• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1306-1313
• /
• 2018

The randomness and incipient nature of certain faults in reactor systems warrant a robust and dynamic detection mechanism. Existing models and methods for fault diagnosis using different mathematical/statistical inferences lack incipient and novel faults detection capability. To this end, we propose a fault diagnosis method that utilizes the flexibility of data-driven Support Vector Machine (SVM) for component-level fault diagnosis. The technique integrates separately-built, separately-trained, specialized SVM modules capable of component-level fault diagnosis into a coherent intelligent system, with each SVM module monitoring sub-units of the reactor coolant system. To evaluate the model, marginal faults selected from the failure mode and effect analysis (FMEA) are simulated in the steam generator and pressure boundary of the Chinese CNP300 PWR (Qinshan I NPP) reactor coolant system, using a best-estimate thermal-hydraulic code, RELAP5/SCDAP Mod4.0. Multiclass SVM model is trained with component level parameters that represent the steady state and selected faults in the components. For optimization purposes, we considered and compared the performances of different multiclass models in MATLAB, using different coding matrices, as well as different kernel functions on the representative data derived from the simulation of Qinshan I NPP. An optimum predictive model - the Error Correcting Output Code (ECOC) with TenaryComplete coding matrix - was obtained from experiments, and utilized to diagnose the incipient faults. Some of the important diagnostic results and heuristic model evaluation methods are presented in this paper.

• 한국주거학회논문집
• /
• 제26권2호
• /
• pp.67-79
• /
• 2015

As the Korean construction market in the apartment housing has changed to a housing consumer focused market, interest and importance on efficient use and management on existing buildings has increased rather than demand for new buildings. Interest of housing consumers on apartment house quality has increased in this market paradigm, and this spontaneously is connected to quality flaw related defect disputes and lawsuits that the importance of defect diagnosis has continuously increased. This defect diagnosis is directly connected to maintenance charges in defect dispute and lawsuit processes that rather objective and highly credible progress of duty is required. However, most defect diagnosis firms today that progress defect diagnosis are using different diagnosis methods and depend on the experience of experienced professionals that there is no standardized defect diagnosis process. Therefore, the purpose of this study is to provide common defect diagnosis process model for defect diagnosis firms utilizing the BPMN (Business Process Modeling Notation) modeling method. It is expected that this will contribute to professional and reliable task performances of concerned defect diagnosis workers. Furthermore, it is expected that design lawsuit damage will be substantially reduced by standardizing defect diagnosis processes.

• 대한간호
• /
• 제33권3호
• /
• pp.79-91
• /
• 1994

The purpose of this study was to identify the meaningful nursing diagnosis in maternity unit and to suggest formally the basal data to the nursing service with scientific approach. The subject for this paper were 64 patients who admitted to Chung Ang University Hospital, Located in Seoul, from Mar. 10, to July 21, 1993. The results were as follows: 1. The number of nursing diagnosis from 64 patients were 892 and average number of nursing diagnosis per patient was 13.9. 2. Applying the division of nursing diagnosis to Roy's Adaptation Model, determined nursing diagnosis from the 64 patients were 621 (69.6%) in physiological adaptation mode and (Comfort, altered r/t), (Injury, potential for r/t), (Infection, potential for r/t), (Bowel elimination, altered patterns r/t), (Breathing pattern, ineffective r/t), (Nutrition, altered r/t less than body requirement) in order, and 139 (15.6%) in role function mode, (Self care deficit r/t), (Knowledge deficit r/t), (Mobility, impaired physical r/t) in order, 122 (13.7%) in interdependence adaptation mode, (Anxiety r/t), (Family Process, altered r/t) in order, 10(1.1%) in self concept adaptation mode, (Powerlessness r/t), (Grieving, dysfunctional r/t) in order. 3. Nursing diagnosis in maternity unit by the medical diagnosis, the average hospital dates were 3.8 days in normal delivery and majority of used nursing diagnosis, (Comfort, altered r/t) 64.6%, (Self care deficit r/t) 13.6% in order, and the average hospital dates were 9.6 days in cesarean section delivery and majority of used nursing diagnosis, (Comfort, altered r/t) 51.6%, (Self care deficit r/t) 15.2%, (Infection, potential for r/t) 9.9%, (Injury, potential "for r/t) 8.1%, (Anxiety r/t) 5.0%, (Mobility, impaired physical r/t) 3.3% in order, and the average hospital dates were 15.8days in preterm labor and majority of used nursing diagnosis, (Comfort, altered r/ t), (Anxiety r/t), (Injury, potential for r/t) in order, and the average short-term hospital dates were 2.5days, long-term hospital dates were 11.5days in gynecologic diseases and majority of used nursing diagnosis, (Comfort, altered r/t). (Self care deficit r/t), (Injury, potential for r/t), (Infection, potential for r/t) in order.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.272-275
• /
• 1992

A novel fault diagnosis method based on likelihood decomposition is proposed for linear stochastic systems described by autoregressive (AR) model. Assuming that at some time instant .tau. the fault of one of the following two types is occurs: innovation fault (actuator fault); and observation fault (sensor fault), the log-likelihood function is decomposed into two components based on the observations before and after .tau., respectively, Then, the type of the fault is determined by comparing the log-likelihoods corresponding two types of faults. Numerical examples demonstrate the usefulness of the proposed diagnosis method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.24-26
• /
• 2005

At present, KS-1000 which is one of a commercial measurement instrument for motor fault diagnosis has been used in industrial field. The measurement system of KS-1000 is composed of three part : harmonic acquisition, signal processing by KS-1000 algorithm, diagnosis for motor fault. First of all, voltage signal taken from harmonic sensor is analysed for frequency by KS-1000 algorithm. Then, based on the result values of analysis skilled expert makes a judgment about whether motor system is the abnormality or degradation state. But the expert system such a motor fault diagnosis is very difficult to bring the expectable results by mathematical modeling due to the complexity of judgment process. In this reason, we propose an automation system using fuzzy model based on genetic algorithm(GA) that builded a qualitative model of a system without priori knowledge about a system provided numerical input output data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1328-1333
• /
• 2006

For fault diagnosis of machines and equipments, knowledge-based method has been used widely but has some limitations for complex systems. These can be covered by model-based method. As one kind of model-based method, Qualitative modeling diagnosis method is developed in this research. The developed method uses output signal only. In this method quantization of the output signal mattes automata which can characterize the flow of the signal pattern to normal and fault respectively. As an example of the qualitative diagnosis method, an electric tool which has faults at gear and bearing were examined in this research. The result shows that the developed method can diagnose the fault clearly for the two fault cases.

• 한국통신학회논문지
• /
• 제39A권5호
• /
• pp.244-250
• /
• 2014

The Most Serious Engine Faults Are Those That Occur Within The Engine. Traditional Engine Fault Diagnosis Is Highly Dependent On The Engineer'S Technical Skills And Has A High Failure Rate. Neural Networks And Support Vector Machine Were Proposed For Use In A Diagnosis Model. In This Paper, Noisy Sound From Faulty Engines Was Represented By The Mel Frequency Cepstrum Coefficients, Zero Crossing Rate, Mean Square And Fundamental Frequency Features, Are Used In The Hidden Markov Model For Diagnosis. Our Experimental Results Indicate That The Proposed Method Performs The Diagnosis With A High Accuracy Rate Of About 98% For All Eight Fault Types.

• 전기학회논문지P
• /
• 제65권3호
• /
• pp.188-193
• /
• 2016

It has been proven that the dissolved gas analysis (DGA) is the most effective and convenient method to diagnose the transformers. The DGA is a simple, inexpensive, and non intrusive technique. Among the various diagnosis methods, IEC 60599 has been widely used in transformer in service. But this method cannot offer accurate diagnosis for all the faults. This paper proposes a fault diagnosis method of oil-filled power transformers using DGA and Intelligent Probability Model. To demonstrate the validity of the proposed method, experiment is performed and its results are illustrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.103-104
• /
• 2006

Since the first proposition of IEC61850 object model at 1993, many questions about making a seamless model have been issued. the reason which they have worry about is that the functions of the equipment are supposed to be changed properly and new equipment and scheme are need to be introduced according to user's application. To handle those issues, TC57 which is a IEC committee for power control and communication has continuously updated the object model. Nowadays along with the new object model involving power quality, distribution resource and wind power, the committee has a plan to announce the revision of IEC61850-7-4. In the study, authors will present the prediction and diagnosis object models for transformer. Transformer models for protection and control have already been dealt with in the international standard but the models for prediction and diagnosis have never mentioned until now. Designing the prediction and diagnosis functions with the existing IEC61850-7-4, it'll be shown what is a proper object model for prediction and diagnosis.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.340-345
• /
• 1996

Because of limited resources of time and information processing capability during abnormal situation, diagnosis is difficult tasks in nuclear power plant (NPP) operators. Moreover since minimizing of adverse consequences according to process abnormalities is vital for the safety of NPP, introducing of diagnosis support systems have particularly emphasized. However, considerable works to develop effective diagnostic support system are not sufficiently fulfilled because of the complexity of NPP is one of the major problems. To cope with this complexity, a lot of model-based diagnosis support systems have considered and implemented worldwide. In this paper, as a prior step to development of model-based diagnosis support systems, primary side of pressurized water reactor is functionally modeled by multilevel flow modeling (MFM) concept. MFM is suitable for complex system modeling and for diagnosis of abnormalities. Furthermore, knowledge-based diagnosis process, of NPP operator could be supported because this diagnosis strategy can represent operator's one.