고 완제품의 빈번한 운송을 수반하고, 신속하고 효율적인 운용을 요구하기 때문에 역외보다는 통합된 지역 내에서 더욱 발달하였다. 여러 해의 자료를 심층 분석한 결과, 해당 지역 내에서 고부가가치 상품의 생산에 비교우위를 지닌 선진국들은 ICT 부품과 소재의 생산에 특화하며 높은 수출 현시비교우위지수를 보였다. 반면에 노동집약적인 조립 공정에 비교우위를 가진 개도국들은 높은 수입 현시비교우위지수를 보여주었다. 일부 개도국들은 글로벌 생산 네트워크 참여를 통해 꾸준히 기술역량을 제고하면서 산업구조 고도화 발전을 이룰 수 있었음 또한 자료 분석 결과 알 수 있었다. 동아시아 국가들은 다양한 요인들로 인해 EU나 NAFTA 지역 국가들에 비해 글로벌 생산 네트워크에 많이 참여하였는데, 해당 국가들의 ICT 분야 기술발전 속도 및 수출의 빠른 증가세가 보여주듯이 동아시아 국가들은 글로벌 생산 네트워크 참여로 크게 수혜하였다. 그러나 이는 결과적으로 ICT 부품과 소재 산업에 있어서 글로벌 생산 네트워크의 지역별 구축 정도에 상당한 불균형을 야기하였음을 확인할 수 있었다.
An injector is a mechanical device present inside the engine. Its main function is to supply an appropriate volume of fuel into the combustion chamber, which is directly related to the overall engine efficiency of a car. During the operation of an injector, a magnetic force lifts the parts of the injector from closed position to open position which generates a horizontal force on the needle. The horizontal force acts on a different position from that of the center of mass of the needle. Therefore, this causes eccentricity in the needle and the generation of a tilting motion during the lifting operation which can result in wear. However, appropriate selection of clearances for these parts can prevent wear. In this study, lubrication analysis is conducted to determine the optimum clearance of parts with sliding motion inside the injector. The height functions are derived considering the dynamic behavior and relative velocity of the parts. Using the derived height function, the pressure profiles are calculated for the lubricated surfaces from the Reynolds' equation. Subsequently, the fluid reaction forces are calculated. The equations of motions are applied to the fluid reaction forces and external forces are solved to calculate the minimum film thickness between each part with variation in the clearances. Finally, the optimum clearances are determined. The effect of the clearances on the behavior of the moving parts is presented and discussed.
One-hundred eighty four medical doctors and 349 nurses out of 6 university hospitals and 1 general hospital were surveyed from Mar. 3, to Mar. 31, 1995, in order to appreciate the extent of their understandings on the clinical nurse specialist system. The difference was analyzed by the subjects' age, their position and department, the expected benefits of the system. the assigned department, the position and qualification, the required special educational organization and program, and the extent of autonomy of the function of clinical nurse specialists and the special nursing field. The results were as follows ; 1. The perception about the expected benefits of the introduction of clinical nurse specialist system was significantly different among the age groups of medical doctors, and the age group of 40s among them showed the most positive perception. 2. The extent of acquaintance with clinical nurse specialist was the higher in the older age groups of respondent nurses. Meanwhile, the experience of participation with clinical nurse specialists was the more in the older age group of medical doctors. 3. The opinion about the required position of clinical nurse specialists was significantly different by the age and position of the respondent nurses. The rank of head nurse was suggested by the respondent nurses of older age and higher positon, while the level of in-charge nurse was suggested by the staff nurses. Also, the duration of clinical experience required of clinical nurse specialists was the most frequently responded as 6 to 10 years by nurses, as 2 to 5 years by medical doctors. 4. The degree of educational background required of clinical nurse specialists was differently responded by the various position of medical doctors and nurses. Of the medical doctors, professors frequently responded bachelor degree and medical residents frequently responded master degree as the required educational background. Of the nurses, nursing administrators more frequently responded that master degree was required of clinical nurse specialists than staff nurses and clinical nurse specialists did. 5. The extent of acquaintance with clinical nurse specialist system was different among the various department of medical doctors, which was the highest in the doctors of psychiatry, internal medicine and pediatrics, respectively. The doctors of surgery were the least acquainted of clinical nurse specialist. 6. The nurses of special parts, of surgery and of obstetrics & pediatrics responded more frequently that clinical nurse specialists should belong to the nursing department than the nurses of internal medicine and of others did. 7. The Special parts that necessitate clinical nurse specialists were responded to be the more important by nurses than by medical doctors. Clinical nurse specialists were responded to be the more necessary in the parts of diabetics, oncology, pyschiatry, dialysis, organ transplantation, intensive care, and in cardiovascular part. They were responded to be the less important in the parts of intravenous therapy, computer informatics, nursing administration, the improvement of nursing quality.
재식밀도가 수도의 부위별 건물의 배분에 미치는 영향을 검토하고자 통일계인 삼강벼와 일반계인 추청벼를 1988년 5월 30일과 6월 15일에 3.3$m^2$당 72주, 90주 및 120주로 이항재배하여 조사한 결과를 요약하면 다음과 같다. 1. 공시품종 다같이 출수 20일전과 출수기의 단위면적당 총건물중은 5월 30일 이앙이 6월 15일 이앙보다 많았으며, 두 이앙기 모두 재식밀도가 높아질수록 건물중이 증가하였는데, 부위별 건물중의 변화도 총건물중과 같은 경향이었다. 2. 주당 총건물중 및 부위별 건물중도 5월 30일 이앙보다는 6월 15일 이앙에서 낮았으나, 단위면적당의 경우와는 달리 재식밀도가 높아질수록 감소하였다. 3. 동일한 이앙기와 재식밀도에서 엽신, 엽소 및 간의 건물중은 두 품종간에 차이가 적었으나, 삼강벼는 수중이 무거워서 총건물중이 추청벼보다 많았다. 4. 두 품종 모두 부위별 건물배분율은 이앙기나 재배밀도에 관계없이 생육시기별로 거의 일정하였다. 5. 이앙기와 재배밀도를 종합한 부위별 평균 건물배분율을 가지고 추정한 시기별 각 부위의 건물중은 실측한 건물중과 잘 일치하였다.
This study was performed to investigate correlation between total body weight loss and local sweat rate and to find out any possible method that can estimate total body weight loss judging from local sweat rate. Twelve adult females were kept at 44 $\pm1^{\circ}C$, 50 ${\pm}5\%$ R.H. (1) Physiological responses such as total body weight loss, local sweat rate, rectal temperature, skin temperature, blood pressure and pulse, (2) micro climate inside garment and (3) subjective sensation were examined. Two types of garment such as long-sleeves with long pants (Type I) and half·sleeves with short pants (Type II) were used to observe the effect of garment types on sweating response. Both clothing weight was equal (132$\pm$3 g/$m^{2}$). The results were as follows: 1. Regardless of the different types, total body weight loss was more interrelated with the sweat rate on forehead than any other parts of the body. Except the forehead, different parts of body with different types of garment influenced on body weight loss quite differently. 2. Total body weight loss was more interrelated with the weight gain of garment than the local sweat rate. 3. Under the environment of 44$\pm1^{\circ}C,\;50{\pm}5\%$R.H., body weight loss during 1 hour of subject clothed and silted was 275.2 g/hr and weight loss per body surface area was 178.9 g/$m^{2}/hr$ Garment types have no influences on total body weight loss. 4. Local sweat rate (mg/7.07 $cm^{2}/hr$) was 208.0,191.0, 133.0, 115.0,81 0, 75.1 and 66.3 on scruff, breast, forehead, forearm, thigh, upper arm, leg respectively No evidence has been found that garment types influenced on local sweat rate (p<0.1). 5. No interrelationships between rectal temperature and total body weight loss, local skin temperature and total body weight loss, and local skin temperature and local sweat rate were found. From this study, some possible method that we can estimate total body' weight loss judging from weight loss of garment. But considering the fact that clothing design factor, the physical characteristics of fabric and environmental factor such as humidity and wind velocity should be concerned in weight loss of garment, it should be studied further whether the total body weight loss can be estimated properly from the weight loss of garment. This experiment suggest that different parts of body with different types of garment can influence on body weight loss quite differently. Therefore, in order to get more precise results, more studies under the diversity of garment types should be done in the near future.
관룡사 약사전에 사용된 단청안료에 대해 과학적 분석을 실시하여 사용안료의 종류와 특성을 밝혀내고, 이를 약사전 벽화 뿐만아니라 대웅전 단청에 사용된 안료와도 비교하고자 하였다. 분석결과, 적색과 녹색, 백색계열의 안료는 채색 부위에 따라 전혀 다른 종류의 안료를 사용한 것으로 나타났으며, 여러 가지 색상구현을 위해 2종류 이상의 안료를 혼합하여 일부 사용하였다. 확인된 안료의 색상별 원료광물은 적색계열의 경우, 진사(Cinnaba)와 연단(Minium), 석간주(Hematite)이며, 백색계열은 합분(Oyster shell white)과 백토(White Clay), 녹색계열은 녹염동광(Atacamite)과 뇌록석(Celadonite)이었다. 또한 흑색계열은 먹(Carbon)이나 카본블랙(Carbon Black), 황색은 황토(Yellow Ocher)이며, 청색계열은 청람석(Lazulite)으로 확인되었다. 이러한 분석결과를 관룡사 내 약사전 벽화나 대웅전 단청에 사용된 안료의 연구결과와 서로 비교했을 때, 전체적으로는 비슷한 원료광물을 사용했으나 녹색이나 백색, 황색 등의 안료들에서 서로 다른 원료광물이 가감되어 사용되었음을 일부 확인하였다. 결국 같은 시기, 같은 사찰내에서도 회화의 종류나 대상건물에 따라 안료의 원료광물은 선택적으로 사용될 수 있다는 것을 보여주는 결과이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.