• The Korean Journal of Pain
• /
• v.13 no.1
• /
• pp.38-43
• /
• 2000

Background: Preemptive analgesia may decrease postoperative pain by preventing nociceptive inputs generated during surgery. The preemptive effect of intravenous nalbuphine was examined in gynecological surgery. Methods: Forty female patients scheduled for gynecological surgery were randomly allocated into two groups. Each patient received 10 mg of intravenous nalbuphine as a bolus dose at the closure of peritoneum in group I (n=20) and before the skin incision in group II (n=20). After the bolus dose, the intravenous patient controlled analgesia (IV-PCA) which contained 50 mg of nalbuphine, 120 mg of ketorolac, 0.25 mg of droperidol and 90 ml of 5% dextrose water was given continuously at the rate of 2 ml/min. The postoperative visual analogue scale pain score (VAS), the total amount of the analgesics used, the degree of satisfaction of the patients and the developement of side effects were examined for 2 days. Results: VAS were significantly lower in group II than in group I after 9 and 12 hours. The cumulative consumption of analgesics in group II was significantly less than in group I. Most patients were satisfied with this regimen. There were no remarkable side effects. Conclusions: Preemptive analgesia with intravenous nalbuphine decreased postoperative pain and analgesic requirement. The analgesic effect of IV-PCA with nalbuphine-ketorolac was effective in control of postoperative pain in gynecologic surgery.

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.1-14
• /
• 1994

This study is carried out to develope parent education methodology by analysing "${\acute{E}}cole$ des Parents" of France. To study this subject we approach by following three methodes. Firstly, we examined bibliographes to find out motivation of initiative caused from hystological and sociological circumstance. Secondly, to analyse chronological developement and modification of "${\acute{E}}cole$ des Parents" we interviewed with three periods of persons : founder, developer and actually working animators. In addition, we riviewed three hundred eighty volumes of $\underline{{\acute{E}}cole\;des\;Parents}$, from first jurnals to october, 1993. Thirdly, this study were approached by participant observation in actual activities, and by analyse statstical records and subject of articals. In results, we noticed following caractors working in french parent education system. All the regional "${\acute{E}}cole$ des Parents" are alined with "$F{\acute{E}}d{\acute{E}}ration$ Nationale des ${\acute{E}}cole$ des Parents et des ${\acute{E}}ducateurs$"(F.N.E.PE.) in educational polish but activities and methodes of education are independant with F.N.E.P.E., and in most different regional "${\acute{E}}cole$ des Parents" focussed the educational programes to the middle class families in economic point of view. these programes adjust very rapidly systematicaly to social requirment due to successed intensive research. Mordern programs tend to contain all members of family in stead of targeting only maternal members. Methodes of education by lectures and speechs only to deliver information also replaced by discussion, forum and groop animation to induce self-correction. We propose that the systems of FNEPE can be ideal models to solve many actual problems facing in Korean parent education systemes.

• Journal of the Korean Professional Engineers Association
• /
• v.15 no.4
• /
• pp.12-24
• /
• 1982

East Parts of Bangladesh have been benifited by low cost energy generated by domestic natural gas but West parts where energy generated by imported fuel. Bangladesh Government authority has very much concerned to transmit the low cost electricity to the West from the East for past several years. To solve such concerns, cross-country 230kv double circuits Power transmission line was proposed, however there was a big obstacle for the realization of this line to cross the Jamuna river which has 12 km long width with a deep muddy river bed. A consultant engineering firm named Merz-Mclellan anyway finalized this plan and a world-wide bid was announced on June 31, 1979. Due to the expected difficulty to construct the towers on sea like area, only three construction groups have participated. including a Korean joint venture organization of Samsung-Korean Developement corporation-Kolon Electric Machinery company. After 3 months bid evaluation, contract was awarded to Korean Consosium and KEM Co was in charge of designing steel towers with anchor bolts and base plates beside to electrical engineering field. Then KEM Co have faced and over-comed many unenpected technical difficulties such as forced eccentricity joint on base plate, distorsion issue of 60mm thick plates welding, threading anchor bolts, tad heat treatment of some anchor bolts, disagreement from Consultant Engineer on multiplying factor of leg stresses for 45$^{\circ}$ wind and on reducing O.L.F for wind loads on cables for such 1220km long spans. After spending two years long period for designing and engineering towers, base plates, and anchor bolts, first shipment of tower was finally realized on Nov. 8, 1981 and on the other hand KDD has proceeded concrete caisson work on schedule at Jamuna river site and expected to complete tower erection and stringing of cables within this year of 1982 which was original completion target.

• The KIPS Transactions:PartD
• /
• v.8D no.1
• /
• pp.99-104
• /
• 2001

As a plan to counteract solving software crisis, the technology that is called Component Based Software Engineering (CBSE or Componentware) is introsuced. Component Based Software Developement (CBSD) Processes as one of the technique among CBSE have been proposed. Component specification activities among CBSD Processed are necessary and important for generating feusable component. However, the existing CBSD processed can't ensure the correctness in requirements are reflected. In this paper, we propose that formal activities wgich specify component using formal specification language Z which is verified with the ability of analysis and logicality. The proposed activities are composed of 5 tasks and 12 subtasks. By presenting specific 19 products, it is also proposed that component specification activities which are the base of CBSD for reusing. The proposed activities are able to improve qualities of component through correctness and verification of requirements specification of users in the early step of component-based software process.

• Tunnel and Underground Space
• /
• v.6 no.4
• /
• pp.335-341
• /
• 1996

This fundamental study analyzes the relationship between rock thermal properties and psychrometric properties in underground space and has a ultimate goal to develope technologies for predicting major environmental variables. The study is divided into 2 subjects (1) developement of a basic model for predicting temperature and humidity, (2) analysis of the validity of the model through application to a local underground storage space for military supplies. The basic model is built for the network of tunnel-shaped underground spaces. The model takes into account rock thermal properties and changes in moisture content in the air due to condensation/evaporation on the rock surface. Using lumped-parameter analytical method, heat flux from or to the surrounding rock is calculated and then the psychrometric properties(air quantity, pressure, temperature, humidity) are estimated through network simulation. The model can be utilized regardless of the tunnel type. The study site is a local storage space built in rock, mainly granite gneiss and quartz-porphyry. It is a U-shaped tunnel, 593.5m long and 6x6.5m wide. Relative humidity inside has to be strictly controlled under 55% to avoid erosion of a certain types of supplies stored in 6 chambers with the capacity of 300~1.000 ton. The thermal conductivity varies between 2.734 and 2.779W/m$^{\circ}C$ and the thermal diffusivity is in the range of 1.119 and $1.152{\times}10^{-6}\;m^2/s$ the specific heat between 910 and $920\;J/kg^{\circ}C$. Relative errors of the predicted values of dry/wet temperature and relative humidity are 0.8~3.0%, 0~7.5% and 0~7.0%, respectively. Apparent errors associated with the rock surface temperature seems to be partly due to the intrinsic limitations in the infrared thermometer used in this study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.2
• /
• pp.225-233
• /
• 1994

The restorations of the severely damaged teeth by post core have been increased with the developement of endodontic procedures. But high failure rates of these procedures being reported, various restorative modifications were induced for successful treatments. Cast post-core and prefabricated post with core buildups are choice of treatment. The main causes of failure of the restorations are the fracture of post and core, root fracture, and recurrent caries due to microleakage. Recently, the acid etching technique and the use of dentin bonding agent at tooth surface to reduce the possible microleakage at the tooth-restoration interfaces were introduced. The object of this study was to measure and compare the microleakage by the types and cementation methods of post-core. For this study, forty extracted human anterior teeth were selected for specimen. After cleansing and routine endodontic procedures, anatomic crowns of each specimen were removed at the level of 2mm above the cementoenamel junction. Canals were preparated for post insertion and specimens were divided into four groups randomly. Post-cores were fabricated according to method for each group. Microleakage was measured by length of dye penetration at the tooth-restoration interfaces with measuring microscope at 50 magnification. Oneway ANOVA and t-test were performed for statistical analysis of resulting data. The following results were obtained from this study. 1. There wert significant statistical differences in degree of microleakage between each group (p<0.01). 2. Cast post-core cemented with ZPC (Group I) showed the most severe microleakage pattern$(1.5547{\pm}0.0872mm)$, and cast post-core cemented with adhesive resin cement after tooth surface treatment with dentin bonding agent (Group II) showed the least microleakage $(0.1497{\pm}0.0872mm)$. 3. Group IV revealed less dye penetrations than group III, but no statistical significance was seen between two groups.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1431-1437
• /
• 2008

The small-strain shear modulus ($G_{max}$) of uncemented sand is affected by the the mean principal stress and void ratio, and it has been known that the cementation and aging also affect to $G_{max}$ of sand. For extensive understanding about the effect of cementation on the $G_{max}$ of sand, a series of bender element tests was conducted on the cemented specimens prepared in a large calibration chamber by pluviation of the sand-gypsum mixture. It was observed from the experimental results that the $G_{max}$ of cemented sand is higher above 10 times than value of uncemented one, and it increases exponentially with the gypsum content increases. Whereas, the increase of the vertical stress from 50kPa to 200kPa and the relative density from 40% to 80% result in 20~30% and 2 times increase of $G_{max}$, respectively. It means that the gypsum content, that is cementation level, is the most influential factor on the $G_{max}$ of cemented sand. In addition, the effect of relative density on $G_{max}$ was more apparent on cemented sand than uncemented one.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.965-971
• /
• 2011

As the liver cancer in our country cancerous occurrence frequency to be the gastric cancer in the common cancer, If the case which will be discovered in early rising the treatment record was considered seriously about under the early detection. The system which it sees with the system for the early detection of the liver cancer reacts the blood of the control group other than the patient who is confirmed as the liver cancer and the liver cancer to the biochip and aptamer protein biochip profiles mechanical studying leads and it is a system which it classifies. 1149 each other it reacted blood samples of the control group other than the liver cancer patient who is composed of the total 85 samples and the liver cancer which is composed of 310 samples to the biochip which is composed with different oligo from the present paper and it was a data which it makes acquire worker the neural network it led and it analyzes the classification efficiency of the result 95.38 ~ 97.95% which it was visible.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.579-582
• /
• 2000

(R,S)-3-amino-n-butanoic acid$(DL-\;{\beta}\;-homoalanine)$ has been kinetically resolved using Alcaligenes denitrificans Y2k-2 as a biocatalyst, which was isolated from soil by enrichment culture, which was carried out with minimal media containing (R,S)-3-amino-n-butanoic acid as a sole nitrogen source. The enzyme which peformed this kinetic resolution assumed to belong to the ${\omega}-transaminase$ family, because A. denitrificans used pyruvate as amino acceptor and its transaminase activity was inhibited by gabaculine, aminooxy acetic acid and hydroxylamine. In whole cell reaction, (R,S)-3-amino-n-butanoic acid was kinetically resolved to the corresponding (R)-3-amino-n-butanoic acid with excellent E (>100) in the presence of pyruvate as an amino acceptor at $37^{\circ}C$. (S-specific) We observed the substrate inhibition for pyruvate at 100mM. In this study, characteristics of transaminase activity of Alcaligenes denitrificans Y2k-2, such as substrate specificity and thermostability, are carried out for the development of (R)-3- amino-n-butanoic acid production system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.827-830
• /
• 2011

In this paper, a wind speed & direction module and the DSP(Digital Signal Processor) sensor interface circuit board are proposed. This DSP system accepts and process the informations from a wind speed & direction module, the atmospheric pressure sensor, the ambient air temperature sensor and transfers it to the PC monitering system. Especially, a wind speed & direction module and a DSP hardware are directly designed and applied. A wind speed & direction module have a construction that it have four film type RTD(Resistive Temperature Detectors) or film type Piezo sensors adhered around the circular metal body for obtaining vector informations about wind. By this structure, the module is enabled precise measurement having a robustness about vibration, humidity, corrosion. A sensor signal processing circuit is using TMS320F2812 TI(Texas Instrument) Corporation high speed DSP.