• Journal of Advanced Technology Convergence
• /
• v.2 no.2
• /
• pp.9-14
• /
• 2023

This study is shown the result of the first year to develop an export 1050MPa-class lightweight ductile iron castings Austempered control arm through the research process to obtain the following results. First, the structure of the optimal design Layout design and development of the component, and then achieve them through the Control Arm rigidity and optimal structure design and robust design of the focus areas of the expected stress Control Arm. Second, to develop a Control Arm reflects the high rigidity and high performance lightweight structures. Control Arm them developed to meet the design and rigidity as required by the consumer through the hollow, and to develop a process for the Core. Third, through optimum alloy composition and heat treatment methods will be derived to derive the amount of iron alloy (Cu, Ni, Mo) and Austempered heat treated and tempered condition. Fourth, through the development of optimum molding technology development component to develop the optimum ADI for the low-stiffness, high-rigidity component development, it attempts to develop a high-strength casting forming technology..

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.195-203
• /
• 2008

The purpose of this study is to develop a guideline of process capability evaluation and to apply this guideline improving the quality of products, especially in the small and medium enterprises. In this study we deal in the concept of process capability evaluation, the calculation of process capability index, and the application of a case study. Man must compare the state of process with the standards in evaluating of the process capability. Control chart can be used as a yardstick for judgement for the long term period and the distribution shape of histogram for the short term period. Man should regard to the significant figure by the calculation of process capability index.

• Transactions of Materials Processing
• /
• v.14 no.1 s.73
• /
• pp.57-64
• /
• 2005

This study deals with the cold forging process design for shaft in the main part of automobile motors with rectangular deep groove. In forging process, the accuracy and die lift is very important because it have influence on reduction of the production cost and the increase of the production rate. Therefore, it is necessary to develop the manufacturing process of shaft by cold forging., process variables are the cropped face angle of billet and the eccentric load of punch. The former is derived from cropping test, the latter is occurred by clearance between container and preform. Also, grooved preform select the process variable for decrease in punch deflection. We investigate that a deflection of punch and a deformation of preform to every process variables. Through this investigation, we suggest the optimal preform and process design, expect to be improved the tool life in forging process.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.108-115
• /
• 2000

This paper presents a variant type process planning system for machining of dies for auto-body production. Through the analysis of dies and their manufacturing processes, the authors categorized the press dies into 15 groups according to the similarity of machining features. After critically reviewing current manufacturing procedures, a standard process plan was defined for each group. The authors present MP3D the process planning system built on the standard process plan database, and show how they apply it at the die manufacturing plant of an automobile company. MP3D is expected to reduce major losses in machining such as reworking caused by mistakenly uncut features and eventually to help to accumulate the knowledge of operators. The operation sheet MP3D produces is also used in monitoring the progress of manufacturing of dies. This paper explains the whole development cycle of a process planning system from process analysis to application so that it can help readers to develop and apply a process planning system to their machine shops.

• Management Science and Financial Engineering
• /
• v.9 no.2
• /
• pp.21-45
• /
• 2003

Various organizational factors effect successful implementation of IT enabled business transformation. Among them, the most critical success factor is deemed to overcoming change management problem. Lots of studies have been made on implementation methodologies and business process formalizations to encourage organizational members to accept new business process changes. However, the logic of process redesign still depends on qualitative problem solving techniques mostly depending on basically human intuition such as brainstorming, cause-and-effect analysis, and so on. In this paper, we develop algorithmic procedure applicable to designing various business process changes such as process automation, business process resequencing, and more radical process integration. The framework is employed from dynamic programming approach in the literature, which is based on the decision making paradigm of organizations to abstract business processes as quantitative decision models. As such, our research can fill the gap of limited development of theory based analytic methodologies for business process design, by providing objective rationale to reach the consensus among the organizational members including senior management.

• Journal of Educational Research in Mathematics
• /
• v.12 no.4
• /
• pp.457-472
• /
• 2002

In this paper, we deal with the algebraic thinking from the perspective of ‘process’ and ‘object’ aspects. Generally, mathematical concepts have come from the concrete process. We consider the origin of algebra as the arithmetic calculations. Also, the concept of school arithmetic is beginning from actions or procedures. However, in order to develop the alge- braic thinking and to apply this thinking, we have to see the history of algebraic thinking, and find this duality. Next we investigate various researches relating to the ‘process-object duality’. Theses studies suppose that the concept formation and thinking process should be stared from the process-object duality. Finally, we reinterprete many difficulties in algebra - equals sign, variables, algebraic expressions, and linear equations, the principle of permanence of form- from the perspective of the process-object duality.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• International Journal of Contents
• /
• v.4 no.4
• /
• pp.7-11
• /
• 2008

This paper embodies the agent based cinder monitoring system which supports PDA{Personal Digital Assistant). Monitoring system automatically manages data by using data managing agents such as a state managing agent, a location managing agent, a badness managing agent, a circumstances managing agent, etc, and uses a massive data processing agent to manage massive data. The development of agent based data monitoring system for the stable cinder reuse will be an epoch-making method to develop the process mechanized or manual-labored that widely spreads into the real-time automated process.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.257-260
• /
• 2000

The composite composed of glass fabric and BMI resin was fabricated using resin transfer molding(RTM) process. it will be used as a supporting plate of transformer coil for high speed train. To develop a RTM process, permeability of preform was measured and resin properties like a viscosity and gellation time were checked. A resin pre-heating system and a mold system were also designed and developed. Using a vacuum-assisted RTM process, the composite supporting plate was successfully fabricated.

• Journal of Arbitration Studies
• /
• v.26 no.3
• /
• pp.149-173
• /
• 2016

This study vindicates similarities and differences of hybrid process of arbitration and mediation between China and Malaysia. Both countries develop hybrid processes combining arbitration with mediation in their own cultural soils. The Chinese dispute resolver plays the dual role of arbitrator and mediator during the proceedings of hybrid process of arbitration and mediation. On the other hand, a different arbitrator plays the role of mediator, if conciliation fails in Malaysia. On the other hand, judges are allowed to act as mediator during the proceeding in China and Malaysia.