• 한국광학회지
• /
• 제1권1호
• /
• pp.22-27
• /
• 1990

결합형 모드록킹 극초단 색소레이저의 공진기 길이변화에 따른 펄스폭의 변화를 선형 자체상관기를 이용하여 연구하였다. 색소레이저의 공진기 길이가 여기레이저의 공진기 길이와 일치하였을 경우 펄스폭은 0.64ps이며 완벽하게 모드록킹 되었다. 그러나 최적조건보다 색소레이저 공진기 길이가 긴 경우나 짧은 경우에는 펄스폭은 넓어지며 불완전 모드록킹이 되었다. 즉 색소레이저의 공진기 길이가 여기레이저의 공진기 길이보다 길 경우는 자연방출에 의한 noise 때문에 broad base 가 형성되며, 색소 이득이 증가되기 때문에 자체 상관함수의 첨두출력은 최적조건에서의 색소레이저 공진기 길이보다 5 $\mu\textrm{m}$ 긴 조건에서 최대가 되었다. 또 색소레이저의 스펙트럼은 자연방출에 의한 형광 및 색소 이득이 증가되기 때문에 넓게 됨을 관찰할 수 있었다. 그러나 색소레이저의 공진기 길이가 여기 레이저의 공진기 길이보다 짧은 경우에는, 색소 이득이 적게 됨으로 자체 상관함수의 첨두출력도 약하게 되며 스펙트럼의 전반치폭은 좁게 되었다. 한편 최적조건을 벗어나면 스펙트럼의 중심파장이 이동되는 현상을 관찰할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.195-206
• /
• 2024

Shenzhen Innovation Light source Facility (SILF) is a 3.0 GeV fourth generation diffraction limited synchrotron light source currently under construction in Shenzhen. The SILF storage ring is proposed to use two 500 MHz single cell superconducting radio frequency (SRF) cavities to provide 2.4 MV RF voltage. In this study, we examined the geometric structure of mature CESR superconducting cavities and adopted a beam-pipe-type extraction scheme for high-order modes (HOM). One of the objectives of SRF cavity design and optimization in this study is to reduce E_p/E_acc and B_p/E_acc as much as possible to reduce power loss and ensure stable operation of the cavity. To reduce the risk of beam instability and thermal breakdown, the HOM and Multipacting (MP) are simulated. Moreover, the mechanical properties of the cavity are analyzed, including frequency sensitivity from pressure of liquid helium (LHe), stress, tuning, Lorentz force detuning (LFD), the microphone effect, and buckling. By comprehensive design and optimization of 500 MHz single-cell SRF cavities, a superconducting cavity for SILF storage ring was developed. This paper will detailed present the design and simulation.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.5-9
• /
• 2016

The modulation bandwidth of a reflective semiconductor optical amplifier (RSOA) is limited by carrier lifetime. Therefore, it is hard to directly modulate an RSOA with high-speed electrical signals. We theorize that an optical filter can act as an optical equalizer, compensating for the narrow bandwidth limitation imposed by the RSOA. By modeling a time-varying RSOA with a modified transfer matrix method (TMM), we simulated 25 Gbps operation of an RSOA with optical filtering effects. We investigated the impact of detuning the center wavelength of the optical filter on the modulation of an RSOA. The numerical results show that it is possible to modulate an RSOA with an optical filtering effect at 25 Gbps without electronic equalization or digital signal processing.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.683-688
• /
• 2017

The unscented Kalman filter features a direct transforming process involving unscented transformation for removing the linearization process error that may occur in the extended Kalman filter. This paper proposes a reduced-order unscented Kalman filter for the sensorless control of a permanent magnet synchronous motor. The proposed method can reduce the computational load without degrading the accuracy compared to the conventional Kalman filters. Moreover, the proposed method can directly estimate the electrical rotor position and speed without a back-electromotive force. The proposed Kalman filter for the sensorless control of a permanent magnet synchronous motor is verified through the simulation and experimentation. The performance of the proposed method is evaluated over a wide range of operations, such as forward and reverse rotations in low and high speeds including the detuning parameters.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.991-994
• /
• 1998

We demonstrate wavelength conversion of 2.5 Gb/s optical signals by cross-gain modulation (XGM) in a semiconductor optical amplifier (SOA). We investigate the effect of input pump and probe powers on the extinction ratio and power penalty to be a measure of performance in wavelength converters. As a result, we show that the best bit error rate (BER) performance can be obtained when the probe power is kept 3 dB weaker than the pump power. And we investigate the effect of wavelength detuning on performance in wavelength converters.

• 한국자기공명학회논문지
• /
• 제21권4호
• /
• pp.114-118
• /
• 2017

Here, I report solid state Dynamic Nuclear Polarization (DNP) of $^1H$ nuclear spins at 0.3 T and 4.2 K. The DNP polarizer was developed based on a commercial X-band Electron Spin Resonance (ESR) modified for DNP, in combination with a NMR console and a liquid-Helium cryostat. By detuning magnetic field, DNP spectrum was measured to find the optimal condition. At +3 mT detuned from on-resonance field, $^1H$ NMR signal of 60:40 glycerol/water frozen solution doped with 20 mM perdeuterated-Tempone was amplified 43 times. The $^1H$ spin polarization obtained at 4.2 K is over 3100 times higher than that at 300 K. The width of the DNP spectrum, which is five times broader than ESR spectrum, is inconsistent with solid effect or thermal mixing, and presumably suggests a different DNP mechanism.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.492-501
• /
• 2018

In the rotor-flux oriented control used in induction motors, the electrical parameters of the motors should be identified. Among these parameters, the mutual inductance and rotor resistance should be accurately tuned for better operations. However, they are more difficult to identify than the stator resistance and stator transient inductance. The rotor resistance and mutual inductance can change in operations due to flux saturation and heat generation. When detuning of these parameters occurs, the performance of the control is degenerated. In this paper, a novel method for the concurrent identification of the two parameters is proposed based on recursive least square estimation and model reference adaptive control.

• 대한전기학회논문지
• /
• 제37권8호
• /
• pp.557-562
• /
• 1988

This paper presents a class of discrete adaptive controller that can be applied to a plant without sufficient a priori information. It is well known that the GMV(Generalized Minmum Variance) contrlller performs satisfactorily if the plant time delay is known. By introducing the long-range prediction into the GMV controller, robustness to the time delay can be improved, although optimality is lost. Such an idea motivates a predictive control system to be proposed here, where the system minimizes multi-stage cost via the GMV approach. Moreover, the detuning control weight is determined by an on-line tuning method. It is shown that robustness, computational efficiency, and performance of the resulting control system are improved as compared with those of the GPC(Generalized Predictive Control)system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2770-2772
• /
• 1999

This paper discusses the basic principle of vector control applied to induction motors. A indirect strategy for impressed stator currents control is used for system modeling. IRFOC for induction motor was modelled using "Matlab with Simulink" IRFOC be applied to 15kW induction motor is simulated in different conditions; step changes in torque at a fixed reference speed, and cyclic change of speed reference. Simulation result considering the variation of stator, rotor resistance includes the response of speed, torque and rotor d-q fluxes.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.83-89
• /
• 1997

An optimize delectroabsorption modulator structure is designed for high speed optical communication systems considering the extinction efficiency, operating bandwidth, polarization loss, and wavelength chirping. the operating wavelength region is $1.55\mu\textrm{m}$ and the deep ridge structure is adapted for th eminimum polarization loss. Simulations show that the absorption layer thickness larger than $0.25\mu\textrm{m}$, and the modulator length shorter than $200\mu\textrm{m}$ are required for the bandwidth over 10GHz. To obtain the modulatiron efficiency over 10dB/V, a wavelength detuning needs to be determined less than 40meV.