• Journal of Plant Biology
• /
• v.34 no.1
• /
• pp.53-57
• /
• 1991

The effect of polyamines and methylglyoxal bis(guanylhydrazone)(MGBG) on the activity of diamine oxidase was studied in soybean (Glycine max) seedlings. $10^{-2}\;M$ of putrescine, spennidine, and spermine inhibited diamine oxidase activity, whereas $10^{-6}\;M$ putrescine increased enzyme activity. These results suggest that diamine oxidase can be induced by a specific substrate, putrescine. The content of putrescine was increased in response to the increase in concentratioin of MGBG. In vitro, 40% of the diamine oxidase activity was inhibited by $10^{-3}\;M$ MGBG. In vivo, the diamine oxidase activity was increased by a low concentrration of MGBG. It was suggested that MGBG inhibited the formation of spermidine and that the accumulated putrescine induced diamine oxidase, whereas the diamine oxidase acitivity was inhibited by a high concentration of MGBG. It is suggested that a high cocentration of MGBG increases the putrescine content by inhibiting diamine oxidase activity which is responsible for putrescine degradation.dation.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.23-30
• /
• 1999

The relationships between morphological structures and residual stress behaviors of polyimide thin films depending on isomeric diamines were investigated. For this study, Poly(phenylene biphenyltetracarboximide) (BPDA-PDA) and poly(oxydiphenylene biphenyltetracarboximide) (BPDA-ODA) films were prepared from their isomeric diamines: 1,3-phenylene diamine (1,3-PDA) 1,4-phenylene diamine (1.4-PDA), 3,4'-oxydiphenylene diamine (3,4'-ODA), and 4,4'-oxydiphenylene diamine (4,4'-ODA), respectively. For those films, residual stresses were detected in-situ during thermal imidization of the isomeric polyimide as a function of processing temperature over the range of 25~$400^{\circ}C$ using. Thin Film Stress Analyzer (TFSA). In comparison, residual stress of BPDA-1.4PDA having better in-plain orientation and chain order was the lowest value of 7MPa whereas those of BPDA-1,3-PDA, BPDA-3,4'-ODA, and BPDA-4,4'-ODA were in the range of 40-50MPa. Conclusively, the effect of morphological nature (chain rigidity, chain order, orientation) and chain mobility relating to the g1ass transition behavior on the residual stress of isomeric polyimide thin films wart analyzed.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.302-308
• /
• 2013

This study is a preliminary investigation of the influence of surface characteristics of substrates on detergency of particulate soil. The surface of PET film was modified with NaOH and NaOH+ethylene diamine on different times. The surface morphology of the film was scanned by AFM and surface energies were calculated from measured contact angles between several solutions and film based on the geometric mean and a Lewis acid base method. The surface morphology of PET film treated with NaOH and NaOH+ethylene diamine became more etched, and the surface area, surface roughness and the coefficient of friction of film increased with treatment of NaOH and NaOH+ethylene diamine. The contact angle of film treated with NaOH and NaOH+ethylene diamine decreased in water and surfactant solution; in addition, the surface energy increased was largely attributed to the increased portion on the polar surface energy of film. However, the effect of the diamine addition to the NaOH treatment solution on surface characteristics of PET film was insignificant.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.437-444
• /
• 2003

Objective of this experiment was to investigate the role of strontium in intracellular processes in mung bean (Vigna radiata L.). Diamine oxidase (DAO) induction by $Sr^{2+}$ appeared to a decrease in putrescine levels correspondently. DAO activities in the hypocotyls were in a range of 0.5 to $1.8unit{\cdot}mg^{-1}\;protein{\cdot}min^{-1}$. The decrease in Put levels in the cotyledons might be partly resulted from Put degradation by DAO. It was observed that the accumulation of spermidine and spermine by $Sr^{2+}$ was in the range of 1 mM to 10 mM. Spermidine levels were 2 to 3 fold higher than in the absence of strontium. The increase in polyamine levels was observed not only on a basis of g fresh weight but also a RNA basis. These results demonstrated that the inhibitory action of $Sr^{2+}$ may be closely related with polyamine metabolism as well as diamine oxidation and polyamine accumulation.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.1
• /
• pp.1-10
• /
• 1996

We have prepared diamine-benzoquinone polymer which was known to excellent water proofing, high adhesion strength and good anti-corrosive effect, and have investigate with the possibility of application as a high performance resin for coatings. First of all, the reactivity of diamine-benzoquinone has been described an example of polymer reaction with research trend. The polymer reaction was divided into the polymerization with several diamine-benzoquinone and urethane group. The synthetic resin was shown a high solubility. In case of polymer containing urethane, water absorption content, water proofing and mechanical properties were controlled with the content, water proofing and mechanical properties were controlled with the content of quinone. It was shown that an use of choice was a possible result for various coatings. Diamine-quinone polymer can be used as a new resin for coatings. In addition, the polymer containing a functional group was shown a useful applicability as a high performance resin.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.10
• /
• pp.1099-1105
• /
• 1998

A series of (diamine)isopropylidenmalonatoplatinum(Ⅱ) complexes and the oxidation products, (diamine)Pt (OOC)2C=C(CH3)2(X)2, (diamine=ethylenediamine(en), 1,2-diaminopropan(dap), N-methylethylenediamine(men); X=OH, OCOCH3, OCOCF3), have been prepared, and their interaction with guanosine-5'-monophosphate (5'-GMP) have been examined by means of 1H NMR spectroscopy. The present platinum(Ⅱ) complexes have shown to interact with 5'-GMP through N7 coordination in two concecutive steps in a similar way as with cisplatin, but no interaction between the present platinum(Ⅳ) complexes and 5'-GMP was observed. However, in the presence of ascorbic acid, the platinum(Ⅳ) complexes have been found to interact with 5'-GMP with the reaction rate depending on their reduction rate.

• Journal of Adhesion and Interface
• /
• v.17 no.4
• /
• pp.136-140
• /
• 2016

In this study, a series of dimer acid-based polyamides with different diamines were synthesized by condensation polymerization and the polyamides were characterized by Fourier transform infrared spectroscopy (FT-IR). Effects of diamine structures on mechanical and thermal properties of polyamides were investigated. The tensile strength and lap shear adhesion strength of aromatic-based polyamide (DAP) were higher than those of aliphatic-based polyamide (DAH). In DSC thermogram, DAP has a high $T_g$ and $T_m$ compared with DAH. DAP's and DAH's softening point were $112-115^{\circ}C$ and $98-121^{\circ}C$, respectively.

• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.119-122
• /
• 1970

In those six kinds of diamine salt crystal of which their structures had already been determined up to date, commonly one molecule of diamine and two molecules of acid were combined; although the crystal of benzidine perchlorate, only one molecule each of benzidine and perchloric acid were combined. At the case of benzidine perchlorate, one molecule acts as the role of two molecules by coincidence of the center of symmetry point of both the lattice and molecule, and perchlorate ion is locating symmetrically between two -$NH_2$ groups of different benzidine molecule, therefore benzidine and acid could be combined together with 1:1 by mole ratio. When forming the salt with diamine and acid, the combining mole ratio would be determined in accordance with the relationship between the symmetry element that presented by the space group and the symmetry element of diamine salt melecule.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.6
• /
• pp.355-359
• /
• 1988

The Pfeiffer effect was examined on the systems of racemic [$Co^{II}(acac)_2$(diamine)] with d-cinchonine and l-cinchonidine as chiral environment substances in methanol, ethanol, chloroform and methanol-chloroform mixture solvents. It was found that the ${\Delta}$-enantiomer is enriched for the [$Co^{II}(acac)_2$(diamine)]-d-cinchonine system, but the Λ -enantiomer is enriched for the [$Co^{II}(acac)_2$(diamine)]-l-cinchonidine system. The complexes having no N-H protons such as [$Co^{II}(acac)_2$(bpy)] and [$Co^{II}(acac)_2$(phen)] were Pfeiffer-inactive in alcoholic solvents, where bpy = 2,2'-bipyridine and phen = 1,10-phenanthroline. This was interpreted to mean that the hydrogen bonding between N-H proton of diamine ligand and C-9 hydroxyl group of alkalid plays an important role in the chiral discrimination. And the rate of antiracemization ($k_{anti}$) by the Pfeiffer effect was also measured for the [$Co^{II}(acac)_2$(diamine)]-d-cinchonine system in alcoholic solvents. It was found that the rate of appearance of the Pfeiffer effect was enhanced as the concentration of added chloroform is increased.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.138-142
• /
• 1999

Imide-containing diamine and dicarboxylic acid monomers, N-(4-aminophenyl)-4-aminophthalimide(APAP), N-(4-carboxyphenyl)-4-carboxyphthalimide(CPCP), N,N'-oxydiphenylenebis(4-aminophthalimide)(ODPAP) and N,N'-oxydiphenylenebis(4-carboxyphthalimide)(ODPCP) were prepared. Poly(amide-imide)s were prepared by condensation reaction of the diamine and the dicarboxylic acid monomers. Poly(amide-imide)s were also prepared from the diamine monomers and aromatic acid chlorodes such as terephthaloyl chloride and isophthaloyl chloride. The polymers possess inherent viscosity of 0.18~0.67 dL/g and brittle films were cast from NMP/LiCl solution. The poly(amide-imide)s are easily soluble in NMP/LiCl and also partially soluble in polar aprotic solvents such as DMF, DMSO, NMP and DMAc even at $80^{\circ}C$. DSC traces of polymers showed no glass transition temperature and melting temperature, and TGA traces showed a 10% weight loss at $500^{\circ}C$.