• 설비공학논문집
• /
• 제13권11호
• /
• pp.1089-1096
• /
• 2001

The cool-down performance after soaking is very important in an automotive air-conditioning system and is considered as the key design variable. Therefore, understanding of the overall transient characteristics of the system is essential to the preliminary design as well as steady-state characteristics. The objective of this study is to develop a computer simulation model and estimate theoretical1y the transient performance of an automotive air-conditioning system. To accomplish this, a mathematical modelling of each component, such as compressor, condenser, expansion valve, and evaporator, is presented first of all. For a detailed calculation, condenser and evaporator are divided into many subsections. Each sub-section is an elemental volume for modelling. In models of expansion valve and compressor, dynamic behaviors are not considered in an attempt to simplify the ana1ysis, but the quasi-static ones are just considered, such as the relation between mass flow rate and pressure drop in expansion device, polytropic process in compressor, etc. The developed simulation model is validated with a comparison to laboratory test data of an automotive air-conditioning system. The overall time-tracing properties of each component agreed fairly well wish those of test data in this case.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.240-244
• /
• 2002

Mathematical and numerical modelling is proposed to evaluate the horizontal behavior of a wave-driven upwelling device and then, the horizontal behavior and the structural ability are inspected for the regular and irregular waves in East sea. Analysis results indicate that the buoy moves with the water particle and the pipe behaves cantilever beam. Also, it is found that the strength of pipe is sufficient to resist the internal moment

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.852-860
• /
• 2010

An environment in which the software is operated become more complex and changed dynamically. Such software requires the ability to adapt in accordance with operating environments, by monitoring the changes of user requirements and operating environments. Especially, the mobile device used in military operation requires more dynamical adaptation than the mobile device in normal environment. In this paper, we propose MOSAIC architecture based on Self-Adaptive Software suitable for military mobile device and verify the results. The proposed architecture consists of context manager, evaluation manager and adaptation manager. We simulate the MOSAIC architecture by modelling PRE(Position Reporting Equipment) used in the army and verify four types of operational mode and dynamical reconfiguration of user interface.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.1-6
• /
• 2010

Direct Drive Valves (DDV) with electric closed loop spool position control are suitable for electrohydraulic position, velocity, pressure or force control systems including those with high dynamic response requirements. The spool drive device is a permanent magnet linear force motor which can actively stroke the spool from its spring centered position in both directions. This basic study is carried out to drive the design parameters for developing a domestic DDV. The static and dynamic characteristics of DDV are examined. The simulation results are compared with data of manufacture's catalog to show the validity of the modelling.

• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.229-240
• /
• 2019

The physical models are useful to understand the soil behaviour. Hence, these tools allow validating analytical theories and numerical data. This paper addresses the design, construction and implementation of a physical model able to simulate the soil liquefaction under different cyclic actions. The model was instrumented with a piezoelectric actuator and a set of transducers to measure the porewater pressures, displacements and accelerations of the system. The soil liquefaction was assessed in three different grain size particles of a natural sand by applying a sinusoidal signal, which incorporated three amplitudes and the fundamental frequencies of three different earthquakes occurred in Colombia. In addition, such frequencies were scaled in a micro shaking table device for 1, 50 and 80 g. Tests allowed identifying the liquefaction susceptibility at various frequency and displacement amplitude combinations. Experimental evidence validated that the liquefaction susceptibility is higher in the fine-grained sands than coarse-grained sands, and showed that the acceleration of the actuator controls the phenomena trigging in the model instead of the displacement amplitude.

• Structural Engineering and Mechanics
• /
• 제18권4호
• /
• pp.475-491
• /
• 2004

Anchorage devices play an important role in post-tensioned bridge structures since they must sustain heavy loads in order to permit the transfer of the prestressing force to the structure. In external prestressing, the situation is even more critical since the anchorage mechanisms, with the deviators, are the only links between the structure and the tendons throughout the service life of the structure. The behaviour of anchorage devise may be studied by using the finite element method. To do so, each component of the anchorage must be adequately represented in order to approximate the anchor mechanism as accurately as possible. In particular, the modelling of the jaw/tendon device may be carried out using the real geometry of these two components with an appropriate constitutive contact law or by replacing these components by a single equivalent. This paper presents the numerical study of a mono-strand anchorage device. The results of a comparison between two different representations of the jaw/tendon device, either as two distinct components or as a single equivalent, will be examined. In the double-component setup, the influence of the wedge configuration composing the jaw, and the influence of lubrication of the anchor, will be assessed.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.390-399
• /
• 2013

As a result of the depletion of fossil fuels and environmental contamination, it has become important to use renewable energy. For the stable utilization of renewable energy sources, energy storage devices must be used. In addition, renewable and distributed power sources with energy storage devices must operate stably under grid-connected mode. This paper proposed dynamic response modeling for renewable power generation systems including a charger/discharger with an energy storage device in order to derive a method to guarantee stable operation while fully utilizing the energy from the energy storage device. In this paper, the principle operation and design guidelines of the proposed scheme are presented, along with a performance analysis and simulation results using MATLAB and PSIM. Finally, a hardware prototype of a 1kW power conditioning system with an energy storage device has been implemented for experimental verification of the proposed converter system.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.40-42
• /
• 2010

Unsteady CFD results of the backward facing step (BFS) flow field is reconstructed by the low-dimenstional modes using the POD (Proper Orthogonal Decomposition) technique. Flow responses to the blowing or suction with various frequencies and amplitudes applied at the edge of the BFS can also be analysed using the same technique. The present technique can be effectively applied to the feedback flow control device.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 추계학술대회논문집
• /
• pp.346-350
• /
• 1997

Index of performance is dervied from consideration of movement times in routine selection tasks. The discrete movement task employed in this study consisted of moving a cursor from the home position to targets located 6.8, 15.9, 25.0, and 34.0 cm. The target widths were 2.3, 4.5, and 6.8cm. Eight subjects with nomovement disabilities took part in the experiment. Fitts' law is found to be applicable in this experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2510-2512
• /
• 2002

In this paper, we investigated 2-DOF haptic device and the method of virtual environment modeling for virtual reality. We designed an modified five bar link system to improve the performance. The haptic control system is composed of calculating kinematics and statics, controlling actuator, and describing the virtual environment. Using this system, we realized the virtual spring model and the freely falling ball model.