• Korean Journal of Radiology
• /
• 제23권9호
• /
• pp.854-865
• /
• 2022

Photon-counting detector (PCD) CT is a new CT technology utilizing a direct conversion X-ray detector, where incident X-ray photon energies are directly recorded as electronical signals. The design of the photon-counting detector itself facilitates improvements in spatial resolution (via smaller detector pixel design) and iodine signal (via count weighting) while still permitting multi-energy imaging. PCD-CT can eliminate electronic noise and reduce artifacts due to the use of energy thresholds. Improved dose efficiency is important for low dose CT and pediatric imaging. The ultra-high spatial resolution of PCD-CT design permits lower dose scanning for all body regions and is particularly helpful in identifying important imaging findings in thoracic and musculoskeletal CT. Improved iodine signal may be helpful for low contrast tasks in abdominal imaging. Virtual monoenergetic images and material classification will assist with numerous diagnostic tasks in abdominal, musculoskeletal, and cardiovascular imaging. Dual-source PCD-CT permits multi-energy CT images of the heart and coronary arteries at high temporal resolution. In this special review article, we review the clinical benefits of this technology across a wide variety of radiological subspecialties.

• 대한방사선기술학회지:방사선기술과학
• /
• 제2권1호
• /
• pp.85-88
• /
• 1979

When X-radiation passes through the human body; some is transmitted some is truly absorbed, and some is scattered. In diagnostic radiography, scattered radiation can reach the film if no protective measures are taken. This scattered ray increased density which not necessary for image formation. We studied about absorbtion, scattered ray and the way of get rid of scatter ray according to the x-ray tube kilovoltage and obtained results as follow; 1. Absorbtion ray increased proportion to KVP. 2. Scattered ray increased at high KVP and thick object. 3. Secondary radiation of the primary increased at high KVP and thick object. 4. Remove .ate of scattered ray decreased at thick object and increase at low KVP make use of 6:1 grid ratio

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.413-419
• /
• 2011

1950년대 진단용 X선 장치의 국산화가 이루어졌으며, 1960년 초부터 진단용 X선 장치의 수요가 급격히 증가함에 따라 생산업체의 증가로 의료기기 시장의 많은 발전을 가져왔다. 진단용 X선 장치는 방사선에 대한 인체의 위험 요소인 피폭문제가 있기 때문에 보건복지가족부가 제조, 설치기준을 제정하고 있으며, 이를 기본으로 하여 KSA 4019, KS A 4021, KS A 4022 등에 의해 정밀한 제작이 이루어지고 있다. 진단용 X선 발생장치는 단상 전파 정류형과 삼상 전파 정류형이 대부분이나, 1980년대 이후 인버터식 X선 발생장치로 대부분 전환되기 시작하였다. 인버터식 X선 발생장치는 단상 전파정류형 X선 발생장치에 비해 1.5~1.8배의 높은 출력과 단시간 제어가 정확하지만, 가격이 비싸기 때문에 개인병원에서는 단상전파정류형 X선 장치를 선호하고 있어 단상 전파정류형 X선 장치의 성능개선이 요구된다. 이에 본 연구자들은 단상 전파정류형 X선 발생장치의 제어장치, 고전압 변압기, 필라멘트 가열변압기, 정류회로, 고압케이블 등 기기의 구성요소를 제작하고 진단용 X선 발생장치의 성능평가를 시험하였으며, 그 결과 국내 규정인 진단용 방사선 발생장치의 안전관리 규칙에 적합한 기준을 얻을 수 있었다.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.207-212
• /
• 2015

When performing Chest x-ray examination to pregnant woman, normally we shield back side of abdomen. In this situation, scattered rays made by equipment and surrounding structure can enter front side of abdomen. Therefore, in this study, we evaluate suitability of abdomen shield especially to pregnant woman. In case of One shielding material placed back of abdomen, the measured value is $0.676{\pm}0.19uSv/hr$. Two shielding material is $0.764{\pm}0.04uSv/hr$. Three is $0.685{\pm}0.16uSv/hr$. The exposure dose inferred in this study does not excess annual effective dose limit. But It is not mean absolute safety. So we have to minimize occurrence of stochastic effect of radiosensitivity by shielding front side of abdomen of pregnant woman in clinic.

• 대한디지털의료영상학회논문지
• /
• 제8권1호
• /
• pp.51-55
• /
• 2006

moving photocarrier grating(MPG)기술을 이용하여 디지털 X-선 변환물질 a-Se:As 필름에서 As 첨가효과에 관하여 연구하였다. 이 방법은 시료를 조사하기 위하여 주파수를 변화시킨 2개 레이저 빔의 중첩으로 얻어진 움직이는 간섭패턴을 이용한다. 시료의 수송변수는 시료에서 변조 방향으로 유도되는 grating-속도에 의존하는 전류밀도로부터 얻어진다. As 첨가에 따른 a-Se 필름의 전자와 정공 이동도 그리고 재결합 수명을 구하였다. 전자의 이동도는 결함 상태 때문에 As 첨가에 따라 감소하는 반면, 특히 a-Se 필름에 0.3% As 첨가할 때 정공 이동도와 재결합 수명이 증가하였다. MPG 기술로 얻은 As가 첨가된 a-Se 필름의 수송성질을 a-Se:As로 제작한 X-선 detector의 X-선 감도와 비교하였다. 실험결과 0.3% As가 첨가된 a-Se으로 제작한 X-선detector가 가장 우수한 X-선 감도를 나타내었다.

• 대한의용생체공학회:의공학회지
• /
• 제13권1호
• /
• pp.19-24
• /
• 1992

Lineacgrams are diagnostic films taken using X-ray from the linear accelerator with the patient in the treatment position to assure that the treatment is being delivered in accordance with the treatment prescription. But the image quality of the lineacgram is so bad because of the high X-ray energy. This paper presents a new algorithm that enhances the image of lineacgram. Thls algorithm calculates optimal threshold value which is used for segmentation of lineacgram using co-occurrence matrix and enhances the image Inside and outside treatment area preserving treatments boundary.

• 대한방사선협회지
• /
• 제27권2호
• /
• pp.229-251
• /
• 2001

At the investigations with 200 institutes for analysis of factor associated with radiographic conditions reduction of patient exposure dose during X-ray diagnosis, 170 institutes or $85\%$ answered. For estimation of exposure dose the entrance

• 한국방사선학회논문지
• /
• 제10권2호
• /
• pp.117-124
• /
• 2016

본 연구에서는 디지털 의료용 X선을 이용하여 소듐냉각고속로 금속연료봉 내부의 소듐 충전상태를 평가하고자 하였다. 의료용 X선은 디지털방사선(digital radiography, DR)시스템을 사용하였다. 최상의 공간분해능을 도출하기 위해 X선관의 초점크기와 디지털영상후처리 방법을 변화시켰다. 이때 텅스텐을 이용한 에지방법의 변조전달함수(modulation transfer function, MTF)를 사용하여 선예도(0.5 MTF)와 해상도(0.1 MTF) 를 평가하였다. 그 결과 소초점에서 영상후처리의 대조도를 강화시킨 조건에서 3.871 lp/mm (0.1 MTF)와 3.290 lp/mm (0.5 MTF)의 공간분해능을 얻었다. 결론적으로 이러한 결과는 디지털 의료용 X선을 이용하여 소듐냉각고속로 금속연료봉 내부의 소듐 충전상태를 관찰할 수 있었다.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.111-115
• /
• 2016

Background: The scattered photons cause reduction of the contrast of radiographic image and it results in the degradation of the quality of the image. In order to acquire better quality image, an anti-scattering x-ray gird should be equipped in radiography system. Materials and Methods: The X-ray anti-scattering grid of the inclined type based on the hybrid concept for that of parallel and focused type was tested by MCNP code. The MCNPX 2.7.0 was used for the simulation based test. The geometry for the test was based on the IEC 60627 which was an international standard for diagnostic X-ray imaging equipment-Characteristics of general purpose and mammographic anti-scatter grids. Results and Discussion: The performance of grids with four inclined shielding material types was compared with that of the parallel type. The grid with completely tapered type the best performance where there were little performance difference according to the degree of inclination. Conclusion: It was shown that the grid of inclined type had better performance than that of parallel one.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.388-391
• /
• 2003

The properties of these detectors can be controlled by electronics and exposure conditions. Flat-panel detectors for digital diagnostic imaging convert incident x-ray images to charge images. Flat panel detectors gain more interest real time medical x-ray imaging. Active area of flat panel detector is $14{\times}17$ inch. Detector is based on a $2560{\times}3072$ away of photoconductor and TFT pixels. X-ray conversion layer is deposited upper TFT array flat panel with a 500m by thermal deposition technology. Thickness uniformity of this layer is made of thickness control technology(5%) of thermal deposition system. Each $139m{\times}139m$ pixel is made of thin film transistor technology, a storage capacitor and charge collection electrode having geometrical fill factor of 86%. Using the separate driving system of two dimensional mosaic modules for large area, that is able to 4.2 second per frame. Imaging performance is suited for digital radiography imaging substitute by conventional radiography film system..