• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.628-632
• /
• 2001

Experimental approach was investigated to improve gear rattle noise of a small car. During the development of a small car serious problem occurred inside the transmission gear units. The transmission was a carried over system from a less powered predecessor. Several components of suspicion were investigated, and applied to reduce rattle noise. In general, backlash, the assembly gaps, and the clutch disk rattle induce gear rattle noise. Above mentioned improvements were applied to reduce the noise, but still problem remained. Meanwhile, the temperature inside the gearbox was reported to be unusually high and the life of transmission oil quality deteriorated drastically, Temperature increment caused the large gap between the bearing outer diameter and the transmission housing. Large gap made the gear shaft assembly move intermittently and impact each other. The tighter control of the assembly gap allowed the rotating shafts smoothly and reduced the gear rattle noise even in the high temperature range.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.382-393
• /
• 2016

Flow over a bluff body is an attractive research field in thermal engineering. In the present study, laminar flow over a confined heated square cylinder using CuO-Water nanofluid is considered. Unsteady two-dimensional Navier-Stokes and energy equations are solved numerically using finite volume method (FVM). Recent correlations for the thermal conductivity and viscosity of nanofluids, which are function of nanoparticle volume fraction, temperature and nanoparticle diameter, have been employed. The results of numerical solution are obtained for Richardson number, nanoparticle volume fractions and nanoparticle diameters ranges of 0-1, 1-5% and 30-100 nm respectively for a fixed Reynolds number of Re = 150. At a given volume concentration, the investigations reveal that the decreasing in size of nanoparticles produces an increase in heat transfer rates from the square cylinder and a decrease in amplitude of the lift coefficient. Also, the increment of Nusselt number is more pronounced at higher concentrations and higher Richardson numbers.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.444-445
• /
• 2006

Flying trajectories of fine particles within a size range of $10{\sim}60{\mu}m$ were studied during centrifugal atomizing processes. A FORTRAN program was written by using increment method. Calculation results revealed that the drag force might reach very high value of 522-7800 g for fine powder of $10{\sim}60{\mu}m$. Flying distance in horizontal direction could be shortened if the particles fly obliquely due to the huge drug force. On the other hand, very fine powder could be projected to far distances when the atmosphere flow velocity is much stronger. Fortunately such particles could be contracted within a cylinder closed to the atomizer when the atmosphere flow was weaken or retained in a limited diameter.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.42-52
• /
• 2006

Tube erosion can be defined as a phenomenon for an increment of bore diameter, a declination of accuracy and utility of tube by firing. This study introduces the characteristics of tube life for the 155 mm K9 SHP Using a tube history book with bore measurement data and firing data of standard charge, this study analyzed the EFC vs Tube life and EFC with heat transfer effect formula as a consideration of continuous firing vs tube life. The results were compared with Firing Table(FT 155-K9-1) after the analysis. Also, this study suggests that CN98 tube can be rifled as 1000 EFC through the severe condition with continuous firing.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.9-13
• /
• 2013

Shielding effects in conductive and magnetic materials were investigated as a function of properties, thickness and diameter. In this work, evaluations on passive conductive and magnetic shield specimens were achieved through experimentation set-up using 50 Hz single and three phase induction field sources. Analysis on material microstructure properties and characteristics of shielding specimens were performed with the use of vibrating sample magnetometer (VSM) and field emission scanning electron microscopy (FESEM). An induction field at $136{\mu}T$ of single phase system and $50{\mu}T$ of three phase systems were observed to the shield specimens with the thickness ranged of 0.2 mm to 0.4 mm. It is observed that shield specimen efficiency becomes inversely proportionate to the increment of induction fields. The decrease was attributed to the surface structure texture which relates to the crystallization and non-crystallization geometrical effects.

• 한국자원식물학회지
• /
• 제20권1호
• /
• pp.86-88
• /
• 2007

바위취의 토양산도별 생육특성을 보면 초장, 엽수, 엽장, 엽폭 그리고 초폭에 있어서 모두 pH 4.5에서 생육량이 많았으며 pH가 높을수록 생육량이 현저하게 떨어지는 경향으로 통계적인 유의성이 인정되었다. 따라서 바위취 분화생산시 경량 배양토의 토양산도를 $pH4.5{\sim}5.0$ 정도로 맞추어 주는 것이 pH 6.0보다 초기 활착이 빠르고 생육이 양호하며 균일성이 높아지는 것으로 나타났다.

• 한국산림과학회지
• /
• 제73권1호
• /
• pp.43-54
• /
• 1986

파종상(播種床)에서 피음처리(被陰處理)를 행(行)한 잣나무 유묘(幼苗)의 상대광도별(相對光度別) 생장관계(生長關係)를 분석(分析)하였던 바 기(其) 결과(結果)를 요약(要約)하면 다음과 같다; 1) 신장생장(伸長生長)에 있어서 지상부(地上部)는 상대광도(相對光度) 37% 구(區)에서, 그리고 기외(其外)의 기관(器官)은 100% 구(區)에서 가장 크게 나타났다. 광도(光度)가 지상부(地上部) 및 지하부(地下部), 묘장(苗長), 직경생장(直徑生長)에 미치는 영향(影響)은 기여율(寄與率) 93%, 26.2%, 21.4%. 48.7%였다. 2) 엽령(葉令)에 따라 엽속(葉束) 및 엽장(葉長)의 변화(變化)는 크게 나타났다. 엽속(葉束)은 1년생(年生)의 경우 광도(光度)가 높을수록, 그리고 2년생(年生)은 상대광도(相對光度) 37% 구(區)에서 가장 많았다. 그리고 엽장(葉長)은 각(各) 처리간(處理間)에 큰 차(差)가 없었다. 이때 광도(光度)가 미치는 엽속(葉束) 및 엽령(葉令)에 대(對)한 기여율(寄與率)은 각각(各各) 39%, 27.8% 였고 엽장(葉長)은 2.5%였다. 3) 중량생장(重量生長)은 상대광도(相對光度) 100% 구(區)에서 가장 컸으나 점차 광도(光度)가 낮아짐에 따라 감소(減少)하는 경향(傾向)이었다. 광도(光度)가 미치는 기여율(寄與率)은 생중량(生重量) 및 건중량(乾重量)의 경우 38%와 7.6%였고, 엽건중량(葉乾重量)은 13.18%로 나타났다. 4) T/R 율(率)은 상대광도(相對光度)가 점차 낮아 질수록 증가(增加)하는 경향(傾向)이었다. 이때 광도(光度)가 T/R율(率)에 미치는 기여율(寄與率)은 7.0%였다. 5) 엽건중량(葉乾重量)과 타기관(他器官)의 생장량간(生長量間)에는 정(正)의 상관(相關)을 인정(認定)할 수 있었고 이들간에는 직선회귀(直線回歸) 관계(關係)에 있음도 알 수 있었다.

• 한국산림과학회지
• /
• 제101권4호
• /
• pp.722-728
• /
• 2012

기후변화는 생태계 구조와 기능에 영향을 미치고, 특히 기온 상승은 광합성과 생장기간을 변화시켜 식물의 생장에 영향을 줄 것으로 예상된다. 본 연구는 실외 실험적 온난화가 굴참나무(Quercus variabilis) 묘목의 생장에 미치는 영향을 알아보고자, 1-0 묘목을 2010년 4월에 식재하고, 2010년 11월부터 적외선등을 이용하여 온난화 처리구의 기온을 대조구보다 $3^{\circ}C$ 증가시켰다. 2011년 3월과 2012년 6월에 묘고와 근원경을 각각 측정하였고, 2011년과 2012년 3월에 지상부 및 지하부 생물량을 각각 조사하였다. 묘고 및 근원경은 온난화 처리구에서 대조구보다 높았으며, 2011년 3월 근원경을 제외하고 차이는 모두 통계적으로 유의하였다. 굴참나무 묘목의 생장량(mm)은 온난화 처리구 (묘고: $529{\pm}30$, 근원경: $5.6{\pm}0.5$)에서 대조구(묘고: $464{\pm}28$, 근원경: $4.5{\pm}0.4$)보다 높았으며, 근원경 생장량에서만 통계적으로 유의한 차이가 나타났다. 생물량 증가량(g/year)의 경우도 온난화 처리구(총 생물량: $36.88{\pm}6.52$, 지상부: $11.91{\pm}3.44$, 지하부: $24.97{\pm}3.73$)에서 대조구(총 생물량: $30.59{\pm}5.51$, 지상부: $8.73{\pm}1.66$, 지하부: $21.86{\pm}3.88$)보다 높았으나, 온난화 처리구와 대조구간 통계적으로 유의한 차이를 보이지 않았다. 온난화 처리에 따른 굴참나무 묘목의 생장 및 생물량 증가 경향은 생장기간과 봄철 순광합성률 증가와 관련이 있을 것으로 추정된다.

• 한국산림과학회지
• /
• 제79권1호
• /
• pp.1-15
• /
• 1990

본 연구에서는 수간석해의 분석시간과 경비를 줄이고 정확도를 높히기 위하여 P.C용 수간석해 프로그램을 제작하였으며, 본 프로그램에 이용된 수간석해 방법과 기존방법을 비교하여 다음과 같은 결과를 얻었다. 연륜측정기로 부터 1/100mm단위로 연륜 1개씩 측정된 data가 컴퓨터에 자동입력되도록 Turbo pascal을 이용하여 프로그램 하였다. 또한 각 단판의 직경이 단면적 평균법에 의해 계산되며, Spline function에 의해 재적 및 수고가 계산되도록 Fortran 77을 이용하여 수간석해 계산프로그램을 제작하였다. 이와같이 계산된 각종 생장량은 1년, 5년 단위로 각각 출력되며 수간석해도 및 각종 생장량도가 personal computer용 dot printer로 출력가능하여 수간 석해의 결과를 보다 쉽게 이용할 수 있게 되었다. 본 프로그램에서 이용된 수간석해 계산방법과 기존방법을 비교한 결과 단면적평균법이 편심에 의한 오차를 줄일 수 있었고, 수고 및 재적계산에서 Spline함수에 의한 간곡선 추정을 이용할 경우에는 다른 함수식에 의한 생장량 계산값보다 더욱 정확히 계산 가능하였다.

• 한국환경복원기술학회지
• /
• 제6권6호
• /
• pp.49-55
• /
• 2003

Total phosphorous removal rate was examined of a subsurface-flow treatment wetland system which was constructed on floodplain in the down reach of the Kwangju Stream in Korea from May to June 2001. Its dimensions were 29 meter in length, 9 meter in width and 0.65 meter in depth. A bottom layer of 45 cm in depth was filled with crushed granite with about 15~30 mm in diameter and a middle layer of 10 cm in depth had pea pebbles with about 10 mm in diameter. An upper layer of 5 cm in depth contained course sand. Reeds(Phragmites australis) were transplanted on the surface of the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju Stream flowed from a submerged dam into it via a pipe by gravity flow and treated effluent was funneled back into the Stream. The number of reed stems increased from 80 stems/$m^2$ in July 2001 to 136 stems/$m^2$ in September 2001. The hight of stems was 44.2 cm in July 2001 and 75.3 cm in September 2001. The establishment of reeds at early operating stage of the system was good. Volume and water quality of inflow and outflow were investigated from July 2001 through December 2001. The average inflow was 40 $m^3$/day and hydraulic detention time was about 1.5 days. The concentration of total phosphorous n influent and effluent was 0.83 and 0.33 mg/L, respectively. The removal rate of total phosphorous averaged about 60%. The removal efficiency was slightly higher, compared with that of subsurface-flow wetlands operating in North America, whose retention rate of total phosphorous was reported to be about 56%. The good abatement rate could be attributed to sedimentation of particle phosphorous in pores of the media and adsorption of phosphorous to the biofilm developed on the surface of them. Increase of standing density of reeds within a few years will develop root zones which may lead to increment in the phosphorous retention rate.