• Computers and Concrete
• /
• v.10 no.2
• /
• pp.173-196
• /
• 2012

Experimental results of cyclic reversed lateral force test on a two-story reinforced concrete shear wall sub-assemblage are simulated analytically by using the PERFORM-3D program. A comparison of experimental and analytical results leads to the following conclusions: (1) "Shear Wall" and "General Wall" models with "Concrete shear" cannot simulate the pinching phenomena due to shear and show larger amounts of inelastic energy absorption than those in the experiment. (2) Modeling a story-height wall by using two or more "General Wall" elements with "Diagonal shear" in the vertical direction induces the phenomenon of swelling-out at the belly, leading to the erroneous simulation of shear behaviors. In application to tall building structures, it is recommended to use one element of "General Wall" with "Diagonal shear" for the full height of a story. (3) In the plastic hinge area, concrete deformations of analytical models overestimate elongation and underestimate shortening when compared with experimental results.

• Steel and Composite Structures
• /
• v.13 no.1
• /
• pp.1-13
• /
• 2012

In this study, a new structural bracing system named 'Hat Knee Bracing' (HKB) is presented. In this structural system, a special form of diagonal braces, which is connected to the knee elements instead of beam-column joints, is investigated. The diagonal elements provide lateral stiffness during moderate earthquakes. However the knee elements, which is a fuse-like component, is designed to have one plastic joint in the knee elements for dissipation of the energy caused by strong earthquake. First, a suitable shape for brace and knee elements is proposed through elastic studying of the system and several practical parameters are established. Afterward, by developing applicable and highly accurate models in Drain-2DX, the inelastic behavior of the system is carefully considered. In addition, with inelastic study of the new bracing system and comparison with the prevalent Knee Bracing Frame system (KBF model) in nonlinear static and dynamic analysis, the seismic behavior of the new bracing system is reasonably evaluated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.988-991
• /
• 1996

The purpose of this thesis is to develop methods of designing robust LQR/LQG controllers for time-varying systems with real parametric uncertainties. Controller design that meet desired performance and robust specifications is one of the most important unsolved problems in control engineering. We propose a new framework to solve these problems using Linear Matrix Inequalities (LMls) which have gained much attention in recent years, for their computational tractability and usefulness in control engineering. In Robust LQR case, the formulation of LMI based problem is straightforward and we can say that the obtained solution is the global optimum because the transformed problem is convex. In Robust LQG case, the formulation is difficult because the objective function and constraint are all nonlinear, therefore these are not treatable directly by LMI. We propose a sequential solving method which consist of a block-diagonal approach and a full-block approach. Block-diagonal approach gives a conservative solution and it is used as a initial guess for a full-block approach. In full-block approach two LMIs are solved sequentially in iterative manner. Because this algorithm must be solved iteratively, the obtained solution may not be globally optimal.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.2
• /
• pp.29-35
• /
• 1993

A guided-wave TE to TM mode converter was demonstrated by using of the off-diagonal electrooptic coefficients in LiTaO$_{3}$. The input mode is coupled to the other orthogonal mode by the electrooptically induced off-diagonal polarizability. Compared with LiNbO$_{3}$, LiTaO$_{3}$ provides a smaller birefringence and thus a larger phase match period and larger optical bnadwidth. A novel electrode structure allowed a first-order Bragg-coupling phase matching. TE/TM mode conversion efficiency of 90% at 25 [V] was demonstrated with ${\lambda}$=0.63$\mu$m He-Ne laser.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.1
• /
• pp.87-94
• /
• 2020

A corrugated steel plate wall (CSPW) system is advantageous to secure the strength and stiffness required for lateral force resistance because of its high out-of-plane stability. It can also stably dissipate large amounts of energy even after peak strength. In this paper, a preliminary study has been carried out to use the CSPW system in the seismic retrofit of existing reinforced concrete (RC) moment frame buildings. The seismic performance for an example building was evaluated, and then a step-by-step retrofit design procedure for the CSPW was proposed. An equivalent analytical model of the CSPW was also introduced for a practical analysis of the retrofitted building, and the strengthening effect was finally evaluated based on the results of nonlinear analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1189-1192
• /
• 2008

A new mercury-free flat fluorescent lamp with a single cell having dimension 2.2inches across the diagonal, had been developed which shows a wide, stable operating voltage margin, high luminance and luminous efficacy by adopting the bipolar pulse drive scheme. In this paper, the single cell is expanded into a multi-structured configuration to realize a 32inch sized panel across the diagonal by a simple repetition of the single cells. A driving scheme is proposed for a 2-bit areal selective dimming using dual auxiliary electrodes and bipolar drive scheme.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1003-1007
• /
• 2005

We demonstrate color video displays driven by carbon nanotube electron field emitters. These nanotubes are incorporated into the device by selective growth using low temperature chemical vapor deposition. The device structure is simple and inexpensive to fabricate, and a 45 V switching voltage enables the use of low cost driver electronics. The prototype units are sealed 4.6” diagonal displays with 726 um pixels. They represent a piece of a 42” diagonal 1280x720 high definition television. The carbon nanotube growth process is performed as the last processing step and creates nanotubes ready for field emission. No activation post-processing steps are required, so chemical and particulate contamination is not introduced. Control of the nanotube dimension, orientation, and spatial distribution during growth enables uniform, highquality, color video performance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.664-667
• /
• 2003

Super In Plane Switching (S-IPS) technology is applied for large TFT-LCD panels used in TV applications. It has a lot of advantages in comparison to the alternative, VA technology. S-IPS shows excellent viewing angle properties and fast response time between intermediate gray levels. If the performance parameters which describe the actual visual performance are considered, S-IPS is much more advantageous.$^{1)}$ However, it shows relatively low contrast ratio in diagonal direction compared to viewing angle characteristic in upper/down direction in S-IPS. In order to compensate the relatively low diagonal contrast ratio, a newly designed optical film was applied and the truly wide view angle of a S-IPS TW(True Wide)-IPS) was achieved. Our newly developed 30-inch TFT-LCD panel reveals TW-IPS that is optimized for TV application

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1231-1238
• /
• 1999

This paper presents an approach for the optimal heating load Identification using Diagonal Recurrent Neural Networks(DRNN). In this paper, the DRNN captures the dynamic nature of a system and since it is not fully connected, training is much faster than a fully connected recurrent neural network. The architecture of DRNN is a modified model of the fully connected recurrent neural network with one hidden layer. The hidden layer is comprised of self-recurrent neurons, each feeding its output only into itself. In this study, A dynamic backpropagation (DBP) with delta-bar-delta learning method is used to train an optimal heating load identifier. Delta-bar-delta learning method is an empirical method to adapt the learning rate gradually during the training period in order to improve accuracy in a short time. The simulation results based on experimental data show that the proposed model is superior to the other methods in most cases, in regard of not only learning speed but also identification accuracy.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1311-1316
• /
• 1999

A visual servoing method has been proposed based on disturbance observer to eliminate the effect of the off-diagonal component of image feature Jacobian, since performance indices such as measurement sensitivity of visual features, sensitivity of the control to noise and controllability could be improved when an image feature Jacobian was given as a block diagonal matrix. In this paper, experimental results of disturbance observer-based visual servoing are discussed where Samsung FARAMAN-AS1 6-axis industrial robot manipulator is employed. Also, the feature saturator is proposed to stabilize the disturbance observer loop by saturating the differential changes of the image features.