• 대한치과교정학회지
• /
• 제46권1호
• /
• pp.42-54
• /
• 2016

The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects.

• 대한세포병리학회지
• /
• 제14권1호
• /
• pp.1-6
• /
• 2003

Parathyroid carcinoma is a rare disorder accounting for 0.5% to 5% of parathyroid neoplasia. Diagnosis of parathyroid carcinoma in fine needle aspiration cytology (FNAC) is difficult because ail characteristic features of parathyroid carcinoma can be recognized in parathyroid adenoma or hyperplasia. Cellular atypism cannot be used for the diagnostic criteria of parathyroid carcinoma as malignancies of most other organs. We experienced two cases of cytologic features of parathyroid carcinoma confirmed by histologic examination. The majority of tumor cells formed large cohesive clusters, although individual tumor cells were also present. The tumor cells displayed rather pleomorphic round to oval nuclei, occasional prominent nucleoli, and distinct cytoplasmic margin. Occasionally karyolysis, anuclear cells, and nonepithelial cell clusters were noted. The histologic findings showed a partially lobulated architecture, with admixture of sheets of chief cells, oxyphil cells, and occasional water clear cells. The tumor infiltrated into the thyroid parenchyme and perithyroidal soft tissue. The electron microscopic study of case 1 disclosed typical findings of parathyroid neoplasm; clusters of secretory chief cells with centrally located round to ovoid nuclei, moderately clumped heterochromatins and one or two nucleoli. The tumor cells showed conspicous interdigitation of contiguous ceil membrane and intercellular microvilli.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.371-374
• /
• 2004

Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment. Safety, reliability, efficiency, and performance are some of the major concerns of induction motor applications. Preventive maintenance of induction motors has been a topic great interest to industry because of their wide range application of industry. Since the use of mechanical sensors, such as vibration probes, strain gauges, and accelerometers is often impractical, the motor current signature analysis (MACA) techniques have gained murk popularity as diagnostic tool. Fault tolerant control (FTC) strives to make the system stable and retain acceptable performance under the system faults. All present FTC method can be classified into two groups. The first group is based on fault detection and diagnostics (FDD). The second group is independent of FDD and includes methods such as integrity control, reliable stabilization and simultaneous stabilization. This paper presents the fundamental FDD-based FTC methods, which are capable of on-line detection and diagnose of the induction motors. Therefore, our group has developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. This paper presents its architecture. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module is checking stator current, voltage, temperatures, vibration and speed of the motor. The DSPs share information from each sensor or DSP through DPRAM with hardware implemented semaphore. And it communicates the motor status through field bus (CAN, RS485). From the designed system, we get primitive sensors data for the case of normal condition and two abnormal conditions of 3 phase induction motor control system is implemented. This paper is the first step to drive multi-motors with serial communication which can satisfy the real time operation using CAN protocol.

• 정보처리학회논문지B
• /
• 제19B권3호
• /
• pp.201-208
• /
• 2012

혈관 내 초음파 영상(IVUS: Intravascular ultrasoundimages)에서 내강(Lumen) 경계 영역을 검출하는 것은 환자의 심혈관 상태를 파악하는데 중요한 정보를 제공하며, 이를 통해 심혈관계 질환을 예측하고 진단할 수 있다. 따라서 정확하게 내강 경계를 분할하는 것은 매우 중요한 단계이다. 본 논문에서는 비모수적 확률 밀도 함수와 스무딩 함수를 사용하여 자동으로 내강 영역을 분할하는 기법을 제안한다. 각각의 혈관내 초음파 영상들을 극좌표 이미지로 변환 후 웨이블릿 변환을 적용하여 초기 관심 점들을 검출한다. 초기 관심점들 중에서 잡음과 칼슘에 의해 발생된 튀는 점들을 제거하기 위해 비모수적 밀도 함수와 스무딩 함수를 이용하여 튀는 점들을 제거하고 경계면에 해당하는 중요 관심 점만을 남긴다. 마지막으로, 다항곡선 접합(Polynomial curve fitting) 함수를 정의하고 다항식과 실제 내강 경계선에 접합된 관심 점을 이용하여 자연스러운 내강 경계면을 추정한다. 본 논문에서 제안한 방법을 다양한 초음파 영상에 대해 실험한 결과, 기존에 제안된 방법 보다 정확하게 경계면을 검출함을 알 수 있었다.

• 농촌계획
• /
• 제12권2호
• /
• pp.57-64
• /
• 2006

The experiment was carried out to determine the distribution of total coliform the translocation of heavy metals and the salt accumulation in soils following the supply of ground water, the domestic wastewater and the ultraviolet treatment of domestic wastewater during the spinach and the chinese cabbage cultivation. There were not much changes in the Total-N, Total-P and cations in soils following the ultraviolet treatment of the domestic wastewater. However, the density of total coliform was dramatically reduced from 894MPN/100mL to 5MPN/100mL. The diagnosis of composition of soil after the harvest of chinese cabbages and spinach has shown that the concentration of Na$^+$ was 3-4 times higher in plot using domestic wastewater than in plot using ground water. When domestic wastewater and ground water were used in growing spinach md chinese cabbage at 50% each, the application of chemical fertilizers reduced about 25% to 50% compared to the criteria set down by the Rural Development Administration and there was not significant difference in terms of harvest. Using non-ultraviolet treatment of domestic wastewater directly on spinach and chinese cabbage has resulted in excessive density of total coliform at 25,000MPN/100mL. Even when ultraviolet treatment, the density was still high at 2,000MPN/100mL. The high density of total coliform even following ultraviolet treatment of domestic wastewater is considered to be caused by photo-reactivation of micro-organism. When reusing domestic wastewater, the application of sterilization such as ultraviolet, ultrasonic and electron-beam for public health and hygiene reasons may provide safe supply of agricultural water.

• 대한핵의학회지
• /
• 제4권1호
• /
• pp.37-42
• /
• 1970

In an endeavor to help understand some typical scan findings and portal hemodynamics in liver cirrhosis, several commonly occurring scan changes and esophageal varices as demonstrated by esophagram were correlated one another from quantitative and qualitative stand points. Clinical materials consisted of 34 patients with proven diagnosis of liver cirrhosis and esophageal varices. Liver scan was performed with colloidal 198-Au and the changes in the size and internal architecture of the liver, splenic uptake and splenomegaly were graded and scored by repeated double-blind readings. The variceal changes on esophagrams were also graded according to the classification of Shanks and Kerley following modification. Of 34 patients, 91% showed definite reduction in liver volume (shrinkage) constituting the most frequent scan change. The splenic uptake and splenomegaly were noted in 73.5 and 79.4%, respectively. The present study revealed no positive correlation between the graded scan findings including shrinkage of the liver, splenic uptake or splenomegaly and severity of variceal changes of the esophagus. Exceptionally, however, apparently paradoxical correlation was noted between the severity of mottlings and varices. Thus, in the majority (73.5%) of patients mottlings were either absent or mild. This interesting observation is in favor of the view held by Christie et al. who consider the mottlings to be not faithful expression of actual scarring of the cirrhotic liver. This also would indicate that variceal changes are to be the results of intrahepatic arteriovenous shunting of blood with hypervolemic load to the portal system rather than simple hypertension secondary to fibrosis and shrinkage.

• 전자공학회논문지
• /
• 제50권2호
• /
• pp.114-121
• /
• 2013

Systems-On-Chips(SoC)에서 내장 메모리가 차지하는 비중은 비약적으로 증가하여 전체 트랜지스터 수의 80%~90%를 차지하고 있어, SoC에서 내장된 메모리에 대한 테스트 중요성이 증가하고 있다. 본 논문은 다양한 테스트 알고리즘을 지원하는 IEEE 1500 래퍼 기반의 프로그램 가능한 메모리 내장 자체 테스트(PMBIST) 구조를 제안한다. 제안하는 PMBIST는 March 알고리즘 및 Walking, Galloping과 같은 non-March 알고리즘을 지원하여 높은 flexibility, programmability 및 고장 검출률을 보장한다. PMBIST는 최적화된 프로그램 명령어와 작은 프로그램 메모리에 의해 최적의 하드웨어 오버헤드를 가진다. 또한 제안된 고장 정보 처리 기술은 수리와 고장 진단을 위해 2개의 진단 방법을 효과적으로 지원하여 메모리의 수율 향상을 보장한다.

• 전자공학회논문지
• /
• 제51권6호
• /
• pp.244-251
• /
• 2014

본 논문에서, 가스절연개폐장치(GIS)의 정상상태와 비정상상태에 대해 예방진단기술을 이용하여 자세하게 서술하였다. 이 기술은 지능형 GIS 감시시스템에 의해 저장된 GIS의 데이터의 분석과 진단에 근거한다. GIS음의 파형은 방전과 자체내의 코로나 방전음에 의해 발생되는 것으로 잡음과 비슷하다. 그러므로, 본 논문에서, GIS음의 정상 상태와 비정상 상태로 분류하는데, 정상과 비정상 상태를 레벨교차율(LCR)과 스펙트로그램 에너지비율로 이용하여 구분하였다.

• 전자공학회논문지T
• /
• 제36T권4호
• /
• pp.115-122
• /
• 1999

밀레니엄 버그 또는 2000년 연도표기(Century-Year) 문제라고 일컫는 Y2K 문제는 컴퓨터의 연도표기 방법이 두 자리 숫자로 설계되어 있어 2000년 이후의 연도를 인식하지 못해 생기는 문제이다. 이는 PC 하드웨어의 RTC(Real Time Clock) 칩 구조가 날짜와 연동하여 자동으로 세기(Century)정보를 변경할 수 없기 때문에 발생한다. 본 논문에서는 IBM PC 호환기종 RTC의 Y2K 하드웨어 문제를 분석하고, Y2K 하드웨어 문제를 해결하기 위하여 PC에 장착할 수 있는 별도의 Y2K 보정 보드를 제작하였다. 그리고 여러 종류의 국내, 외 Y2K 진단 프로그램으로 점검한 결과 Y2K 문제가 발생했던 PC들이 RTC 보정보드 장착 후에는 모두 문제가 없는 것으로 나타나 이를 IBM PC 호환 기종에서 RTC의 Y2K 하드웨어 문제 해결 방안으로 제시하고자 한다.

• Journal of Trauma and Injury
• /
• 제27권3호
• /
• pp.57-62
• /
• 2014

Purpose: A hamate body coronal fracture is well known as a very rare fracture in the carpal bones and is also hard to diagnose in initial stage due to the bone's architecture. We report our experience in treatment of such a fracture, and we present a review of the relevant literatures. Methods: Four patients who experienced hamate body coronal fractures from October 2006 to October 2013 were enrolled in this study. One patient also had an associated Capitate fracture, and two patients had associated dislocations of the $4^{th}$ metacarpal joint. We performed open reduction and mini-screw fixation on the four patients. In addition, a K-wire was fixed for the two patients with dislocations. Results: The average follow-up period was 24.5 months after surgery, and bone union was observed at the $8^{th}$ week after surgery. We confirmed that bone union had been completed for all the patients, and functional tests showed that joint motion was in the normal range without complications. Conclusion: When a patient has consistent pain on the ulnar side of the wrist, a hamate fracture should be suspected. Computer tomography is better than a simple X-ray scan for confirming the diagnosis of a hamate body coronal fracture. An open reduction and mini-screw fixation led to a good result.