• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.5-10
• /
• 1998

Mullitization in a multicomponent oxide system(alumina-kaolin-quartz-feldspar-talc) was studied as a function of sintering temperature from 1200 to 1500$^{\circ}C$ based upon a quantitative X-ray diffraction analysis. In the present study mullite grew as wiskers and its formation reaction showed characteristic there stages as follows In the first stage(1255-1295$^{\circ}C$) an appreciable mullitization(nucleation) occurred while corun-dum dissolution into glass (increasing glass content ) limited the rate of the reaction. At 1295-1335$^{\circ}C$ (second state) the reaction was significantly enhanced with a considerable glass consumption and with no appreciable change in corundum content. Finally (above 1335$^{\circ}C$) the reaction rate was attenuated re-markably with an apparent decrease in glass consumption rate. The impingement of mullite whiskers by oth-er whiskers and crystals was speculated to cause mullite growth in thickness direction with a slow growth rate resulting in the diminished reaction rate in the final stage.

• 한국전자파학회논문지
• /
• 제28권11호
• /
• pp.853-864
• /
• 2017

본 논문에서는 지상 클러터 환경에서 고속으로 접근하는 소형 표적을 정밀 감지하기 위한 오경보율 감소기법을 제안한다. CFAR 알고리즘은 균일한 잡음 환경에서는 효과적이지만, 클러터가 존재하는 비균일한 잡음 환경에서는 표적을 구별하기가 쉽지 않다. 특히 클러터 세기가 표적신호레벨과 큰 차이가 없을 때에는 높은 오경보율 때문에 표적을 정밀하게 감지하기가 어렵다. 이러한 어려움을 해결하기 위해 본 연구에서는 CFAR 알고리즘과 정합 처리, 이진누적기법에 기반한 오경보율 감소기법을 제안한다. 각 기법의 이론적 분석을 통해 매개변수를 연구하고, 시험결과를 제시함으로써 제안하는 연구의 타당성을 검증한다.

• 한국동물생명공학회지
• /
• 제36권2호
• /
• pp.82-90
• /
• 2021

In the present study, we examined if deep uterine artificial insemination (DUAI) can improve the pregnancy rate of artificial insemination (AI) using epididymal spermatozoa (ES) in Hanwoo cattle. The estrus cycles of 88 Hanwoo cows were synchronized, and 17 cows were artificially inseminated using the DUAI method with ES, 20 cows were artificially inseminated via the uterine body (BUAI) method with ES, and as a control, 51 cows were inseminated by using the BUAI method with ejaculated spermatozoa from 1 proven bull after frozen thawing. The pregnancy rate of the DUAI method (58.8%) was higher than that of the BUAI method (25.0%, p = 0.0498). The motility of ES was examined immediately after thawing and after 3 and 6 h of incubation. The rapid progressive sperm motility of the control group was significantly higher than that of the ES group immediately after thawing and after 3 and 6 h of incubation (p < 0.05). The straight line velocity and average path velocity of the ES group after 6 h of incubation were significantly lower than those in the control group (p < 0.05). The linearity and amplitude of lateral head of ES were lower than those at 6 h (p < 0.05). The flagellar beat cross frequency and hyperactivation of ES were lower than the control spermatozoa immediately after thawing and at 3 h (p < 0.05). These motility parameters suggested that ES had a low motility and fertilization ability compared to the control spermatozoa. After frozen-thawing and 3 h of incubation, the percentage of live spermatozoa with intact acrosomes in the ES was significantly lower than that in ejaculated spermatozoa (p < 0.05). Our findings suggested that the DUAI method can overcome the low pregnancy rate of ES, despite the low motility, viability, and fertilization ability of ES.

• 한국양식학회지
• /
• 제22권1호
• /
• pp.1-4
• /
• 2009

본 연구는 사료급이율이 여름철에 사육된 넙치 성어의 성장 및 체조성에 미치는 영향을 조사하고자 수행되었다. 최초 평균체중 535g의 실험어를 12개 수조(1.8톤)에 15마리씩 사료급이율 별 3반복으로 수용하여, 1일 2회 실험사료를 급이하며 10주간 사육하였다. 사료급이율은 만복(100%), 만복의 90%, 80%, 70%(어체중에 대한 일일 사료섭취율 기준)로 설정하였다. 사육기간 동안의 평균수온은 $19.2{\pm}2.8^{\circ}C$였다. 사육실험 후, 증체율, 일일사료섭취율 및 비만도는 사료급이율에 따라 유의한 차이를 보였으나, 생존률 및 사료효율은 모든 실험구간에 차이가 없었다. 증체율과 어체의 비만도는 일일 사료급이율이 증가함에 따라 증가하였으며, 만복의 90% 급이구는 만복 급이구와 유의한 차이가 없었으나, 80% 및 70% 급이구는 만복 급이구에 비하여 낮은 결과를 보였다. 실험 종료시, 실험어의 등근육과 간의 일반성분은 실험구간에 특별한 변화경향을 보이지 않았다. 본 연구의 증체율 및 비만도 결과로 볼 때, 여름철에 넙치 성어(535-928 g)의 적정 성장 및 비만도 유지를 위해서는 만복의 90%로 사료를 급이 하여도 좋을 것으로 판단된다.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.85-92
• /
• 2013

This work is concerned with an evaluation of dynamic boric acid corrosion (BAC) of low alloy steel for reactor pressure vessel of a pressurized water reactor (PWR). Mockup test method was newly established to investigate dynamic BAC of the low alloy steel under various conditions simulating a primary water leakage incident. The average corrosion rate was measured from the weight loss of the low alloy steel specimen, and the maximum corrosion rate was obtained by the surface profilometry after the mockup test. The corrosion rates increased with the rise of the leakage rate of the primary water containing boric acid, and the presence of oxygen dissolved in the primary water also accelerated the corrosion. From the specimen surface analysis, it was found that typical flow-accelerated corrosion and jet-impingement occurred under two-phase fluid of water droplet and steam environment. The maximum corrosion rate was determined as 5.97 mm/year at the leakage rate of 20 cc/min of the primary water with a saturated content of oxygen within the range of experimental condition of this work.

• Clinical and Experimental Reproductive Medicine
• /
• 제30권1호
• /
• pp.105-109
• /
• 2003

Objective s: To assess the fertilizing capacity using sperm penetration assay (SPA) to predict the outcome of the in vitro fertilization-embryo transfer (IVF-ET) outcome. Materials and Methods: Semen samples were provided by 129 patients undergoing IVF. We attempted to correlate the extent of sperm penetration under enhanced SPA protocol with the results of fertilization, cleavage, preimplantation embryo development, and pregnancy. Results: Univariate analysis demonstrated a statistically significant correlation between fertilizing capacity and motility, kinetics, fertilization, cleavage and embryo development, and pregnancy rate. By logistic regression analysis, fertilizing capacity was found to be the only variable that was statistically significant with respect to pregnancy rate. Fertilizing capacity, cleavage rate and pregnant rate were significantly higher in pregnant group. However, the fertilization rates was comparable with both group. Conclusions: Lower fertilizing capacity could denote a poorer prognosis for establishing a pregnancy, even after satisfactory fertilization rate is achieved.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1486-1496
• /
• 2000

The initial flame kernel development and flame propagation in a constant volume combustion chamber is analyzed by the heat release rate and the mass fraction burnt. The combustion pressure is measured with a piezoelectric type pressure sensor. In order to evaluate the effects of ignition system and ignition energy on the flame propagation, four different ignition systems are designed and tested, and the ignition energy is varied by the dwell time. Several different spark plugs are also tested and examined to analysis the effects of electrodes on flame kernel development. The results show that the when the dwell time is increased, and when the spark plug gap is extended, heat release rate and the mass burnt fraction are increased. The materials and shapes of electrodes affect the flame development, because they change the energy transfer efficiency from electrical energy to chemical energy. The diameter of electrodes influences not only the heat release rate but also the mass burnt fraction as well.

• 정보관리학회지
• /
• 제32권1호
• /
• pp.43-62
• /
• 2015

본 연구는 국내 공공도서관에서 장서개발정책 수립 시에 활용할 수 있는 다양한 장서평가 지표를 제시할 목적으로 수행되었다. 이러한 탐색적 연구를 위하여 공공도서관의 실제 데이터를 개별 장서평가 지표에 적용하는 사례연구를 통해서 그 활용 가능성을 확인하고자 하였다. 장서평가 지표 분석을 위하여 서울시 광진구립도서관의 최근 10년간 장서대출 데이터가 이용되었다. 주요 장서평가 지표로는 연도별 구입도서의 장서회전율과 이용계수, 연도별 사서 추천도서 장서회전율과 이용계수, 연도별 비대출도서 비율, 대출자 거주지별 도서관 이용도 등이 분석되었다.

• 한국추진공학회지
• /
• 제26권4호
• /
• pp.44-53
• /
• 2022

추력조절이 가능한 고체추진기관에서 감압률은 추력중단 성능에 가장 큰 영향을 미치는 인자이다. 본 연구에서는 몇 종류의 추진기관에서 구현 가능한 감압률의 범위를 파악하였으며 이를 통하여 추진기관 감압률에 미치는 주요 인자를 도출하였다. 추진제에 대한 소화특성 파악뿐만 아니라 추진기관의 목표성능을 만족할 수 있는 감압률을 파악하는 것이 실제 추력조절 시스템 설계에 중요하며 본 연구에서와 같은 감압률 모델획득 방법론은 추력중단이 필요한 고체추진기관 설계에 적용 가능할 것으로 판단된다.

• Clinical and Experimental Reproductive Medicine
• /
• 제17권2호
• /
• pp.167-172
• /
• 1990

This study was carried out to clarify the effects of various kinds of cryoprotectants which were frequently used in freezing embryos of domestic animals on the survival of frozen-thawed mouse embryos. Mouse embryos were collected by hyperstimulation induction of ICR mouse. The samples were slowly cooled ($l^{\circ}C/min$) to temperatures between $-7^{\circ}C$ and $-30^{circ}C$ before direct transfer to liquid nitrogen ($-196^{\circ}C$) and thawed rapidly ($-500^{\circ}C$/min). As cryoprotectants, Glycerol, DMSO, Ethylene glycol and Propylene glycol were used and applied each 2 cell, 8 cell, morula in embryo stage. After normal mouse embryos developed to blastocyst by in vitro culture, we observed recovery rate and developing rate of embryos at thawing. The results obtained in these experiments were as follows : 1. The in vitro development rate from the frozen-thawed 2 cell embryos to the blastocyst were 67.7% in ethylene glycol, 65.7% in Propylene glycol, 55.2% in glycerol and 50.0% in DMSO respectively. 2. The in vitro development rate from the frozen-thawed 8 cell embryos to the blastocyst were 83.6% in DMSO, 75.7% in glycerol, 52.2% in propylene glycol respectively. 3. The in vitro development rate from the frozen-thawed morula to the blastocyst were 84.2% in glycerol, 80.0% in DMSO, 66.6% in propylene glycol and 55.2% in ethylene glycol respectively.