• 한국안전학회지
• /
• 제19권1호
• /
• pp.23-30
• /
• 2004

Modern production systems are very complex by request of automation, and failure modes that occur in thisautomatic system are very various and complex. The efficient fault diagnosis for these complex systems is essential for productivity loss prevention and cost saving. Traditional fault diagnostic system which perforns sequential fault diagnosis can cause catastrophic failure during diagnosis when fault propagation is very fast. This paper describes the Real-time Intelligent Multiple Fault Diagnosis System (RIMFDS). RIMFDS assesses current machine condition by using sensor signals. This system deals with multiple fault diagnosis, comprising of two main parts. One is a personal computer for remote signal generation and transmission and the other is a host system for multiple fault diagnosis. The signal generator generates various faulty signals and image information and sends them to the host. The host has various modules and agents for efficient multiple fault diagnosis. A SUN workstation is used as a host for multiple fault modules and agents for efficient multiple fault diagnosis. A SUN workstation is used as a host for multiple fault diagnosis and graphic representation of the results. RIMFDS diagnoses multiple faults with fast fault propagation and complex physical phenomenon. The new system based on multiprocessing diagnoses by using Hierarchical Artificial Neural Network (HANN).

• 간호행정학회지
• /
• 제9권2호
• /
• pp.183-191
• /
• 2003

Purpose : to survey about satisfaction of nurses of NANDA nursing diagnosis and NIC nursing interventions and system's usefulness of information system forusing 10 medical diagnosis. Method : nurses learned about this system and used this system for 4 or 8 weeks. After that survey about satisfaction and usefulness of this system. Result : The good points of the nursing diagnosis systems are a rapid selection, accuracy, convenience of the using system. The good points of the nursing intervention system are same as the nursing diagnosis system. About the good points of the general system are easiness, improvement of nursing knowledge, convenience, etc. However, further studies for pilot operations of the system are mandatory. Conclusion : We expect this system can be used in many hospitals efficiently in the future after pilot operations are completed in some hospitals. After verifying the usefulness of the system through pilot operations, the further analysis on the relationship between medical diagnosis and NANDA nursing diagnosis is also necessary for the generalization.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.9-16
• /
• 2007

This paper describes the design and implementation of the fault diagnosis on the Electronic Throttle Control(ETC) System. The proposed fault diagnosis consists of an input signal, actuator and a processor diagnosis. The input signal diagnosis can detect the faults of the ETC system's input signals such as the position sensor fault, source voltage fault, load current fault, and desired position fault. The actuator diagnosis is able to detect the actuator fault due to the actuator aging and an obstacle which interfere in the movement of the actuator. The processor diagnosis detects the fault which prevents the microprocessor from operating the ETC software. In order to protect the breakdown of the ETC system and assure the driving safety, appropriate reactions are also proposed according to the detected faults. The safety and reliability of the ETC system can be improved by the proposed fault diagnosis.

• 품질경영학회지
• /
• 제52권2호
• /
• pp.357-376
• /
• 2024

Purpose: The purpose of this study is to design an objective and comparable diagnostic system for diagnosing the technology level of military maintenance depots and verify its actual applicability. Methods: Literature Review, Capability Maturity Model Integration, Analytic Hierarchy Process. Results: Military maintenance depot maintenance quality level diagnosis items, Maintenance quality level by maintenance technology area, Guidelines for diagnosing maintenance quality level, Quality level comparison results by area and implications for improvement. Conclusion: In order to systematically evaluate the maintenance quality of military maintenance depots, this study was conducted with the goal of designing an overall maintenance quality diagnosis system, including diagnosis areas, diagnosis items, and a diagnosis score award system, by improving the existing evaluation method. In addition, the newly developed maintenance quality diagnosis system was applied to actual evaluation activities and the results were returned to members, confirming the usefulness of the developed maintenance quality diagnosis system in the field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3192-3194
• /
• 2000

Many I/o cards such as AOCs, DICs, DOCs and ROCs are used to deal with I&C instruments of control panel in full-scope power plant simulator. To help the maintenance of I/O cards, an I/o card fault diagnosis system is implemented in this paper. The implemented fault diagnosis system has the automatic fault diagnosis function and manual card test function for fault diagnosis. Finally, the test result using I/O cards shows the validity of the implemented fault diagnosis system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.670-675
• /
• 1994

Yhis paper describes a fault diagnosis simulation of the Real-Time Multiple Fault Dignosis System (RTMFDS) for forcasting faults in a system and deciding current machine state from signal information. Comparing with other diagnosis system for single fault,the system developed deals with multiple fault diagnosis,comprising two main parts. One is a remotesignal generating and transimission terminal and the other is a host system for fault diagnosis. Signal generator generate the random fault signal and the image information, and send this information to host. Host consists of various modules and agents such as Signal Processing Module(SPM) for sinal preprocessing, Performence Monotoring Module(PMM) for subsystem performance monitoring, Trigger Module(TM) for multi-triggering subsystem fault diagnosis, Subsystem Fault Diagnosis Agent(SFDA) for receiving trigger signal, formulating subsystem fault D\ulcornerB and initiating diagnosis, Fault Diagnosis Module(FDM) for simulating component fault with Hierarchical Artificial Neural Network (HANN), numerical models and Hofield network,Result Agent(RA) for receiving simulation result and sending to Treatment solver and Graphic Agent(GA). Each agent represents a separate process in UNIX operating system, information exchange and cooperation between agents was doen by IPC(Inter Process Communication : message queue, semaphore, signal, pipe). Numerical models are used to deseribe structure, function and behavior of total system, subsystems and their components. Hierarchical data structure for diagnosing the fault system is implemented by HANN. Signal generation and transmittion was performed on PC. As a host, SUN workstation with X-Windows(Motif)is used for graphic representation.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.199-205
• /
• 2004

This paper describes the fault diagnosis method to order to construct CIM in complex system with hierarchical structure similar to human body structure. Complex system is divided into unit, item and component. For diagnosing this hierarchical complex system, it is necessary to implement a special neural network. Fault diagnosis system can forecast faults in a system and decide from the signal information of current machine state. Comparing with other diagnosis system for a single fault, the developed system deals with multiple fault diagnosis, comprising hierarchical neural network (HNN). HNN consists of four level neural network, i.e. first is fault symptom classification and second fault diagnosis for item, third is symptom classification and forth fault diagnosis for component. UNIX IPC is used for implementing HNN with multitasking and message transfer between processes in SUN workstation with X-Windows (Motif). We tested HNN at four units, seven items per unit, seven components per item in a complex system. Each one neural network represents a separate process in UNIX operating system, information exchanging and cooperating between each neural network was done by message queue.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권9호
• /
• pp.512-519
• /
• 2000

A Neural networks has been used for a expert system and fault diagnosis system. It is possible to nonlinear function mapping and parallel processing. Therefore It has been developing for a Diagnosis system of nuclear plower plant. In general Neural Networks is a static mapping but Dynamic Neural Network(DNN) is dynamic mapping.쪼두 a fault occur in system a state of system is changed with transient state. Because of a previous state signal is considered as a information DNN is better suited for diagnosis systems than static neural network. But a DNN has many weights so a real time implementation of diagnosis system is in need of a rapid network architecture. This paper presents a algorithm for RCP monitoring Alarm diagnosis system using Self Dynamic Neural Network(SDNN). SDNN has considerably fewer weights than a general DNN. Since there is no interlink among the hidden layer. The effectiveness of Alarm diagnosis system using the proposed algorithm is demonstrated by applying to RCP monitoring in Nuclear power plant.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.135-146
• /
• 1997

This paper describes fault diagnosis method in complex system with hierachical structure similar to human body structure. Complex system is divided into unit, item and component. For diagnosing this hierarchical complex system, it is necessary to implement special neural network. Fault diagnosis system can forecast faults in a system and decide from current machine state signal information. Comparing with other diagnosis system for single fault, the developed system deals with multiple fault diagnosis comprising Hierarchical Neural Network(HNN). HNN consists of four level neural network, first level for item fault symptom classification, second level for item fault diagnosis, third level for component symptom classification, forth level for component fault diagnosis. UNIX IPC(Inter Process Communication) is used for implementing HNN wiht multitasking and message transfer between processes in SUN workstation with X-Windows(Motif). We tested HNN at four units, seven items per unit, seven components per item in a complex system. Each one neural newtork operate as a separate process in HNN. The message queue take charge of information exdhange and cooperation between each neural network.

• 대한한의진단학회지
• /
• 제12권2호
• /
• pp.107-126
• /
• 2008

Background : There was seldom study about method that diagnose 8 Constitution beside method of pulse diagnosis in 8 Constitution Medicine. Objectives : This study is to make out 8 Constitution Medicine Diagnosis Expert System Development used CBR(Case based Reasoning). Methods : First, at case base construction process we constructed case base for CBR embodiment because gathering 925 cases all to patient who constitution is verified, and second, at study model establishment process superior expert system development by purpose CBR of reasoning process dividing fundamental type CBR that spend basis data value and expert type CBR that reflect weight in basis data value accordin I II III to advice expert opinion, and third, system embodiment process explained about way to give process and weight that diagnose constitution through Nearest Neighbor Method sampling process of CBR techniques, and fourth, at system estimation process we selected superior CBR model because comparing and estimate the diagnosis rate of expert system with fundamental type system (GECBR) model and expert type I II III CBR system (AVCBR, AACBR, AGCBR) model that reflect expert opinion in fundamental type system. GECBR and AGCBR chose on superior study model. Through such 4 study process, we developed 8 constitution diagnosis expert system lastly. Results : 1. When we select GECBR that is fundamental type by reasoning system, diagnosis rate 78.91% of 8 constitution diagnosis expert system is expected, and the constitution diagnosis rate Hepatonia 90.4%, Cholecystonia 63.0%, Pancreotonia 91.1%, Gastrotonia 0%, Pulmotonia 71.2%, Colonotonia 74.4%, Renotonia 37.5%, Vesicotonia 67.1% expect. 2. When we select AGCBR that is expert type III by reasoning system, diagnosis rate 77.51% of 8 constitution diagnosis expert system is expected, and the constitution diagnosis rate Hepatonia 93.4%, Cholecystonia 58.5%, Pancreotonia 91.1%, Gastrotonia 0%, Pulmotonia 73.1%, Colonotonia 64.4%, Renotonia 41.7%, Vesicotonia 72.2% expect. Conclusion : Based on this study, 8 constitution diagnosis expert system may give help to diagnose 8 constitution, and it is going to utilize as objective estimation tool of 8 constitution diagnosis, and further study for 8 Constitution Medicine Diagnosis Expert System Development used CBR(Case based Reasoning) is needed to supplement this study.