• Environmental Analysis Health and Toxicology
• /
• v.27
• /
• pp.12.1-12.8
• /
• 2012

Objectives: The aim of this study was to identify the health and environmental risk factors of air contaminants that influence environmental and respiratory diseases in Gyeongju, Pohang and Ulsan in South Korea, with a focus on volatile organic compounds (VOCs). Methods: Samples were collected by instantaneous negative pressure by opening the injection valve in the canister at a fixed height of 1 to 1.5 m. The sample that was condensed in $-150^{\circ}C$ was heated to $180^{\circ}C$ in sample pre-concentration trap using a 6-port switching valve and it was injected to a gas chromatography column. The injection quantity of samples was precisely controlled using an electronic flow controller equipped in the gas chromatography-mass spectrometer. Results: The quantity of the VOC emissions in the industrial area was 1.5 to 2 times higher than that in the non-industrial area. With regards to the aromatic hydrocarbons, toluene was detected at the highest level of 22.01 ppb in Ulsan, and chloroform was the halogenated hydrocarbons with the highest level of 10.19 ppb in Pohang. The emission of toluene was shown to be very important, as it accounted for more than 30% of the total aromatic hydrocarbon concentration. Conclusions: It was considered that benzene in terms of the cancer-causing grade standard, toluene in terms of the emission quantity, and chloroform and styrene in terms of their grades and emission quantities should be selected for priority measurement substances.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.87-95
• /
• 2016

In this study, we develop a model of an open center and load-sensing system and for a main control valve to analyze system characteristics and efficiency using SimulationX. In order to analyze the operating characteristics of the pressure and flow of the main control valve of an open center system, a test was performed at each port. The reliability of the model was confirmed by comparing the similarity of the analysis results with the test results before analyzing the operating characteristics of the system. Development of the load sensing main control valve was performed by adding a flow sharing valve and a notched shape to the open center system based on it's the proven reliability. The authors performed the simulation under the same load conditions in order to compare the efficiency of the systems. Additionally, the combined operation performance was investigated by means of analyzing the characteristics of flow distribution under different load conditions.

• Korean Institute of Interior Design Journal
• /
• v.22 no.3
• /
• pp.164-173
• /
• 2013

This study starts from the genealogical analysis of the urban public spaces through local history of Seoul which is significantly different from western countries. The analysis targets the discourse on the urban street, the basic unit of urban tissue and the settlement condition in urban life, which defines urban space-structure among the urban public spaces. And this research classifies and categorizes the value recognition and policy value occurred each period. Based on these, this research defines the progress levels of urban public design policy in Seoul as follows. Results Firstly, 1890's and 1900's was the period of development in commerce and industry, which caused congested and crowded streets. The open port policy allowed the experience of the foreign circumstance, and thus the identity of the urban streets and the value of symbolism come to realize among the society. During the Japanese colonization, urban streets put on modernized images through the urban remodeling out of the context according to the colonization policy. The brand-new values such as publicness and amenity are injected as well as modern regulations by system and authority. From Liberation to 1950's, it performed only street restoration as a repair from war with Japanese colonial system because of the political confusion and administrative vacuum. Finally, each period can be defined as follows. 1890's and 1900's can be defined as 'spontaneous finding the modernization' because urban street was intentionally transformed by the empire. Period of the Japanese colonization can be defined as 'the formation of modernized urban street concept and the compulsion of modernized regulation.' And period of from Liberation to 1950's, can be called as 'the absence of value recognition and maintenance of colonial system.' methodology.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.783-788
• /
• 2021

Although the Korean government (Ministry of Ocean and Fisheries) and related organizations are enforcing many policies to improve the marine safety of vessels with weak safety management, the effectiveness of each policy is deficient due to the lack of a risk assessment method for ship safety management. Most previous studies in Korea of the risk assessment of ships only dealt with fragmentary risks of individual marine accident risks, so a new assessment method for comprehensive marine accident risk is needed. Examples of comprehensive risk assessments for ship safety management are the selection method for inspection targets by the Port State Control and the Norwegian Maritime Authority. In this study, indicators for the comprehensive risk assessment of ship safety management were developed for and applied to coastal/offshore fishing vessels that occupy a high proportion of the registrations and marine accidents in Korea. As a result, the risk of each ship was confirmed quantitatively, and a ranking of the weakness factors for ship safety management was identified.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.1
• /
• pp.61-74
• /
• 2002

The purpose of this study is to propose vegetation management devices through analyzing the actual vegetation, flora, plant community structure and soil chemical concentrations in Weolmi urban nature park, Incheon. The actual vegetation of Weolmi Park in various areas is composed of urbanization area(2 types, 25.9%), landscape planting area(4 types, 16.1%), grass and marsh area(5 types, 7.6%) and mountain forest areal(14 types, 50.4%). The flora is composed of 295 taxa with 80 families, 253 species, 35 varieties and 7 formas, and among them there are 16 naturalized plant families, 39 species, 3 varieties. In reflection of size, the number of the species seems high but most of the them are under influence of human disturbance. Nine survey plots of plant community structure are classified into two groups. One is the semi-natural plant community(Prunus sargentii-Acer palmatum, Quercus accutissma-Prunus sargentii, Quercus serrata-Quercus accutissma-Prunus sargentii, Prunus sargentii, and Zelkova serrata-Prunus sargentii) that migrated finn the planting forest to the natural forest and the other is planting forest(Pinus koraienssis-Pinus thunbergii-Abies holophylla-Chamaectparis obtusa, Prunus sargentii, Pinus thunbergii-Alnus firma, Zelkova serrata). The average pH is 4.65 which means the soil acidity is quite high. The concentration of K, Ca, Mg and base saturation is very low. It seems that the environmental pollutants from Incheon Port and industrial plants near by survey site and long-distance transport of air pollutants from China made the soil condition worse. On the basis of the results above, six vegetation management devices are suggested: 1) removing the hazard plants(Pueraia thunbergiana and Humulus japonica), 2) natural landscape management of the middle and long term, 3) increasing species diversity, 4) Robinia pseudoacacia management, 5) keeping the naturalized plants from being distributed any further inside the mountain forest, 6) improving soil acidification.

• The Korean Journal of Ecology
• /
• v.24 no.3
• /
• pp.149-156
• /
• 2001

Zostera caespitosa Miki has been identified to be distributed along the seacoasts of Korea and Japan. This study was intended to clarify the morphological characters and the habitat characteristics of Korean Z. caespitosa. It was confirmed that Z. caespitosa is distributed along the seacoasts of South, Yellow and East Seas of South Korea. The habitats were located in the bay and port with the depth varying from 2.5 to 5.2 m. The habitats of Z. caespitosa were rather deeper than that of mixed bed with Z. marina. The sediment in the habitats was composed of well-sorted fine sand or muddy sand. Z. caespitosa showed marked differences in several morphological characters among sites. Morphology of Z. caespitosa varied with water depths, grain size and organic contents of sediments. Flowering shoots occurred by water temperature of 6.0∼13.7℃ from January to early April.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.203-209
• /
• 2010

A compact ANSI/EIA 709.1 protocol analyzer system suited for maintenance of LonWorks network for safety management of underground facilities was developed and tested. The hardware is based on the TMS320LF2406A embedded system, and the software was designed using Visual C++6.0 under Windows XP environment. Connected to the LonWorks network the developed protocol analyzer decodes the raw packets and pass them to the master PC through USB port. Then on the PC the packets are processed and analyzed in various aspects and the key features that are essential to the maintenance of LonWorks network installed at underground facilities are displayed in a user-friendly format. Performance of the developed protocol analyzer was evaluated through a series of experiments, by measuring the speed of packet analysis and the error rate. The protocol analyzer proved to work reliably even under the increased bandwidth. However, more comprehensive tests under various underground environmental conditions are desired.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.326-336
• /
• 2018

Continuous measurement of nearshore waves around Korea over long period is very demanding to setup plans for prevention of disasters of port and coastal structures. In this respect, a new web-based system, termed as WINK, was established, which collects nearshore wave data from Korea Meteorological Agency (KMA), Korea Hydrographic and Oceanographic Agency (KHOA), and Ministry of Oceans and Fisheries (MOF) and provide them after quality control of the data. This paper describes technical aspects regarding collection and selection of the wave observation data, construction of wave hindcasting data, the methodology of quality control for the selected wave data, and overall process of building the web-based data providing system.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.167-174
• /
• 2011

This paper described the estimation methods of CO2 emission of vehicles. The important of energy and environment has emerged in the world, and the field of vehicle's development as well. CO2 was particularly the object of emission-regulation that caused of global warming. There are performance comparison methods by driving mileage, International Panel on Climate Change (IPCC) and chemical equation for the combustion of Octane. We took the measurement by getting data through OBD-II port from vehicle covered 5 km on road. We got the diagnosis information, specific mileage and fuel consumption in this experiment. We are able to expect similar CO2 emission by the methods in the normal speed driving. Also, we can make more realistic approach of CO2 emission by the method of estimation by IPCC and chemical equation for the combustion of Octane in rapid acceleration driving.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.349-356
• /
• 2013

The purpose of this study is to review and overcome the limits of the existing design wave model applied to such waters as those located inside bays or near islands where the impact of wind influenced waves are more dominant, due to the nature of topographic isolation, than the influence of direct waves coming from the open sea. Although the existing model for an inside bay design wave is excellent for considering wind factors and very adaptable to topographically complicated areas compared to other models, it is difficult to show the wave diffractions and reflections caused by large scale structures or topographic features in the region. The study examined the various methods capable of taking into account wave diffraction, the angle of wave reflection, and changes in water depth. As a result of applying the modified design wave model to the target situation (inside bay or near island areas), it was found that the reliability of the design wave height around marine structures was improved, compared to the existing models. Therefore, it is fair to predict that the new model could provide more accurate design waves in the design of marine structures.