• 제목/요약/키워드: diameter increment

검색결과 170건 처리시간 0.021초

경량식혈기를 이용한 용기묘 식재의 작업공정 및 초기생장 분석 (An Analysis on the Operation Productivity and Initial Growth of Containerized Seedlings Planted by the Lightweight Planting Auger)

  • 고치웅;김동현;이관희;김진현;김동근
    • 한국환경복원기술학회지
    • /
    • 제19권6호
    • /
    • pp.77-86
    • /
    • 2016
  • Due to aging of the rural and mountain populations the labor force is reduced. However work intensity continues to increase, thus, there is a need to improve the current effectiveness of forest operations. This study compared and analyzed the Operation productivity and efficiency of planting containerized seedlings using a battery-powered planting auger and a mattock. Growth was also investigated by looking into the initial growth increments in the planted seedlings. Tasks were investigated by analyzing the process and operation time needed to plant 1 containerized seedling using a planting auger and a mattock. The time spent on the various elements of the planting process was measured with a stopwatch but observations were done continuously. Result of the study shows that with the use of a lightweight planting auger the average time spent to plant a containerized seedling is 18.61 seconds while with the use of a mattock it took an average of 26.96 seconds which clearly demonstrates that the planting auger is more efficient in terms of working hours. Working intensity was also analyzed with the use of a portable heart rate monitor (Polar V800). The average increase in heart rate and work intensity index were analyzed for one planting cycle. It was observed that when using the lightweight planting auger, there was a 46.51% increase in the average heart rate while a 74.67% increase in heart rate when the mattock was used which shows that there is a significant increase in heart rate when mattock is used. In addition, work intensity index was observed to be 29.95% and 47.83% when the planting auger and mattock were used respectively. With the continuous use, work intensity index is significantly higher with the use of the mattock as compared to that of the lightweight planting auger. There were no significant differences on the growth increment of seedlings planted using the different tools until a year after planting, however differences in growth increment were observed after a year. A difference of 15.1 cm in height and 3.41 mm in diameter was observed which shows that the use of lightweight planting auger is excellent for planting containerized seedlings.

大氣汚染地域 適應 樹種 選拔에 關한 硏究 (A Study on the Selection of Adaptable Tree in Air Pollution Area)

  • 朴晥澈
    • 한국대기환경학회지
    • /
    • 제7권1호
    • /
    • pp.55-65
    • /
    • 1991
  • The study was performed to select a adaptable tree species under stressed field conditions where there are a industrial plants operating with a number of smoke stacks emitting pollutants, such as hydrogen fluoride and sulfur dioxide. As a result of the study, a tree species selected are due to construct a forest belt in a zones near industrial plants to reduce the concentrations of air pollutants. The concentrations of atmospheric hydrogen fluoride and sulfur dioxide were very higher at experimental sites near industrial plants (air-pollution sites) than at control site. The leaves of 7 tree species grown at air pollution sites contained more sulfur and, specially, fluorine than at those control site. Among the tested tree species, Ligustrum japonicum Thunb. and Euonymus japonica Thunb. grown at air pollution sites did not at all break out a foliar injury but appeared to be healthy, as well as those grown at control site. Acer pseudo-sieboldianum Kom., Pinus virginiana Mill., Larix leptolepis Gordon., Pinus koraiensis Sieb. et Zucc., Pinus strobus L., Picea abies Karst and Ligustrum obtusifolium Sieb. et Zucc., however, showed a severe fluoride-type foliar injury such as necrosis on tip or margin of leaves, etc. Fluorine found in leaves was proved to be correlated to sulfur found in leaves whereas index of foliar injury hadn't a good correlation to pollutants found in leaves. It appears that Euonymus japonica Thunb., Ligustrum japonica Thunb., Platanus acerifolia Willd, Chamaecyparis pisifera Endl., Populus tomentiglandulosa T. Lee and Sophora japonica L. grown at both experimental sites had a high value of percent survival whereas Pinus virginiana Mill., Pinus koraiensis Sib. et Zucc., Koelreuteria paniculata Laxm. and Alnus hirsuta Rupr. had an extremely low value of that. In comparison with control site, the percent tree height increments in Chamaecyparis pisifera Endl., Ligustrum japonicum Thunb., Quercus acutissima Carruth., Populus tomentiglandulosa T. Lee, Pinus thunbergii Parl and Euonymus japonica Thunb. and the percent upmost root diameters in Populus tomentiglandulosa T. Lee, Chamaecyparis pisifera Endl., Euonymus japonica Thunb., Ligustrum japonicum Thunb., Betula platyphylla var. japonica Hara and Pinus thunbergii Parl. cultivated at air polluted sites showed very high value above 90%, respectively. A significant negative correlation (r=-0.662) was recognized between the index of foliage injury and the percent collective character, which was the mean of tree characters such as percent survival, percent tree height increment and percent upmost root diameter increment which compared to those at air polluted site with those at control site. Based on the percent collective character Ligustrum japonicum Thunb., Euonymus japonica Thunb., Chamaecyparis pisifera Endl., Populus tomentiglandlosa T. Lee, Betula platyphyla var. japonica Hara and Platanus occidentalis L. have large value about 90%, respectively. Therefore, the results indicate that this tree species are adaptable species in air polluted regions. For better understanding of the adaptable tree species, furthur studies concerning the effects of various air pollutants on the tree growth are required.

  • PDF

Windows용 수간석해(樹幹析解) 프로그램(Stemwin1.0)의 개발(開發) (Development of Stem Analysis Program(Stemwin1.0) for Windows)

  • 이준학;이우균;서정호
    • 한국산림과학회지
    • /
    • 제90권3호
    • /
    • pp.331-337
    • /
    • 2001
  • 본 연구에서는 PC기반의 Windows운영체제에서 운용될 수 있는 수간석해 프로그램(Stemwin1.0)을 개발하였다. Stemwin1.0에서는 연륜측정기에서 1/100mm 단위로 측정된 l년 단위의 연륜폭 자료를 입력받아 흉고직경 및 단면적, 수고, 재적 등 각종 생장량을 다양한 방법으로 계산할 수 있다. 즉, 수령별 평균 흉고직경 및 단면적은 산술 및 단면적 평균법을 적용해 계산할 수 있으며, 수고생장은 평행선법, 직선연장법, 수고곡선법 등에 의해 다양하게 추정할 수 있다. 재적은 Huber식, Smalian식, Spline식 등을 선택적으로 적용해 추정할 수 있다. 선택된 계산방법에 따라 상가 각 생장인자의 총, 평균 및 연년 생장량 뿐만 아니라 이용재적 및 수고, 형수, 생장률 이용률 등의 생장 관련 정보가 1년 단위로 자동 계산된다. 또한, 1년 단위의 정밀한 간곡선도를 다양한 축척으로 출력할 수 있으며 간곡선식 유도를 위한 통계분석용 자료(단판 높이별 직경)도 제시된다. Stemwin1.0에서는 계산결과를 MS-Excel로 전환할 수 있도록 하여 사용자가 손쉽게 활용할 수 있도록 하였다.

  • PDF

율무에 대한 질소시비가 생육 및 수량에 미치는 영향 (Effects of Nitrogen Fertilization on Growth Characteristics and Grain Yield of Job's Tears)

  • 강치훈;육완방;김두환;윤장근
    • 한국토양비료학회지
    • /
    • 제33권5호
    • /
    • pp.340-346
    • /
    • 2000
  • 본 실험은 질소 시비 수준 0, 80, 160, $240kg\;ha^{-1}$에 따른 율무 1호 품종의 생육 특성, 조곡 수량, 질소축적 및 수확 후 토양의 화학성분 변화를 조사하였다. 질소시비 수준이 증가될수록 출수, 개화기는 단축되었으나 개화기부터 수확기까지 소요되는 기간은 증가되어 파종에서 수확기까지 소요되는 기간은 0-5 일 증가되었다. 질소시비 수준이 증가할수록 간장, 주분얼경의 수, 착립부위고는 유의한 증가를 보였다 (P<0.05). 주간절수, 주간직경, 착립부위장은 유의한 차이가 없었다. 주간의 소수지경수, 주간의 착립절간은 유의한 증가가 있었으나 $80kg\;ha^{-1}$ 이상에서는 큰 차이가 없었다 (P<0.05) 조명나방 피해는 질소 $240kg\;ha^{-1}$ 처리구에서 30%로 높아 수량감소의 요인으로 작용하였다. 수량구성요소는 질소시비량과 비례하여 양호해지는 경향이었으나 주당립수는 질소시비량 $160kg\;ha^{-1}$ 구에서 가장 많아 조곡 수량이 $3,410kg\;ha^{-1}$로 최고 질소 시비수준인 $240kg\;ha^{-1}$구에 비해 $140kg\;ha^{-1}$ 많았다. 질소사용효율은 질소시비량이 증가할수록 감소하였다. 실험후 토양중 총 질소함량은 실험전에 비해 질소 0, $80kg\;ha^{-1}$ 구에서는 낮았으며 질소 160, $240kg\;ha^{-1}$ 구에서는 높았다.

  • PDF

공기연소 분위기와 순산소 연소 분위기에서 입자 크기와 습도가 $CaCO_3$ 흡착제 입자의 반응특성에 미치는 영향 분석 (Analysis of the Effect of Particle Size and Humidity on Reaction Characteristics of $CaCO_3$ Sorbent Particle under Air and $O_2/CO_2$ Atmospheric Conditions)

  • 정성하;이강수;길상인;윤진한;김상수
    • 한국입자에어로졸학회지
    • /
    • 제10권2호
    • /
    • pp.75-82
    • /
    • 2014
  • It is necessary to find out the reaction characteristics of $CaCO_3$ sorbent particles in air and $O_2/CO_2$ atmospheric conditions in order that an in-furnace desulfurization technique can be applied to oxy-fuel combustion system. In this study, rate of change of GMD(geometric mean diameter) and specific surface area of $CaCO_3$ sorbent particles reacted in DTF(drop tube furnace) experimental setup were analyzed to investigate the effect of particle size and humidity on the reaction characteristics of them. In air atmospheric condition, calcination process occurs actively within shorter residence times as the particle size increases. On the contrary, in $O_2/CO_2$ atmospheric condition, a calcination process is delayed as particle size increases. The increment of humidity accelerates calcination process in an air atmospheric condition and increase rate of calcination in an $O_2/CO_2$ atmospheric condition.

개단 고강도 콘크리트(PHC) 말뚝의 실용성 검토 (Investigation for Possible Practical Applicability of Open-Ended PHC Pile)

  • 백규호;이승래;박현일
    • 대한토목학회논문집
    • /
    • 제14권4호
    • /
    • pp.965-975
    • /
    • 1994
  • PHC말뚝의 선단부를 개방시켜서 사용하면 관입저항력의 감소로 인하여 관입깊이가 증가되며, 결과적으로 지지력의 증가를 가져온다. 그러나 개단 PHC말뚝의 사용을 위해서는 다음의 두가지 문제가 해결되어야 한다. 첫째는 말뚝의 선단부를 개방시킴에 따른 지지력의 변화이며, 둘째는 말뚝 내부로 유입되는 관내토에 의한 말뚝 선단부의 파괴여부이다. 따라서 본 연구에서는 개단 PHC말뚝의 실용성을 검토하기 위하여 먼저 말뚝의 선단부 형상에 따른 지지력 비교를 목적으로 두개의 폐단말뚝과 두 개의 개단말뚝을 이용하여 토조에서 모형말뚝실험을 수행하였다. 실험결과로부터 말뚝의 선단부 형상에 따른 관입저항력과 지지력의 변화 및 PHC말뚝 선단부의 파괴여부가 검토되었다. 실험결과 동일한 관입깊이에서 개단말뚝의 전체지지력은 관입깊이가 증가함에 따라 폐단말뚝의 전체지지력과 비슷해지며, PHC 말뚝의 경우 말뚝선단부로부터 말뚝내경의 0.8~1.1배되는 영역에서 균열발생의 가능성이 제시되었다.

  • PDF

Simulation of the tensile failure behaviour of transversally bedding layers using PFC2D

  • Haeri, Hadi;Sarfarazi, Vahab;Zhu, Zheming;Marji, Mohammad Fatehi
    • Structural Engineering and Mechanics
    • /
    • 제67권5호
    • /
    • pp.493-504
    • /
    • 2018
  • In this paper, the tensile failure behaviour of transversally bedding layers was numerically simulated by using particle flow code in two dimensions. Firstly, numerical model was calibrated by uniaxial, Brazilian and triaxial experimental results to ensure the conformity of the simulated numerical model's response. Secondly, 21 circular models with diameter of 54 mm were built. Each model contains two transversely bedding layers. The first bedding layer has low mechanical properties, less than mechanical properties of intact material, and second bedding layer has high mechanical properties, more than mechanical properties of intact material. The angle of first bedding layer, with weak mechanical properties, related to loading direction was $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$ while the angle of second layer, with high mechanical properties, related to loading direction was $90^{\circ}$, $105^{\circ}$, $120^{\circ}$, $135^{\circ}$, $150^{\circ}$, $160^{\circ}$ and $180^{\circ}$. Is to be note that the angle between bedding layer was $90^{\circ}$ in all bedding configurations. Also, three different pairs of the thickness was chosen in models; i.e., 5 mm/10 mm, 10 mm/10 mm and 20 mm/10 mm. The result shows that In all configurations, shear cracks develop between the weaker bedding layers. Shear cracks angel related to normal load change from $0^{\circ}$ to $90^{\circ}$ with increment of $15^{\circ}$. Numbers of shear cracks are constant by increasing the bedding thickness. It's to be note that in some configuration, tensile cracks develop through the intact area of material model. There is not any failure in direction of bedding plane interface with higher strength.

배관의 결빙에 의한 열변형 및 열응력 해석 (Thermal deformation and thermal stress analysis of pipe during pipe internal fluid freezing)

  • 박영돈;변상규;강범수
    • 대한기계학회논문집A
    • /
    • 제22권1호
    • /
    • pp.227-237
    • /
    • 1998
  • In case the systems have radioactivity, toxic liquid or expensive fluid, and have to be performed repair work at one point of the system pipe, the formation of an internal ice plug by the removal of heat from the pipe is often consideredas a useful method. In this procedure, an annular jacket is placed around the pipe, and the jacket is then filled with liquid Nitrogen(-196.deg. C). Thermal analysis by the finite element method based on the laboratory experiments has been constructed. The result of the finite element analysis on the experimental model shows to be reasonable, and thus the finite element analysis for different pipe size, material and thickness has been performed to see if the ice plugging procedure in various applications can be safely performed without possibility of damage to the pipe. It has been confirmed that in carbon steel pipes the maximum stress is found around the boundary of the freezing jacket, and the stress increases as pipe thickness increases, but the maximum stress shows no consistency along the increment of the pipe diameter. The maximum stresses appear lower than yield stress in carbon steel. It has been also shown that in stainless steel pipes the maximum stresses are also found around the boundary of the freezing jacket, but almost the same value in spite of different pipe size an thickness, and the maximum stresses show slightly higher than the yield stress of the stainless steel.

임피던스 측정법을 이용한 포틀랜드 시멘트 -고로 슬래그계의 초기수화 (Early Hydration of Portland Cement-Blast furnace Slag System by Impedance Techniques)

  • 송종택;김훈상;황인수
    • 한국세라믹학회지
    • /
    • 제39권1호
    • /
    • pp.99-107
    • /
    • 2002
  • 임피던스 측정법은 시멘트 페이스트의 수화 진행 시 미세구조의 연속적인 변화를 분석하는데 유용한 수단으로 이용되어 왔다. 본 실험에서는 고로슬래그의 첨가량과 분말도를 달리하여 보통 포틀랜드 시멘트에 첨가한 후 나타나는 페이스트의 초기 수화거동을 임피던스 측정법을 이용하여 관찰하였다. 고로 슬래그가 시멘트에 치환 첨가되면, 수화 초기에는 $R_{t (s+1)}$(고상과 액상에 의한 저항)과 $R_{t(int)}$의 증가폭이 감소하였다. 이것은 고로 슬래그를 포함한 시멘트의 수화가 초기재령에서는 늦게 진행되고 있음을 보여준다. 고로 슬래그의 첨가량이 증가할 수록 $R_{t(s+1)}$이 감소하였으며, 수화 72시간에 출현하는 반원의 직경, $R_{t(int)}$ 역시 고로 슬래그의 첨가량이 증가할 수록 감소하고 있다. 그러나, 첨가된 고로 슬래그의 분말도가 클수록 수화 초기부터 $R_{t(s+1)}$$R_{t(int)}$의 수치가 증가하였다.

진동대 실험을 이용한 개착식터널의 동적 거동특성에 관한 연구 (A Study on the Dynamic Behaviour of Cut-and-Cover Tunnel by Shaking Table Test)

  • 정형식;조병완;이영남;이두화;이용준
    • 한국지반공학회논문집
    • /
    • 제17권6호
    • /
    • pp.173-180
    • /
    • 2001
  • 지진동으로 인한 개착식터널의 동적 거동특성을 파악하기 위해 Prototype터널 폭이 약 14.2m, 높이가 약 8.5m를 1/40sca1e로 축소제작한 모형체의 진동대 실험을 수행하였으며 본 실험에서는 터널의 토피고 및 원지반의 경사각에 따른 영향을 분석하였으며 이를 동적수치해석결과와 비교 분석하였다. 진동대 실험결과 터널의 토피고가 증가할수록 터널에 발생되는 응력 및 가속도는 감소하는 것으로 나타났으며 이는 터널의 설치심도가 증가할수록 주변지반의 구속효과가 증가하기 때문인 것으로 판단된다. 또한 원지반의 경사가 완만할수록 터널에 발생되는 응답치는 증가하는 경향을 보이고 있는데 이는 지진동으로 인한 주변지반의 구속효과가 원지반의 영향 보다는 되메움토사의 영향을 지배적으로 받기 때문인 것으로 판단된다. 또한 진동대실험결과 및 상시조건의 구조해석결과와 비교하면 터널의 토피고가 터널직경의 1배(1D)이상 확보되는 조건일 경우, 지진동이 터널에 미치는 영향이 적은 것으로 나타났다.

  • PDF