• Journal of Korean Biological Nursing Science
• /
• v.15 no.3
• /
• pp.147-153
• /
• 2013

Purpose: This study was conducted in order to closely examine the effects on bone mineral density and health promotion behaviors following the intervention of a 20-week Thera band exercise program targeting elderly women. Methods: This study is a pseudo-experimental research with a pre-and-post design in a single group that examined the effects after the intervention of Thera Band Exercise for 20 weeks targeting 31 elderly women over 60 years of age who visit a Senior Welfare Center located in K city. It analyzed subjects' general characteristics using error and percentage, health promotion behavior, and a bone density aspect using the mean and standard deviation, as well as a change in the health promotion behavior and bone density, before and after exercise with Paired t-test by using the SPSS 18.0 program. Results: The effect of the Thera band exercise program on bone mineral density was reduced (t=8.140, p<.001) gradually after 20 weeks of exercise compared to the pre-exercise period. The health promotion behavior before and after exercise showed the significantly increasing outcomes (t=3.26, p=.003). Conclusion: There is a limitation to a direct rise in bone mineral density with the use of Thera band exercise intervention in the elderly. A change in health promotion behavior before and after exercise increased significantly. Thus, it was confirmed that taking exercise leads to a gradual rise in health promotion behavior. Hence, it understood that continuous exercise is useful and brings about a positive change in promoting health maintenance in elderly women.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1950-1956
• /
• 1997

An engineering goal in vibration and noise professionals is to develope quiet machines at the preliminary design stage, and various numerical techniques such as FEM, SEA or BEM are one of the schemes toward the goal. In this paper, the research has been focused on the sensitivity effect of mesh sizes for FEM application so that the optimum size of the mesh that leads to engineering solution within acceptable computing time could be generated. In order to evaluate the mesh size effect, three important parameters have been examined : natural frequencies, number of modes and driving point mobility. First, several lower modes including the fundamental frequency of a 2-D plate structure have been calculated as mesh size changes. Since theoretical values of natural frequencies for a simple structure are known, the deviation between the numerical and theoretical values is obtained as a function of mesh size. The result shows that the error is no longer decreased if the mesh size becomes a quarter wavelength or smaller than that. Second, the mesh size effect is also investigated for the number of modes. For the frequency band up to 1.4 kHz, the structure should have 38 modes in total. As the mesh size reaches to the quarter wavelength, the total count in modes approaches to the same values. Third, a mobility function at the driving point is compared between SEA and FEM result. In SEA application, the mobility function is determined by the modal density and the mass of the structure. It is independent of excitation frequencies. When the mobility function is calculated from a wavelength to one-tenth of it, the mobility becomes constant if the mesh becomes a quarter wavelength or smaller. We can conclude that dynamic parameters, such as eigenvalues, mode count, and mobility function, can be correctly estimated, while saving the computing burden, if a quarter wavelength (.lambda./4) mesh is used. Therefore, (.lambda./4) mesh is recommended in structural vibration analysis.

• Wind and Structures
• /
• v.24 no.2
• /
• pp.95-118
• /
• 2017

The present study revealed comparison the pressure distribution on the surfaces of regular cross plan shaped building with angular cross plan shaped building which is being transformed from basic cross plan shaped building through the variation of internal angles between limbs by $15^{\circ}$ for various wind incidence angle from $0^{\circ}$ to $180^{\circ}$ at an interval of $30^{\circ}$. In order to maintain the area same the limbs sizes are slightly increased accordingly. Numerical analysis has been carried out to generate similar nature of flow condition as per IS: 875 (Part -III):1987 (a mean wind velocity of 10 m/s) by using computational fluid dynamics (CFD) with help of ANSYS CFX ($k-{\varepsilon}$ model). The variation of mean pressure coefficients, pressure distribution over the surface, flow pattern and force coefficient are evaluated for each cases and represented graphically to understand extent of nonconformities due to such angular modifications in plan. Finally regular cross shaped building results are compared with wind tunnel results obtained from similar '+' shaped building study with similar flow condition. Reduction in along wind force coefficients for angular crossed shaped building, observed for various skew angles leads to develop lesser along wind force on building compared to regular crossed shaped building and square plan shaped building. Interference effect within the internal faces are observed in particular faces of building for both cases, considerably. Significant deviation is noticed in wind induced responses for angular cross building compared to regular cross shaped building for different direction wind flow.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.139-144
• /
• 2019

For recent decades, Non-volatile Memory (NVM) technologies have been drawing a high attention both in industry and academia due to its high density and short latency comparable to that of DRAM. However, NVM devices has write endurance problem and thus the current data structures that have been built around DRAM-specific features including unlimited program cycles is inadequate for NVM, reducing the device lifetime significantly. In this paper, we revisit a red-black tree extensively adopted for data indexing across a wide range of applications, and make it to better fit for NVM. Specifically, we observe that the conventional red-black tree wears out the specific location of memory because of its rebalancing operation to ensure fast access time over a whole dataset. However, this rebalancing operation frequently updates the long-lived nodes, which leads to the skewed wear out across the NVM cells. To resolve this problem, we present a new swapping wear-leveling red-black tree that periodically moves data in the worn-out node into the young node. The performance study with real-world traces demonstrates the proposed red-black tree reduces the standard deviation of the write count across nodes by up to 12.5%.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3333-3340
• /
• 2010

A three dimensional pharmacophore model was generated for the molecules which are responsible for anti-inflammatory activities targeting Interleukin-2 inducible tyrosine kinase (Itk). 16 structurally diverse molecules were selected as training set to generate the hypotheses using Discovery Studio v2.1. The best hypothesis, Hypo1, comprises two hydrogen bond acceptor (HBA), one hydrophobic aromatic (HA), one ring aromatic (RA) and shows high cost difference (63.71), high correlation coefficient (0.97) as well as low RMS deviation (0.81). Hypo1 has been further validated toward a test set, decoy set and Fischer's randomization method. Furthermore, Hypo1 was used to screen NCI and Maybridge databases. Finally, 2 hit molecules were identified as potential leads against Itk, which may be useful for future drug development.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.51-55
• /
• 2019

The loss of safety for reservoirs brought about by climate change and facility aging leads to reservoir failures, which results in the loss of lives and property damage in downstream areas. Therefore, it is necessary to provide a Reservoir Failure Forecasting System for downstream residents to detect the early signs of failure (with sensors) in real-time and perform safety management to prevent and minimize possible damage. For the verification of established water level management criteria, 10 water level data up to reservoir capacity was selected. Weight factor and trend line were applied to dramatic increase section of water level in the 1 year period data. The results shows that water level criteria based on three even parts shows less than 7% of standard deviation and it is appropriate to verify management criteria.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.49-56
• /
• 2014

This thesis proposes CBIRS/TB method that uses a tablet's color distribution information and form distinctive in content-based search. CBIRS/TB can avoid misuses and improper tablet uses by conducting content-based search in commonly prescribed tablets. The existing FE-CBIRS system is limited to recognizing only the image of color and shape of the tablet, that leads to applying insufficient form-specific information. While CBIRS/TB utilizes average, standard deviation, hue and saturation of each tablets in color, brightness, and contrast, FE-CBIRS has partial-sphere application problem; only applying the typical color of the tablet. Also, in case of the shape-specific-information, Invariant Moment is mainly used for the extracted partial-spheres. This causes delayed processing time and accuracy problems. Therefore, to improve this setback, this thesis indexed color-specific-information of the extracted images into categorized classification for improved search speed and accuracy.

• Journal of Science Education
• /
• v.32 no.1
• /
• pp.1-18
• /
• 2008

We investigated 8th grade science textbooks and their instructor's manuals treating the ideal condition for isochronism of a simple pendulum. The isochronism, i.e. the period is independent of amplitude, is satisfied only if the amplitude is very small. This is so called "ideal condition" for isochronism of a simple pendulum. Most textbooks and instructor's manuals are found not to state this ideal condition properly, which often leads to the deviation between experimental data and theoretical calculation. This difference between theoretical and experimental results makes students to create a sense of alienation from the real world and eventually keeps them away from physics. We thus study the cycloidal pendulum as an alternative method to test the isochronism regardless of amplitude and discuss the practical utility of it in class.

• Women's Health Nursing
• /
• v.3 no.2
• /
• pp.192-207
• /
• 1997

This study aims at examining relationships between perceived body shape, body image and health complaints among 88 women registered at a facility for managing body shape, which leads to adequate management of obesity in women for healthy lives. The survey was conducted by using a questionnaire consisted of 12 items of general characteristics and interests for weight control, 47 items of body image, and 57 items of Cornell Medical Index(CMI). The data were analyzed by using mean standard deviation, ANOVA, and Pearson correlation coefficient. The results are following. 1. The means of age, body weight, height of the women were 27.02 years, 56.02 years, 56.03kg, 161.71cm, respectively. The level of obesity by body shape was 47.7% for standard type, 26.2% for slim type, 26.1% for fat type. Those women graduated from high school or higher education institutions were 97.7%. 2. More than 70% of the subjects perceived their weight as overweight, while 26.1% of the women were fat according to the level of obesity. Ninety percent of the subjects were not satisfied with their body shape. 3. Body weight increased most during middle and high school days. The women became interested in weight control through talks with friends(35.2%), influence of mass communication(34.1%), and social custom(22.7%). As to the method of weight control, subject's own judgement(54.5%) revealed highest percentage, whereas only 20% of the subjects adopted prescriptions of experts for weight control or of doctors. Those who had side reactions from weight control were 30.7%. High percentages of the women reported the decrease the amount of eating(54.5%), the increase the amount of exercise(27.3%) as the effective methods of weight control. 4. The score of body image differed significantly by the perceived body shape : the score was highest in the perceived standard type. 5. The level of health complaints did not differ by the perceived body shape. In relation to the level of obesity, physical health complaints were high in the groups of very slim type and of very fat type, while mental health complaints were high in the groups of very slim type and of fat type. 6. Very high correlations were observed between the perceived body shape and body image and between physical health complaints and mental health complaints.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.26-32
• /
• 2005

A tooth impaction means a state that a tooth does not erupt out of oral mucosa or alveolar bone for many reasons. The reasons for an impaction of the Maxillary central incisor are an odontoma, supernumerary tooth, space loss, prolonged remaining or early loss of a preceding deciduous tooth, abnormalities of crown or root caused by trauma of a deciduous tooth and an ectopic position of a tooth germ. In the case of the impacted maxillary incisor, a rapid mesial movement of a lateral incisor leads a space loss and a midline deviation can be happened. Furthermore, it can cause a cyst. When we treated a patient with an impacted central incisor early, we could see a better prognosis. It means an early diagnosis and an exact treatment are very important. Generally if the impaction is not severe or it is caused by a keratinized covering tissue, a surgical exposure can induce an eruption easily but an orthodontic force is recommended when an eruption does not happen after a surgical method, when the eruption path is too transpositioned to be corrected spontaneously and when an impacted tooth is located so deeply. In the treatment using an orthodontic force, careful considerations about a root length, pulp, and a periodontal tissue can improve the periodontal and esthetic prognosis for the long follow-up results. This case is using an orthodontic traction following a periodic observation and in no expectation of spontaneous eruption. After treatment of this case, I have got some knowledges, so I report this case.