• The Journal of Korean Physical Therapy
• /
• 제27권2호
• /
• pp.96-105
• /
• 2015

Purpose: This study was conducted in order to explore self-perceived objectives, effects, determinant factors of satisfaction and demands on home-based rehabilitation service (HBRS) based on a community-based rehabilitation (CBR) model in community-dwelling disabilities. Methods: This research was conducted through in-depth interview. HBRS was conducted by four physical therapists for one hour a day, once a week, for eight weeks. After an eight-week intervention period, in-depth interviews were conducted using a semi-structured questionnaire for five recipients of HBRS and six care givers. Results: For the physical effect, some participants experienced positive effects, whereas others did not due to the short-term intervention period. For the social and emotional effects, 'occurrence of motivation for exercise', 'change of surroundings' and 'sorriness for the therapist' emerged as keywords. For the determinant factors of satisfaction, 'movement-inducing therapy', 'therapy from the specialist', 'development of friendship & social network', and 'learning the way of self-rehabilitation' emerged as keywords. For further demands on HBRS, participants stated that 'sufficient time for therapy', 'user opinion-reflected therapy', 'additional instructions for therapeutic exercise & activities of daily living', and 'active promotion for HBRS' were necessary. Conclusion: Participants were satisfied with the physical, social, emotional, and educational aspects of HBRS. In particular, the participants regarded educational aspects as the significant factor throughout self-perceived objectives, determinant factors of satisfaction and the demands. This result suggests that when providing HBRS to community-dwelling persons with disabilities, therapists should recognize the necessity and significance not only of the physical, but also the educational aspect of HBRS.

• 경영과정보연구
• /
• 제5권
• /
• pp.185-209
• /
• 2000

A review of shows that past research has focused predominately on foreign market entry strategy issues in relatively well-established firms. These studies have either ignored venture firms or have failed to treat these firms separately. Only recently, researchers have broadened their search to include aspects of the foreign market investment of the venture. The purposes of this study are to identify and explain the impact factors such as ownership specific advantage, transaction cost, and location specific advantage on the choice of foreign market entry strategy for venture firms. To find the perceived the foreign market entry strategy and determinant factors, 130 venture CEOs from the computer and communications equipment industries were asked to describe their venture's foreign market entry strategy through 17 questionnaire items on competitive method. Using factor analysis, the six determinant factors were categorized. To test the relationships between the foreign market entry strategy and factors such as ownership specific advantage, transaction cost, and location specific advantage, the data collected by questionnaire from 92 ventures. The main results of this research are as follows. First, the factors of ownership specific advantage have partially significant impact on the foreign market entry strategy of venture firms, Second, the factors of transaction cost have significant impact on their foreign market entry strategy. Third, the factors of location specific advantage have significant impact on their foreign market entry strategy. This study has produced evidence to demonstrate that the foreign market entry strategy profile of venture firms can be distinguished from those of relatively well-established firms. An expanded study would allow for stronger conclusions regarding the relative explanatory power of individual variables in the method. Additional research is also needed to examine other determinant variables connecting foreign market entry strategy.

• Journal of Construction Engineering and Project Management
• /
• 제8권2호
• /
• pp.17-33
• /
• 2018

This study investigates the stability of professionals' cost variability factor-rankings across different levels of cost-variability and response scenarios. Descriptive statistics are used to examine the stability of factor-ranking for 20 cost variability factors and a Multinomial Logistic (MNL) regression model was implemented to examine the stability of cost variability factors across three cost variability levels. The finding on the descriptive statistics indicated that professionals' factors-rankings are stable only for external factors. The MNL regression results on factor-stability suggested that 8 out of the 20 evaluated factors were unstable determinant of lower cost variability levels. These factors are "risk associated with the project", "personal bias and poor professionalism of the estimators", "limited time available to complete the project", "lack of skills and experience by estimator" "geographical location of projects", "incomplete & rush designs for estimate", "unforeseen or unexpected site constraints", "high class bidders for the contractors". Similarly lack of experience and large size projects were observed to be unstable as well. These observations suggest that professionals' view on pre-tender cost variability factor-ranking yields unstable factor rankings hence should not be relied upon as the only mechanisms to mitigate cost related risks in construction projects.

• 한국주거학회논문집
• /
• 제3권2호
• /
• pp.51-61
• /
• 1992

The aims of this study are to imvestigate the changes seen in rural kitchens and the factors affecting the modernization of agrarian kitchen space in mountain areas, and to compare them with those in the plains. The major findings are as follows. 1) The kitchen space in mountain areas remained in the state of a combined style(depicting both western and traditional styles), while the kitchen space in the plains after the 1980s showed a tendency toward the western style. Generally speaking, the physical state of kitchens in mountain farmhouses, therefore, was at a low level in comparison with that of the plains. 2) The kitchen improvement projects of Sae-Ma-Eul Movement fostered a trend toward the western and combined style kitchens in the plains, but it did exert a little influence only on a part of the four mountain areas, and it resu]led in a combination of both styles. 3) Among the socio-demographic characteristics under consideratien. only the level of education achieved by the wi fe was found to be a determinant factor of the kitchen type in the mountain areas. but the level of education achieved by the husband and the family life cycle were two determinant factors in the plains. Under the category of family life style. the factors affecting the kitchen type in the mountain areas were cooking-heating fuel and the position of the refrigerator, while the main factors in p]ains were the place and the method of eating. cooking-heating fuel, the position of refrigerator, and numbers of family-memorials.

• 한국병원경영학회지
• /
• 제15권2호
• /
• pp.15-26
• /
• 2010

Stroke is a high-risk disease. The future of the medical environment is that the proportion of elderly population is increasing, the average life expectancy is being increased, while the fatal rate of stroke will be low. These situation will due to the financial burden on medical insurance. The most important factor that affects on the medical costs of stroke patients is the length of stay. In this study the mean length of hospital for stroke stay was 21.81days(37.97days for intracerebral hemorrhage, 18.89 days for cerebral infarction). The payment per case of stroke was 6.86 million won(12.6 million won for intracerebral hemorrhage, 5.72 million won for cerebral infarction). The payment per case of intracerebral hemorrhage was 2.2 times more than that of cerebral infarction. The payment in the day of hospitalization was the highest and until the second day medical costs was high. After the third day medical costs tended to decline, after that seemed to show an almost constant level. The length of hospital stay was found to be the most important determinant of inpatient charges for stroke. Accordingly rational management of the length of stay will be beneficial to health care consumers, providers, states.

• Structural Engineering and Mechanics
• /
• 제19권3호
• /
• pp.347-359
• /
• 2005

This paper attempts to develop the analytical model of estimating the fatigue damage using a linear elastic fracture mechanics method. The stress history on a welding member, when a truck passed over a bridge, was defined as a block loading and the crack closure theory was used. These theories explain the influence of a load on a structure. This study undertook an analysis of the stress range frequency considering both dead load stress and crack opening stress. A probability method applied to stress range frequency distribution and the probability distribution parameters of it was obtained by Maximum likelihood Method and Determinant. Monte Carlo Simulation which generates a probability variants (stress range) output failure block loadings. The probability distribution of failure block loadings was acquired by Maximum likelihood Method and Determinant. This can calculate the fatigue reliability preventing the fatigue failure of a welding member. The failure block loading divided by the average daily truck traffic is a predictive remaining life by a day. Fatigue reliability analysis was carried out for the welding member of the bottom flange of a cross beam and the vertical stiffener of a steel box bridge by the proposed model. Results showed that the primary factor effecting failure time was crack opening stress. It was important to decide the crack opening stress for using the proposed model. Also according to the 50% reliability and 90%, 99.9% failure times were indicated.

• 대한안전경영과학회지
• /
• 제23권1호
• /
• pp.81-94
• /
• 2021

In SMEs, technological innovation is recognized as an important tool in terms of sustainable growth. This study analyzed the determinants of technological innovation by using the information of the corporate panel DB composed of local SMEs. The internal factors were added with technological innovation capacity and production capacity and the industrial cluster environment was first applied to external factors. Also, whether the industrial cluster environment influences technological innovation through R&D capabilities, the mediating effect was tested with the Sobel Test. Among the internal and external factors, the most important determinant was marketing ability, and a policy was proposed to develop measures to increase R&D capability with mediating effect. Among the technological innovation variables, which are dependent variables, the most determinant factor was the proportion of new product sales. For this, it is considered that additional research such as longitudinal research with the concept of repetition and parallax using the corporate panel DB is necessary.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권9호
• /
• pp.301-311
• /
• 2021

Most leadership styles are generally designed to enhance the cognitive and behavioral skills of leaders with the implicit assumption that this would ultimately translate into high performance. As we are moving towards Industry 4.0, organizations must employ leadership styles that will help the organization succeed. Thus, the objective of this paper is to confirm the determinant factors for Fourth Industrial Revolution (4IR) leadership attributes in Malaysian manufacturing companies. Stratified sampling was used to select the sample. Data was collected using the online survey method, where the response rate was 43 percent. The respondents consisted of respondents aged from 31-40 years old, with 69 respondents. In terms of race, the highest number of respondents are the Malays. Questionnaires were distributed to middle and top-level managers from manufacturing companies which were listed in the Federation of Malaysian Manufacturers (FMM). Confirmatory Factor Analysis (CFA) was used to confirm the reliability and validity of the construct. Based on the analysis, 66 items could be used to measure the 4IR leadership attributes. The validation of 4IR leadership can also provide predictive implications on improving leaders' performance, given the different attributes confirmed by the findings.

• 대한인간공학회지
• /
• 제23권2호
• /
• pp.1-12
• /
• 2004

The purposes of this study were to investigate the relationship between anthropometric data of foot and other body sizes. to categorize the foot shape of elementary school boys and to find out determinant factors related the foot that enable us to deduce the foot shape and size for the design of more comfortable shoes. Subjects of this study were 249 elementary school boys of age ranged from 6 to 11 residing Seoul and lncheon area. Anthropometric sizes were measured with the direct measurement method using Martin scales and the indirect measurement method using digital photos. Pearson's correlation, factor analysis. cluster analysis. analysis of variance, post-hoc test, and cross tabs were performed for statistical analysis of the data by SPSS program. From the investigation on the relationship between foot-related items and body items, most items of foot measure were significantly related to body size items. However, angle of the foot did not related to other body sizes although other height items and mass items of the foot did have relationships with other body sizes. Results of ANOVA indicated there were significant differences in foot-related items except for items of foot angle and all body anthropometric items by subjects' age. This implicates big toe angle, little toe angle and foot ratio factors are required in sizing shoes besides foot length. On the basis of cluster analysis using factor scores. three different foot shapes were categorized. Type 1 was large and wide foot, Type 2 was small and narrow foot with large toe angle. and Type 3 was medium foot with no deformity on big toe. These three groups show significant differences in almost all measurement items. However, Rorher index and foot angle didn't show any significant differences among groups. This implicates the foot shape can be a determinant of shoe size.

• Journal of Preventive Medicine and Public Health
• /
• 제48권1호
• /
• pp.18-27
• /
• 2015

Objectives: Civic participation, that which directly influences important decisions in our personal lives, is considered necessary for developing a society. We hypothesized that civic participation might be related to self-rated health status. Methods: We constructed a multi-level analysis using data from the World Value Survey (44 countries, n=50 859). Results: People who participated in voting and voluntary social activities tended to report better subjective health than those who did not vote or participate in social activities, after controlling for socio-demographic factors at the individual level. A negative association with unconventional political activity and subjective health was found, but this effect disappeared in a subset analysis of only the 18 Organization for Economic Cooperation and Development (OECD) countries. Moreover, social participation and unconventional political participation had a statistically significant contextual association with subjective health status, but this relationship was not consistent throughout the analysis. In the analysis of the 44 countries, social participation was of borderline significance, while in the subset analysis of the OECD countries unconventional political participation was a stronger contextual determinant of subjective health. The democratic index was a significant factor in determining self-rated health in both analyses, while public health expenditure was a significant factor in analysis of 18 countries. Conclusions: Our investigation suggests that civic participation, including unconventional political activity at the contextual level, might be a significant determinant of health status of a country.