• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.301-328
• /
• 2006

The geology of the Tumbang Mirih area in the Middle Kalimantan, Indonesia comprises Permian to Carboniferous Pinoh Metamorphic Rocks and Cretaceous Sepauk Plutonics of the Sunda Shield, late Eocene Tanjung Formation, Oligocene Malasan Volcanics, Oligocene to early Miocene Sintang Intrusives and Quaternary alluvium. Results of geochemical exploration and geological mapping exposed obviously that large amounts of gold-bearing quartz veins were found in the whole Tumbang Mirih areas. In many places, gold grains were megascopically detectable from panning products of stream sediments and conglomerate as Quaternary sediments. Even though no remnants of quartz veins are revealed in the most of survey area except Taran region, association of fold grains with layers of quartz pebbles and clays which correspond to the horizon of unconformity or previous river bottom indicates that the gold grains were separated from quartz veins. Along rivers often pebbles and clay layers just over or 10 to 20cm above the current waterlevel are recognized. The occurrence of gold in the conglomeratic layer was frequently confirmed during geochemical exploration. Since the conglomeratic layer was old stream sediments of Quaternary, it can be assumed that deposition of golds was controlled by shape of river floor, speed and shape of river flow, and distance from the source rock. Taran area and northern Takaoi area based on the all data are recommended as the promising areas.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.272-281
• /
• 1995

The residual Polychlorinated biphenyls(PCBs) in the sediment of the Kumho River basin were measured because the Nakdong River was considered to be affected by the environmental quality of Kumho River. PCBs in the sediment were chlorinated and converted into Decachlorinated biphenyl(DCB) which showed the single peak in the GC-ECD chromatogram. The detectable concentrations of PCBs was 0.5ng/g in the sediment. PCBs in the 21 sediment samples was of Kumho River located at 7.5km from conjunction of Nakdong River were not detected from 100 samples. 49% of samples was showed lower than 50ng/g, and 9% did more than 400ng/g. The mean of PCBs concentrations was 131ng/g. The means of COD and organic carbon were 14.5mg/g and 3.41%, respectively. The relationship between PCBs were concentration and the distance from conjunction with Nakdong River was not significant. The concentration of PCBs were varied with the depth of the sediment down to the 250cm depth. The concentrations of PCBs in the depth 0-20cm and 50-90cm were higher than the mean concentration of PCBs. Along the cross of the stream, the concentrations of PCBs were 142ng/g at the center and 126 and 131ng/g at the river sides.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.109-115
• /
• 2020

As the maritime targets that threaten allies become lower, smaller, and faster, the need for analysis and modeling of clutter according to sea state increases. Clutter according to the sea state has a great influence on radar performance, such as lowering the probability of detection of low-altitude small maritime targets. In this paper, to analyze the detection performance of a multi function radar for a ship, a sea clutter model suitable for the radar operating environment is selected from several sea clutter models, and analysis of low-altitude, small target detection under a clutter is performed. By using the actual data of the already mounted radar for maritime target detection, four known clutter models have been implemented for each sea state and compared with the actual data. Through this, by selecting a clutter model that best reflects the actual radar environment, reliability of the clutter model is improved. Subsequently, the selected model is used to detect the detectable distance to the low-altitude small target.

• The Korean Journal of Pesticide Science
• /
• v.11 no.1
• /
• pp.32-37
• /
• 2007

The study was carried out to establish buffer zone for the protection of the non-target organisms by aerial pesticide application. The two pesticide combination of 3-way tank-mixing of three pesticides for aerial application, ferimzone tricyclazole SC + BPMC EC + validamycin-A SL and hexaconzole EC + isoprothiolane EC+phenthoate EC were selected for the simultaneous control of key pests on paddy rice as blast, sheath blight, brown planthopper and moth. Aquatic organisms including killifish and loach in the paddy field and nearby water reservoirs were not affected by aerial application of the pesticides. However, all the water flea were killed, when they were exposed 10 m from the aerially sprayed site, while the water flea exposed in 30 m away from the site were not affected. Honeybees within 50 m in the wind direction and 20 m in the opposite wind direction showed a mortality of $7{\sim}100%$. Residues concentration of the pesticides in paddy water were not detectable level after six days from aerial application. Drifting distance of aerially sprayed droplet from the target area was within 30 m in the wind direction and 20 m in the opposite direction. Consequently, it was the buffer zones in the aerial pesticides application for the protection of the non-target organisms should be at least 50 m for aquatic organisms and 100 m for honeybees.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.1-10
• /
• 2019

This paper proposes a method to improve the detectable distance by reducing noise to perform a signal processing technique on the received signals. To increase the radar detection range, the noise component of the received signal has to be reduced. The proposed method reduces the noise component by employing two methods. First, the radar signals received with multiple pulses are accumulated. As the number of additions increases, the noise component gradually decreases due to noise randomness. On the other hand, the signal term gradually increases and thus signal to noise ratio increases. Secondly, after converting the accumulated signal into the frequency spectrum, a Least Mean Square (LMS) filter is applied. In the case of the radar received signal, desired signal exists in a specific part and most of the rest is a noise. Therefore, if the LMS filter is applied in the time domain, the noise increases. To prevent this, the LMS filter is applied after converting the received signal into the entire frequency spectrum. The LMS filter output is then transformed into the time domain and then range estimation algorithm is performed. Simulation results show that the proposed scheme reduces the noise component by about 25 dB. The experiment was conducted by comparing the proposed results with the conventional results of the radars held by the Korea Aerospace Research Institute for the international space station.

• Journal of the Korean earth science society
• /
• v.41 no.6
• /
• pp.647-657
• /
• 2020

Infrasound signals associated with the 29 May 2004 offshore Uljin earthquake (Mw 5.1) were recorded at infrasound arrays of CHNAR (epicentral distance of 321 km) and TJNAR (256 km). Back-azimuths, indicating the directions to source locations, varied more than 28° broadly for the long-lasting signals over several minutes. From the analysis of the back-projecting location method and attenuation correction for infrasound propagation, the infrasound waves were to be generated by the interaction (diffraction) between seismic waves and topography in an area of ~4,600 ㎢ connecting the Samcheok-Uljin-Pohang regions. The maximum sound source pressure (BSP) was estimated to be 11.1 Pa. This result was consistent with the peak sound pressure (PSP) calculated by the Rayleigh integral approximation to the peak ground acceleration (PGA) dataset. In addition, the minimum PGA that was detectable at the two arrays was estimated to be ~3.0 cm s-2. Although the earthquake occurred offshore, diffracted infrasound signals were effectively generated by ground motions when seismic surface waves passed through high-topographic regions in the eastern Korean Peninsula. The relationship between infrasound source pressure and PGA can be applicable to characterize the ground motions in areas with insufficient seismological observatories.

• Korean Journal of Exercise Nutrition
• /
• v.16 no.2
• /
• pp.65-71
• /
• 2012

Oxygen is the final acceptor of electron transport from fat and carbohydrate oxidation, which is the rate-limiting factor for cellular ATP production. Under altitude hypoxia condition, energy reliance on anaerobic glycolysis increases to compensate for the shortfall caused by reduced fatty acid oxidation [1]. Therefore, training at altitude is expected to strongly influence the human metabolic system, and has the potential to be designed as a non-pharmacological or recreational intervention regimen for correcting diabetes or related metabolic problems. However, most people cannot accommodate high altitude exposure above 4500 M due to acute mountain sickness (AMS) and insulin resistance corresponding to a increased levels of the stress hormones cortisol and catecholamine [2]. Thus, less stringent conditions were evaluated to determine whether glucose tolerance and insulin sensitivity could be improved by moderate altitude exposure (below 4000 M). In 2003, we and another group in Austria reported that short-term moderate altitude exposure plus endurance-related physical activity significantly improves glucose tolerance (not fasting glucose) in humans [3,4], which is associated with the improvement in the whole-body insulin sensitivity [5]. With daily hiking at an altitude of approximately 4000 M, glucose tolerance can still be improved but fasting glucose was slightly elevated. Individuals vary widely in their response to altitude challenge. In particular, the improvement in glucose tolerance and insulin sensitivity by prolonged altitude hiking activity is not apparent in those individuals with low baseline DHEA-S concentration [6]. In addition, hematopoietic adaptation against altitude hypoxia can also be impaired in individuals with low DHEA-S. In short-lived mammals like rodents, the DHEA-S level is barely detectable since their adrenal cortex does not appear to produce this steroid [7]. In this model, exercise training recovery under prolonged hypoxia exposure (14-15% oxygen, 8 h per day for 6 weeks) can still improve insulin sensitivity, secondary to an effective suppression of adiposity [8]. Genetically obese rats exhibit hyperinsulinemia (sign of insulin resistance) with up-regulated baseline levels of AMP-activated protein kinase and AS160 phosphorylation in skeletal muscle compared to lean rats. After prolonged hypoxia training, this abnormality can be reversed concomitant with an approximately 50% increase in GLUT4 protein expression. Additionally, prolonged moderate hypoxia training results in decreased diffusion distance of muscle fiber (reduced cross-sectional area) without affecting muscle weight. In humans, moderate hypoxia increases postprandial blood distribution towards skeletal muscle during a training recovery. This physiological response plays a role in the redistribution of fuel storage among important energy storage sites and may explain its potent effect on changing body composition. Conclusion: Prolonged moderate altitude hypoxia (rangingfrom 1700 to 2400 M), but not acute high attitude hypoxia (above 4000 M), can effectively improve insulin sensitivity and glucose tolerance for humans and antagonizes the obese phenotype in animals with a genetic defect. In humans, the magnitude of the improvementvaries widely and correlates with baseline plasma DHEA-S levels. Compared to training at sea-level, training at altitude effectively decreases fat mass in parallel with increased muscle mass. This change may be associated with increased perfusion of insulin and fuel towards skeletal muscle that favors muscle competing postprandial fuel in circulation against adipose tissues.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.45-54
• /
• 2005

A field survey was conducted to determine the concentration of odor compounds from pig buildings and that were 20 meters within the boundary area. The odor compounds were measured from large, medium and small farms with enclosed and open housing systems and slurry and sawdust manure fermentation treatment methods. Among the odor compounds investigated, ammonia ($NH_3$) had the highest concentration at 0.9 ${\~}$ 21.0 ppm followed by Hydrogen Sulfide($H_2S$) with a wide variation concentration of 51.9 ${\~}$ 6,712.4 pub, Uethylmercaptan($CH_3SH$) with non-detectable (N. D.) ${\~}$ 12.9 ppb, Dimethylsulphide($(CH_3)_2S$), with N. D. ${\~}$ 5.2 ppb and Dimethyldisulphide($(CH_3)_2S_2$) with N. D. ${\~}$ 2.6 ppb. Considering the prevailing wind direction and air velocity ranging from 0.23 to 0.73 m/s within the boundary area, the odorous matters; $NH_3$, $H_2S$, $CH_3SH$, $(CH_3)_2S_2$ and $(CH_3)_2S$ were 0.2${\~}$4.5 ppm, 0.01 ${\~}$0.06 ppb, N. D. ${\~}$0.009ppb, N. D.${\~}$0.002ppb and N. D. for $(CH_3)_2S$ respectively. These findings suggested that the Odor compounds $(CH_3)_2S_2$ had the lower detection in the boundary area whilst $(CH_3)_2S$ had no detection level within a 20-meter distance only. However, with these results odor compounds from pig buildings has to be further investigated under more controlled environmental factors.