• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1084-1087
• /
• 2002

The guard-ring type 3-terminal parallel plate electrodes proposed by ASTM D 150-81 and IEC 250 have been widely used for measurement of dielectric constants of solid dielectrics. However the method using this electrodes causes many uncertainty associated with the measurement errors of the diameter of the guarded electrode. the gap between guarded and guard-ring electrode. the distance of two active electrodes(the thickness of specimen), the roughness and contamination of surface of electrode and specimen. close adherence grade of electrode and specimen. In this paper. a new electrode system of cross capacitance type based on Thompson-Lampard theorem is designed and is employed for the measurement of dielectric constant. The results of simulation of guard-ring electrode and cross capacitance electrode using FEM program show that distance measurement between two electrodes in guard-ring electrode produces large uncertainty. on the other hand this effect in cross capacitance electrode is negligible. Furthermore. the air gap effects in the cross capacitance electrode is 5.6 times less sensitive than that in guard-ring electrode by assuming air gap of $50{\mu}m$.

• 대한원격탐사학회지
• /
• 제13권2호
• /
• pp.151-163
• /
• 1997

본 논문에서는 동축선 끝단에서의 마이크로파 반사를 측정하여 수분 함유량을 산출하는 알고리즘을 제시한다. 전파 반사는 공기층과 토양층 사이의 유전율 변화에 의해 발생하므로 반사 계수에서 유전율을 얻는 기술을 연구하였다. 우선, 유전체에 접촉한 동축선 끝단의 등가회로를 선 정하여 미지의 회로 정수를 설정하였다. 다음에, 수분함유량을 알고 있는 토양을 측정하여 미지 회로 정수를 발견하고 반사 계수와 유전율의 관계식을 실험적으로 찾았다. 토양의 유전율은 주파 수, 토양 형태에도 영향을 받지만 주로 수분 함유량에 의해 결정되므로 기존의 실험식을 이용하 여 유전율로부터 수분 함유량을 계산할 수 있었다. 본 연구에서는 Network Analyzer을 이용하여 4.65 GHz에서 각종 토양의 반사 계수의 크기와 위상을 측정하기를 반복하여 복소수 형태의 유전 율과의 관계식을 산출하였다. 이 실험식은 다른 토양에 이용되어 그 정확도가 검증되었다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.268-272
• /
• 2014

This letter presents a measurement methodology of the complex permittivity of liquid using a partially open cavity in narrow band. The partially open cavity (POC) can measure dielectric small changes caused by the temperature variation of the liquid inside the cavity as well. Using the resonance frequency and unloaded quality factor of the proposed POC, the complex permittivity is evaluated. The apertures on the walls of the cavity are designed to circulate the liquid inside to outside of the POC and located at the corner area of the cavity to minimize the disturbance of field distribution at the dominant mode. The results measured by the proposed POC were compared with those by the conventional open-ended probe and Cole-Cole equation. The POC showed better performance in measuring small dielectric constant changes than the open-ended probe.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.119-122
• /
• 2003

This paper describes characteristics for insertion losses of Isolator have an effect on material parameter. One purpose of the paper is to present insertion loss on this resonator for magnetic loss, dielectric loss, magnetic field and saturation magnetization. Another is to study the effect of propeller resonator on response characteristics. In this paper, the analysis and measurement of the response characteristics were carried out for the isolator prototype. The measurement results agreed on the simulation results and acquire insertion loss $0.18\;{\sim}\;0.24dB$, return loss 27dB, isolation 27dB and bandwidth 500MHz on this condition saturation magnetization 550G, dielectric loss 0.0004, magnetic loss 20 and dielectric constant 14.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.490-491
• /
• 2007

We have investigated dielectric dispersion and absorption in organic light-emitting diodes using 8-hydroxyquinoline aluminum($Alq_3$) as an electron transport and emissive material. We analyzed the dielectric dispersion and absorption of organic light emitting diodes using impedance characteristics measurement by the auto-balancing bridge technique of ITO/$Alq_3$/Al. Impedance characteristics was measured complex impedance Z and phase e in the frequency range of 40Hz to $10^8Hz$. We obtained dielectric constant and loss tangent (tan $\delta$) of the device. From these analyses, we are able to interpret a dielectric dispersion and dielectric absorption contributed by an interfacial and orientational polarization.

• 마이크로전자및패키징학회지
• /
• 제9권3호
• /
• pp.7-12
• /
• 2002

LTCC(Low temperature Cofiring Ceramics)기판의 고주파특성 평가에 있어서, 기판은 전극 패터닝 공정 방식이 결합된 하나의 시스템으로 평가되어야 한다. LTCC의 경우 시스템마다 상이한 소결 수축 과정, 전극과 기판의 접합 특성(matching) 차이, 사용 도체간 전기 전도도의 차이 등으로 인해 유전 특성 및 신호손실이 차이를 나타내었다. 본 논문에서는 FR-4, Duroid, Teflon등 기존의 상용 PCB(Printed Circuit Board) 와의 상대적인 비교를 통해 현재 사용되고 있는 LTCC 기판의 주파수 응용도를 확인하였으며, 20 ㎓까지 측정을 수행하였다. 측정방식으로는 Ring 공진기와 Series-Gap 공진기를 활용한 마이크로 스트립 공진기 방법을 채택하였으며, 실험 결과 기판손실 측정은 Ring 공진기 방식이 유효하였으며 유전률 측정은 Series-Gap 공진기 방식이 유효함을 확인하였다. 또한 주파수 증가에 따라 LTCC 기판의 전극 패터닝 방식이 시스템의 손실에 미치는 영향에 대해 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.33-36
• /
• 1999

In this paper, $Ba_{0.5}$Sr$_{0.5}$TiO$_3$ thin-films were prepared on Pt/Ti/Si0$_2$/Si substrates by RF magnetron sp-uttering method. We investigated electric and dielectric properties of BST thin-films with various ann-ealing temperature using in-sute RTA. Deposition conditions of BST films were set substrate temperat-ure, 30$0^{\circ}C$ and working gas ratio, Ar:O$_2$=90:10. After BST films deposited, we fabricated a capacitor of MIM structure with Al top electrode for measurement. Post-annealing using RTA performed at 40$0^{\circ}C$, $600^{\circ}C$, 80$0^{\circ}C$ for 60 sec, respectively. Also we exacted crystallization and composition of BST thin-films by XRD analysis. In measurement result, this capacitors showed a dielectric constant of about 200 at 1MHz and leakage current density of 5$\times$10$^{-8}$ A/$\textrm{cm}^2$ at 1.5V Microstructure of BST thin-films exhibited effective quality in low-temperature annealed 71ms than high-temperature annealed 71ms.s.s.

• 한국전기전자재료학회논문지
• /
• 제29권9호
• /
• pp.565-570
• /
• 2016

In this work, the complex permittivity of epoxy resins is measured. Epoxy resins, epoxy with micro size fillers and epoxy with micro+nano alumina composites have been evaluated for dielectric properties according to frequency variation. The dielectric spectroscopy measurement and analyses are carried out in the frequency range of $10^{-2}Hz$ to 1MHz and constant to room temperature. The results of dielectric loss suggest that significant improvement in the electrical performance can be expected by using samples containing nano and micro fillers mixture when compared to materials containing only microfillers. As the result, we verified the specific characteristics of dielectric permittivity and dielectric loss namely, relative permittivity become low with improving dispersibility of nano+micro mixture composites and become rise with agglomerate of nano particles.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1473-1476
• /
• 2019

PCB (Printed Circuit Board)를 설계할 때 정확한 재료 정보는 매우 중요하다. 전투함의 통합 마스트 (Integrated Mast)에서는 스텔스 기능을 위해 열 저감이 필수적이며 이를 위해서는 내부의 제어 장치에서 발생하는 열을 최대한 줄여야 한다. 제어 장치는 대부분 PCB로 이루어져 있으나 PCB의 유전상수 (Dk, Dielectric Constant)가 정확하게 알려져 있지 않아 임피던스 부정합이 발생하며 이는 열 발생을 매우 증가시킨다. 본 논문에서는 Dk의 측정 방법에 대해 살펴보고 동작 주파수에 따른 Dk 값의 변화가 임피던스 부정합에 미치는 영향을 살펴본다.

• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.25-32
• /
• 2009

A non-destructive testing (NDT) method for evaluating physical properties of concrete including the compressive strength is highly desirable. This paper presents such an NDT method based on measurement of electromagnetic (EM) properties of the material. Experiments are carried out on cement mortar with different water/cement (W/C) ratios. Their EM properties including the conductivity and the dielectric constant are measured at different exposure conditions and curing periods over a wide frequency range of the EM wave. The compressive strength of these specimens is also tested. It is found that both the conductivity and the dielectric constant increase as the W/C ratio decreases and the curing period increases, which lead strength development in the specimens. A linear correlation is observed between the averaged EM properties over the 5 to 20 GHz frequency range and the measured compressive strength, demonstrating the effectiveness of the EM property-based NDT method in evaluating strength of OPC mortar.