• Journal of the Korean Institute of Navigation
• /
• v.19 no.2
• /
• pp.107-113
• /
• 1995

Since the most of the mal-functions in the industrial equipments controlled by processors have been occured by the Electrical Fast Transient(EFT), the International Electrotechnical Commision(IEC) prepare the dummy signal to test the immunity level of the equipments controlled by processors and recommend it for the measuring. In this paper, the defined dummy EFT signal by IEC are analyzed by the spectrum analyzer in the frequency domain and studied the developed countermeasuring parts. The new developed parts are consist of the feedthrough capacitors ( $C_y$ type ) in the input and materials with high permeaility which was wound or inserted in the second layer of the Power Cable in order to increase Common Mode inductance. And it is compared inserted Permalloy to material with high permeability increasing Common Mode inductance. We could gotten a excellent insertion loss on the wide band against EFT signal. Especially, we confirm that countermeasuring Power Cable have been an excellent dynamic characteristics in computer system above the 3.6Kv. This new parts could be effectively used for industrial, MIL, and medical equipments to reduce a mal-functions on the site. Furthermore, these parts also have a good characteristics for EMI countermeasuring over the 60MHz up to several GHz band, they are also expected to be used for all kind of EMS test with IEC801-2, 3, 5 and 6 on the power distributed line.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.198-202
• /
• 2008

많은 양의 유전자 정보가 유전공학의 발전과 Genome 프로젝트의 결과로 축적되고 있으며, 이러한 유전자 정보를 체계적으로 관리하고 가시화하기 위한 생물정보학 분야의 연구가 진행되고 있다. 기존의 많은 Genome Browser들이 완성된 형태의 툴로 서비스되고 있다. 이러한 툴들은 다목적의 많은 기능을 포함하고 있어 특정연구를 진행해야하는 연구자들은 너무 많은 정보로부터 원하는 것을 찾기 위해 시간과 노력이 필요하게 된다. 본 논문에서는 특정한 목적의 Gene 가시화 툴을 제작할 수 있는 Component Ware를 제안하고 이를 이용한 진화분석용 가시화 툴을 소개한다.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.49-56
• /
• 2018

Construction machinery is used to improve productivity in civil engineering work and construction work, and it is a lengthy operation, and consumes considerable fuel to cope with large loads. As a result, productivity and fuel consumption of the construction machine become the main deciding factors. In the hydraulic system of the excavator, the main control valve is the most critical position for control. The flow distribution for control performance is achieved by the metering orifice, that causes critical energy loss. To improve this, we propose a combination of a three port proportional pressure reducing valve and a poppet type flow control valve as an IMV to replace the existing spool type MCV. To validate the proposal, we analyze static characteristics by modeling mathematically, and analyze dynamic characteristics. Simulation using the AMESim software on the regeneration circuit of the boom cylinder up-down operation, verifies the energy-saving effect compared to the existing MCV when IMV is used.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.73-84
• /
• 2000

Shipping industry continues to face dramatic changes in its environment ranging from development in containerization, computerization and telecommunications to the emergence of global marketplace. Perhaps the most significant trend - representing both a threat and opportunity - is the increasingly competitive nature of shipping service market. In order for the shipping companies to cope with those improvements and challenges, they should analyze and clarify customer's DM(decision making) process for the purchase of container shipping service. The major research findings from the study were found as follows; 1) The degree of shipper's involvement in purchasing shipping services was found to be a discriminating variable affecting the information sources consisting of personal and non-personal information sources. 2) The positive relationship was found between the experiences on shipping services and non-personal information sources. 3) It was observed that as people had more experience searching for information, the more in depth their searches became. 4) There existed a positive relationship between knowledges on shipping services and information search. 5) According to the SEM analysis, the shipper's information search on shipping services was also found to have a great influence on the shipper's purchasing behavior. The shipper's search was resulted in positive customer satisfaction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.557-560
• /
• 2004

In this paper, wireless internet services are combined with conventional wire internet service system. These system support that instrument manager can be access his instrument by use personal mobile devices and instrument manager can be take emergency action by use mobile devices. for this, error signal of local instruments are transmitted to the serial port of local server through Rf wireless communication channel. Also, The image of local instruments are transmitted to the web monitoring screen of main server. Network Camera System Supports remote monitoring functions. The interfacing of nam server with external user are possible through the mobile devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1520-1524
• /
• 2004

This paper describes the development of a robotic maintenance system for use in a maintenance operation of the nozzle dam in a water chamber of a steam generator at the Kori nuclear power plant in Korea. The robotic maintenance system was designed to minimize the personnel exposure to a hazardous radioactive environment. This robotic maintenance system is operated by a teleoperated control which was designed to perform the nozzle dam maintenance tasks in a remote manner without endangering the human workers. Specific maintenance tasks involve the transportation, insertion, and removal of nozzle dams in a water chamber inside a steam generator via a narrow man-way entrance port. The developed robotic maintenance system has two major subsystems: a two degrees of freedom guiding device acting as the main guiding arm and a master-slave manipulator with a kinematic dissimilarity. The mechanical design considerations, control system, and capabilities of the robotic maintenance system are presented. Finally, a graphical representation of the nozzle dam maintenance processes in a simulated work environment are also demonstrated.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.303-314
• /
• 2010

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 49 kinds of the laboratory model tests were conducted. And the result the study suggested $\beta_s$, the stiffness coefficient to evaluate the stiffness effect of reinforcement materials. Then, it was also found that the stiffness coefficient, $\beta_s$ as the testing constant would be appropriate as high as 1.0, 1.1 and 1.5 for geotextile, geogrid and steel bar, respectively. And It was evaluated that the stiffness effect affecting reinforcement improvement effect would be reduced as the thickness of embeded depth increases and that RFe, the stiffness effect reduction coefficient would have positive correlation with H/B. Finally, it was confirmed that the bearing capacity gained from the method to calculate bearing capacity, which was suggested in the study, would almost correctly estimate the capacity, demonstrating the appropriateness of the proposed bearing capacity calculation method.

• Journal of ILASS-Korea
• /
• v.14 no.1
• /
• pp.34-38
• /
• 2009

This paper presents the pulsation of carburetor inlet and outlet pressure of a small SI gasoline engine. The engine used in this paper is a 23cc, single cylinder, diaphragm carburetor, two-stroke, air-cooled for brush cutter. The rpm and pressure wave pulsation at the inlet and the outlet of carburetor were measured and analysed for the understand of the internal air flow into the barrel on the diaphragm carburetor. These data should be used for the development of the duel fuel injection system for gasoline and LPG. The results showed that the carburetor inlet pressure variations were very steady, but the pressure variations at carburetor outlet were very sensitive to the pressure variation into the crank case and were to similar independently to the engine speed on partial opened throttle conditions. According to increasing engine speed, the pressure waves started to come out and be developed after closing the intake port of the engine at carburetor outlet. Reverse flow occurred on the WOT (wide open throttle) condition.

• Journal of Convergence Society for SMB
• /
• v.4 no.4
• /
• pp.13-18
• /
• 2014

The usage rate of user due to advances in smartphone development is higher than the usage rate to use a PC. However, smartphone usage popularized research to protect sensitive information, such as smart phone users personal information, financial information is a small state. In this paper, we analyzed the various vulnerabilities in smartphone studies to date have been looking into the corresponding port smart consumer dispute resolution methods and criteria for smartphone security attack methods and analysis. In particular, the threat of such a network, malware, Peep attack of the security threats arising from the smartphone they can avoid or mitigate threats to minimize the smartphone security damage is done to the disclosure of personal information, such as direct damage or financial loss the analysis of that method.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.139-146
• /
• 2006

In this paper vector code correlation(VCC) method and an algorithm to promote the image processing performance in building an effective measurement system using cameras are described for automatically berthing and controlling the ship equipped with side thrusters. In order to realize automatic ship berthing, it is indispensable that the berthing assistant system on the ship should continuously trace a target in the berth to measure the distance to the target and the ship attitude, such that we can make the ship move to the specified location. The considered system is made up of 4 apparatuses compounded from a CCD camera, a camera direction controller, a popular PC with a built in image processing board and a signal conversion unit connected to parallel port of the PC. The object of this paper is to reduce the image processing time so that the berthing system is able to ensure the safety schedule against risks during approaching to the berth. It could be achieved by composing the vector code image to utilize the gradient of an approximated plane found with the brightness of pixels forming a certain region in an image and verifying the effectiveness on a commonly used PC. From experimental results, it is clear that the proposed method can be applied to the measurement system for automatic ship berthing and has the image processing time of fourfold as compared with the typical template matching method.