• 기술사
• /
• 제15권3호
• /
• pp.33-36
• /
• 1982

Dewaxing Technique was reconized as the removal of waxy materials from the lubriating distillates for the purpose of the improvement of the low temperative fluidity of the lubricating oils. Recently this technique is developed not only the removal of the waxy materials but the reformation of the waxy materials which does not effect the low temperative fluidity of the lutricating oils. The cutalytic dewaxing technique is developed is this letter direction. And so I insist here the defintion of dewaxing technique must be defined as the technique of the removal and reforming technique of the waxy materials which effect the fluidity of the lubricating oils.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.15-21
• /
• 2012

The optimum dewaxing ratio in dewaxing treatment by the heat and pressure method was investigated by considering aging stability of dewaxed Hanji. Commercial Hanji was coated with beeswax and thermally aged at $150^{\circ}C$ for 24 hours. Then it was dewaxed using the laboratory sheet press equipped with hot plates on both top and bottom sides. Dewaxing ratio was controlled by pressing temperature and time. Four type of dewaxed Hanji samples with different dewaxing ratio were prepared and thermally aged at $150^{\circ}C$. Then the aging stability of dewaxed Hanji samples was evaluated in terms of optical and strength properties. It was found that the aging stability of dewaxed Hanji was superior with higher dewaxing ratio. The result concluded that, in the aspect of aging stability, the coated beeswax in beeswax-treated Hanji shall be completely removed if the coated wax would be dewaxed.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.56-62
• /
• 2014

This study aims to investigate the applicability of supercritical fluid extraction as a dewaxing technique to restore the beeswax-treated volume of the Annals of the Joseon Dynasty in various deterioration and damage conditions. Thus, this study analyzed the dewaxing efficiency and changes in physical and morphological properties before and after dewaxing, by applying the optimal supercritical fluid extraction dewaxing condition ($70^{\circ}C$, 40 MPa, $CO_2$, Co-solvent 20% DCM, 2 hour) to 3 kinds of beeswax-treated paper with different deterioration rates (dry artificial aging of 10, 20 and 30 days at $120^{\circ}C$). After dry artificial aging at $120^{\circ}C$ for 30 days, the average molecular weight of the beeswax-treated specimen was $1.856{\times}10^5g/mol$, showing deterioration about 80% of the beeswax-treated paper before dewaxing. It was a similar level to the molecular weight of the bees-waxed volume of the Annals of the Joseon Dynasty that has a higher degree of damage. As a result of analyzing the dewaxing efficiency through FT-IR analysis, this study discovered that it was possible to effectively dewax beeswax-treated paper in the range of deterioration 20 to 80% with this supercritical fluid extraction dewaxing technique applied. As a result of analyzing changes in the physical and morphological properties before and after dewaxing, the viscosity tended to decrease to a slight degree, and since no morphological deformation or damage of stencil fibers was found, it was concluded possible to conduct stable dewaxing through this supercritical fluid extraction technique.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.10-16
• /
• 2013

This study aims to carry out the final evaluation on the deterioration stability of dewaxing and strengthening treatments devised to conserve and restore the beeswax-treated volumes of the Annals of the Joseon Dynasty. Thus, this study artificially deteriorated dewaxed Hanji, strengthened Hanji and beeswax-treated Hanji with optimized processing conditions applied, and comparatively analyzed the deterioration characteristics of each kind of Hanji. As a result of this study, it turned out that there was the loss of physical strength and the value of $L^*$ was increased and the values of $a^*$ and $b^*$ were decreased from removing beeswax after dewaxing by supercritical fluid extraction (SFE). Also deteriorated strength during dewaxing was reinforced by strengthening treatment with methylcellulose and it showed higher strength than beeswax-treated Hanji. From the evaluation on deterioration stability after dewaxing and strengthening, it turned out that deterioration stability of strengthened Hanji is the superior. Therefore, it is presumed that conservation of aged beeswax-treated Hanji can be improved and extended when dewaxing and strengthening are applied under optimum conditions.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.50-57
• /
• 2012

In this study, the beeswax extraction methods using organic solvents were examined to develop a optimal dewaxing technology for beeswax-treated Hanji. Thermally-aged beeswax-treated Hanji was dewaxed using four types of extraction methods including dipping, Soxhlet extraction, ultrasonic washing and shaking methods. Then, the aging stability of the dewaxed Hanji was evaluated in terms of variations in paper strength and in the color of the printed area with muk. The experimental results suggested that the dewaxing methods allowing solvent to flow during extraction showed superior extraction efficiency. The dipping method in which the organic solvent does not flow showed the slowest extraction rate of beeswax compared to three other methods. In terms of variations in tensile strength and folding endurance, however, no obvious differences in the aging stability were observed amongst these four extraction methods. Regarding the aging stability in terms of the color of the printed area with muk, Soxhlet extraction method showed the best performance of dewaxing.

• 펄프종이기술
• /
• 제45권5호
• /
• pp.64-70
• /
• 2013

In this study, the effect of soxhlet extraction on dewaxing of the aged beeswax-treated paper was examined. To do this, soxhlet extraction of the aged beeswax-treated paper performed with different reflux conditions and then measured the dewaxing efficiency and change in the various properties such as tensile strength, folding endurance, color and brightness. Also, an artificial aging test was executed in order to investigate the effect of soxhlet extraction on the preservability of the dewaxed paper. As the result of FT-IR analysis, a peak area of CH and COOH group, which are main band of beeswax, was decreased or removed after soxhlet extraction. The decreasing rate of each peaks were increased depending on reflux time. After dewaxing, the physical property such as MIT type folding endurance and tensile strength was decreased. And $L^*$ value and brightness were increased while $a^*$ and $b^*$ value were decreased due to the remove of color compounds in beeswax. The more color deviation (${\Delta}E$) is expected with higher reflux times. As the result of artificial aging, preservability of two dewaxed papers except of DP_SE(C) sample was higher than that of untreated paper i.e. beeswax-treated paper.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.81-82
• /
• 2008

• 한국식품과학회지
• /
• 제11권2호
• /
• pp.112-117
• /
• 1979

해바라기유의 재래식 탈납공정 경제성을 높이기 위해서 여러가지 유화제(0.2% sodium bexametaphosphate, 0.05% sodium lauryl sulfate, 0.001% dioctyl sodium sulfosuccinate)를 이용한 새로운 탈납공정을 개발하였다. 해바라기 원유를 회분식 (batch process)과 연속식(continuous process)으로 유화제 수용액과 유화시킨후 원심분리기로 분리시켰을 때 재래식 탈납공정에 비견할 만한 탈납을 할 수있음을 알았다. 탈납 공정에서 위에 설명한 탈납정도(degree of dewaxing)외에 또 하나의 중요인자는 수율(dewaxirg loss)인바 회분식 공정의 경우에는 재래식 탈납공정의 수율과 같았으나 연속식 공정의 경우에는 개량할 여지가 있음을 알았다. 실험결과에 의하면 회분식 공정의 경우 탈납전 원유에 함유된 납(wax)의 다과에 관계없이 수율은 $0.62{\sim}0.82%$로 재래식 공정과 같았으나 연속식 공정인 경우에는 탈납전 원유에 함유된 납의 양이 적은 경우와 많은 경우 각각 2.28%와 5.68%로 현격한 차이를 보였다. 또한 연속식 공정의 경우 원유와 유화제를 유화시키는 방법에 따라 수율에 많은 영향이 미치는 것으로 밝혀졌으며 contactor와 static mixer를 썼을때 각각 5.2%와 2.8%이었다.

• 대한화학회지
• /
• 제11권1호
• /
• pp.17-21
• /
• 1967

For utilization of Bunker-C residual oil produced at KOCO., the auther tested the properties of vacuum fraction and blown asphalt, and as the result of it, (1) Vacuum fraction had so broad range of viscosity and high flash point that could be produced all kind of lublicating oil, but had to be dewaxed for high pour point, (2) Urea dewaxing was suitable to lighter fraction but not to heavier fraction, so, for heavier fraction, solvent dewaxing was needed. (3) Blown asphalt produced from vacuum residue had uniform relation between softening point and penetration in spite of broad change of blowing condition and adding of catalyst.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.58-66
• /
• 2010

The Annals of beeswax applied-Joseon Dynasty have some serious damages such as cracks, brown, red or black spots, and discolorations by chemical and biological degradation, but others without any beeswax application have still been keeping good quality during over several hundred years. It would be convinced that the beeswax applied in the Annals resulted in these deteriorations. Therefore, in order to focus on the aging mechanism and conservation techniques for the beeswax-applied Annals of Joseon Dynasty, the beeswax applying and dewaxing techniques of Hanji were tried by auto bar coater with a hot plate, and by heat-pressure sensitive extracting treatments. The ageing behaviors of beeswaxed Hanji and dewaxed Hanji were investigated by measuring the changes of physical, optical, morphological, and chemical properties, through accelerated ageing treatment in dry oven at $150^{\circ}C$ during 48 hours. Consequently, the ageing actions of beeswaxed Hanji were even faster than that of Hanji. The optimum dewaxed amounts from beeswaxed Hanji was also obtained in pressure of $40\;kg_f$ under heating conditions.