• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.13-21
• /
• 2019

The content based on image retrieval makes use of features of information within image such as color, texture and share for Retrieval data. we present a novel approach for improving retrieval accuracy based on DCT Filter-Bank. First, we perform DCT on a given image, and generate a Filter-Bank using the DCT coefficients for each color channel. In this step, DC and the limited number of AC coefficients are used. Next, a feature vector is obtained from the histogram of the quantized DC coefficients. Then, AC coefficients in the Filter-Bank are separated into three main groups indicating horizontal, vertical, and diagonal edge directions, respectively, according to their spatial-frequency properties. Each directional group creates its histogram after employing Otsu binarization technique. Finally, we project each histogram on the horizontal and vertical axes, and generate a feature vector for each group. The computed DC and AC feature vectors bins are concatenated, and it is used in the similarity checking procedure. We experimented using 1,000 databases, and as a result, this approach outperformed the old retrieval method which used color information.

• Architectural research
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2023

Structural ageing influences the structural performance in a negative way by reducing the seismic resilience of the structure which makes it a major concern around the world. Retrofitting is considered to be a pragmatic and feasible solution to address this issue. Numerous retrofitting techniques are devised by researchers over the years. The viability of using steel bracings as retrofitting component is evaluated on a G+30 storied building model designed according to ACI318-14 and ASCE 7-16. Four different types of steel bracing arrangements (V, Inverted V/ Chevron, Cross/ X, Diagonal) are assessed in the model developed in commercial nu-merical analysis software while considering both material and geometric nonlinearities. Reducing displacement and cost in the structures indicates that the design is safe and economical. Therefore, the purpose of this article is to find the best bracing system that causes minimum displacement, which indicates maximum lateral stiffness. To evaluate the seismic vulnerability of each system, incremental dynamic analysis was conducted to develop fragility curves, followed by the formation of collapse margin ratio (CMR) as stipulated in FEMA P695 and finally, a cost estimation was made for each system. The outcomes revealed that the effects of ge-ometric nonlinearity tend to evoke hazardous consequences if not considered in the structural design. Probabilistic seismic and economic probes indicated the superior performance of V braced frame system and its competency to be a germane technique for retrofitting.

• Journal of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.19-34
• /
• 1976

The crystal structure of sodium sulfisoxazole hexahydrate, $C_{11}H_{12}N_3O_3SNa{\cdot}6H_2O$,has been determined by X-ray diffraction method. The compound crystallizes in the monoclinic space group $$P2_1}c$$ with a = 15.68(3), b = 7.70(2), c = 17.94(4)${\AA}$, ${\beta}$ = $118(2)^{\circ}$ and Z = 4. A total of 1717 observed reflections were collected by the Weissenberg method with $CuK{\alpha}$ radiation. Structure was solved by heavy atom method and refined by block-diagonal least-squares methods to the R value of 0.14. The conformational angle formed by the S-C(l) bond with that of N(2)-C(7), when the projection in taken along the S-N(2), is $73^{\circ}.$ The benzene ring is planar and makes an angle of $60^{\circ}$ with the plane of the isoxazole ring, which is also planar. The sodium atom has a distorted octahedral coordination of N(l) and five oxygen atoms from hydrate molecules. Sodium sulfisoxazole hexahydrate shows fourteen different hydrogen bondings in the crystal. These are six $O-H{\cdots}O-H bonds, three $O-H{\cdots}O$ bonds, two $O-N{\cdots}N,$ one $N-H{\cdots}O,O-H{\cdots}N,N-H{\cdots}O-H$ bond, with the distances in the range of 2.71 to $3.04{\AA}.$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.440-447
• /
• 2020

Masonry structures are used as bearing walls in small buildings, but they are generally considered non-bearing walls. They are used as partition walls that divide the interior spaces of the frame structures of buildings. In addition, wetting techniques that use mortar as an adhesive between blocks or bricks in construction are vulnerable to climatic conditions, especially cracks in mortar, which can cause conduction collapse of the walls in seismic loading. The purpose of this research was to propose a dry concrete block construction method that complements the weak axial shear stiffness and improves the weakness of the wet construction method as well as to investigate its structural behavior. In this study, the material properties of concrete blocks were examined, and the seismic performance of the proposed dry assembly structure was verified by structural behavior tests on horizontal cyclic loads. First, in these study results, concrete blocks can be applied to the dry block construction method instead of wet construction methods because they secure more than C-type blocks in KS regulations. Second, the structural performance of the wall against a horizontal cyclic load indicates that the resisting force of the assembly block wall is increased by increasing the horizontal length of the wall, forming several diagonal cracks. Finally, the proposed dry block wall structure requires a seismic performance assessment considering that the ratio of the shape of the wall by height and length is considered a major influence variable on the structural behavior under a horizontal load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.634-639
• /
• 2020

In general, the stability and response characteristics of the system can be improved by changing the pole position because a nonlinear system can be linearized by the product of a 1st and 2nd order system. Therefore, a controller that moves the pole can be designed in various ways. Among the other methods, LQ control ensures the stability of the system. On the other hand, it is difficult to specify the location of the pole arbitrarily because the desired response characteristic is obtained by selecting the weighting matrix by trial and error. This paper evaluated a method of selecting a weighting matrix of LQ control that moves multiple double poles with Jordan blocks to real poles. The relational equation between the double poles and weighting matrices were derived from the characteristic equation of the Hamiltonian system with a diagonal control weighting matrix and a state weighting matrix represented by two variables (ρ_d, ϕ_d). The Moving-Range was obtained under the condition that the state-weighting matrix becomes a positive semi-definite matrix. This paper proposes a method of selecting poles in this range and calculating the weighting matrices by the relational equation. Numerical examples are presented to show the usefulness of the proposed method.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.415-428
• /
• 2004

The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.325-337
• /
• 2020

Versatile Video Coding (VVC) is a new video coding standard that is being developed by the Joint Video Experts Team of ISO/IEC/ITU-T and it has adopted various technologies including screen content coding tools. Screen contents have a feature that blocks are likely to have diagonal edges like character regions. If triangular partitioning coding is allowed for screen contents having such the feature, coding efficiency would increase. This paper proposes a intra prediction method using triangular partitioning prediction for screen content coding. Similar to the Triangular Prediction Mode of VVC that supports the triangular partitioning prediction, the proposed method derives two prediction blocks using Horizontal and Vertical modes and then it blends the predicted blocks applying masks with triangle shape to generate a final prediction block. The experimental results of the proposed method showed an average of 1.86%, 1.49%, and 1.55% coding efficiency in YUV, respectively, for VVC screen content test sequences.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1399-1404
• /
• 2004

The development of computer technology and the advancement of the technology of information and communications spread the technology of multimedia and increased the use of multimedia data with large capacity. Users can grasp the overall video data and they are able to play wanted video back. To grasp the overall video data it is necessary to offer the list of summarized video data information. In order to search video efficiently an index process of video data is essential and it is also indispensable skill. Therefore, this thesis suggested the effective method about the cut detection of frames which will become a basis of an index based on contents of video image data. This suggested method was detected as the unchanging pixel rotor intelligence value, classified into diagonal direction. Pixel value of color detected in each frame of video data is stored as A(i, i) matrix - i is the number of frames, i is an image height of frame. By using the stored pixel value as the method of UE(Mean Square Error) I calculated a specified value difference between frames and detected cut quickly and exactly in case it is bigger than threshold value set in advance. To carry out an experiment on the cut detection of lames comprehensively, 1 experimented on many kinds of video, analyzing and comparing efficiency of the cut detection system.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.317-325
• /
• 2012

The Varian PORTALVISION (Varian Medical Systems, US) shows significant overresponses as the off-center distance increases compared to the predicted dose. In order to correct the dose discrepancy, the off-axis correction is applied to VARIAN iX linear accelerators. The portal dose for $38{\times}28cm^2$ open field is acquired for 6 MV, 15 MV photon beams and also are predicted by PDIP algorithm under the same condition of the portal dose acquisition. The off-axis correction is applied by modifying the $40{\times}40cm^2$ diagonal beam profile data which is used for the beam profile calibration. The ratios between predicted dose and measured dose is modeled as a function of off-axis distance with the $4^{th}$ polynomial and is applied to the $40{\times}40cm^2$ diagonal beam profile data as the weight to correct measured dose by EPID detector. The discrepancy between measured dose and predicted dose is reduced from $4.17{\pm}2.76$ CU to $0.18{\pm}0.8$ CU for 6 MV photon beam and from $3.23{\pm}2.59$ CU to $0.04{\pm}0.85$ CU for 15 MV photon beam. The passing rate of gamma analysis for the pyramid fluence patten with the 4%, 4 mm criteria is improved from 98.7% to 99.1% for 6 MV photon beam, from 99.8% to 99.9% for 15 MV photon beam. IMRT QA is also performed for randomly selected Head and Neck and Prostate IMRT plans after applying the off-axis correction. The gamma passing rare is improved by 3% on average, for Head and Neck cases: $94.7{\pm}3.2%$ to $98.2{\pm}1.4%$, for Prostate cases: $95.5{\pm}2.6%$, $98.4{\pm}1.8%$. The gamma analysis criteria is 3%, 3 mm with 10% threshold. It is considered that the off-axis correction might be an effective and easily adaptable means for correcting the discrepancy between measured dose and predicted dose for IMRT QA using EPID in clinic.

• Korea Science and Art Forum
• /
• v.37 no.4
• /
• pp.205-216
• /
• 2019

Today, there have been more museums with architectural freeform structure. From an academic perspective, that caused a change in the paradigm of the genealogy of architectural forms. Accordingly, it has been required to find whether the freeform architecture influences an exhibition space. Therefore, in order to analyze the correlation between freeform architecture and exhibition space, this study looks into the tendency of actual freeform architecture through case analysis after 2000. An exhibition space of museum serves as a socially, culturally, and locally symbolic icon and has the function of delivering information to viewers through the aesthetic presentation of articles on exhibition. This study is meaningful in the point that it drew the conclusion of the correlation between freeform architecture and exhibition space in order to infer that a freeform exhibition space is more effective at viewers' spatial experience. The method and results of this study are presented as follows: Firstly, literature survey on the concept of the freerform architecture of museum and the classification of architectural forms was conducted and previous studies were analyzed in order to establish criteria. Secondly, a case study was conducted through visits to Singapore, Germany, and the Netherlands in order to look into the current state and characteristics of freeform architecture and exhibition space. In this case, Karel Vollers' architectural freeform criteria were used for analysis. Thirdly, to prove the correlation between freeform architecture and exhibition space, each case was cross-checked on the basis of Karel Vollers' architectural freeform criteria and freeform exhibition classification, and then results were drawn. The study results are presented as follows: Firstly, EX(angle, ortho) of freeform architecture had a significant correlation with the diagonal form of exhibition space. That was proved 92.3% accurately more in the Netherlands and Germany than in Singapore. However, the curve form of exhibition space had a unclear correlation. In Singapore case, the curve form correlation was made through RO, FR, and TW. Secondly, freeform architecture had complex-typed combination with the diagonal and curve forms of exhibition space. In particular, N-02 and G-02 had a combination form, basically EX, and partially various forms so as to induce the complexity of free form. As such, architectural freeform makes it possible to achieve infinite transformation in various combinations. For responses, combinational approaches are required in multilateral ways. Based on this study, it will be planned to analyze the correlation between freeform architecture of museum and exhibition presentation.