• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.90-98
• /
• 2006

As management is becoming a focus of a construction industry, conprehensive construction management is needed. Thus a plan of improving a design work process for developing design work capacity is proposed. The plan of improving a design work process based on a information flow for decision makings is expected to be a good ground material of not only smooth communication among stakeholders and information tracing, but also effective management of whole process. Theplansuggestedinthisstudyissummarizedas: (1) Detailed and clear work definition (2) information-oriented work definition (3) Strengthening works related to design management

• Structural Engineering and Mechanics
• /
• v.41 no.1
• /
• pp.1-24
• /
• 2012

A reinforced concrete (RC) framed structure detailed according to non-seismic detailing provisions as per Indian Standard was tested on shake table under dynamic loads. The structure had 3 main storeys and an additional storey to simulate the footing to plinth level. In plan the structure was symmetric with 2 bays in each direction. In order to optimize the information obtained from the tests, tests were planned in three different stages. In the first stage, tests were done with masonry infill panels in one direction to obtain information on the stiffness increase due to addition of infill panels. In second stage, the infills were removed and tests were conducted on the structure without and with tuned liquid dampers (TLD) on the roof of the structure to investigate the effect of TLD on seismic response of the structure. In the third stage, tests were conducted on bare frame structure under biaxial time histories with gradually increasing peak ground acceleration (PGA) till failure. The simulated earthquakes represented low, moderate and severe seismic ground motions. The effects of masonry infill panels on dynamic characteristics of the structure, effectiveness of TLD in reducing the seismic response of structure and the failure patterns of non-seismically detailed structures, are clearly brought out. Details of design and similitude are also discussed.

• Journal of KIBIM
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2019

Visualized information platforms through building information modeling (BIM) such as virtual reality (VR) and augmented reality (AR) improves the efficiency of architectural information exchange. Despite that, less effort has been directed to evaluate the effectiveness of different BIM visualization platforms for architectural design review. This study fills these gaps and compares three BIM visualization tools for reviewing diverse architectural review factors and technology acceptance degree. Three main BIM visualization tools, which are desktop-based, virtual reality-based and augmented reality-based, were employed and different architectural review factors and user's technology acceptance degree was measured. As a result, VR and AR environment showed better visual presentation than desktop environment during design review. In terms of the technology acceptance level, VR and AR environments have received higher ratings compared to desktop environments. The detailed findings provide guidelines for participants and researchers involved in design review process to selectively adopt VR and AR system to various architectural design review components.

• KIEAE Journal
• /
• v.17 no.5
• /
• pp.51-59
• /
• 2017

Purpose: This study aims to set up the classification system for providing infill information and draw detailed infill information required by suppliers, thereby promoting the revitalization of long-life housing and utilizing such information as preliminary data for establishing web system, on which infill information required by users in the long-life housing design process are available. Method: For the method of study, the infill information classification system and detailed information were drawn through the analysis of existing building material information systems; and the survey targeting working-level personnel was carried out in order to verify the drawn information system. The results of this study can be summarized as follows. First, the hierarchical classification system (scheme) was selected by quoting the classification system by material type as infill type, after analyzing existing DB information systems and drawing the hierarchical classification system for infill. Second, the comparative analysis between infill was available to users for the detailed infill information of long-life housing, and the essential information and general information were selected for differentiating information. Results: First, the hierarchical classification system (scheme) was selected by quoting the classification system by material type as infill type, after analyzing existing DB information systems and drawing the hierarchical classification system for infill. Second, the comparative analysis between infill was available to users for the detailed infill information of long-life housing, and the essential information and general information were selected for differentiating information. Third, only approximately 30% of the survey respondents recognized the infill of long-life housing, but they did not recognize its difference from existing building materials. Fourth, through the analysis of paths to obtain infill information of long-life housing, it was confirmed that infill information was obtained mostly through books and research papers regarding long-life housing, followed by the existing information systems. The significance of the study lies in that it is differentiated from the previous information system as the information system specialized in the infill of long-life housing was established, and can be used as a measure to revitalize long-life housing market.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.3
• /
• pp.302-318
• /
• 2002

As facing the challenges from many competitors, the Office of Korea Postal Service has issued the fundamental plan of business renovation which includes the master plan of the information systems. In this paper we discuss the design of a to-be information system for postal service, which will be provided for the completion of the master plan. After briefly discussing the issues on developing information system and the current situation, we provide the design concept and the framework of the to-be system based on the bench marking and gap analysis with advanced systems. The to-be system consists of eight subsystems which can be grouped into three categories; intelligent systems, operational systems, and platforms. We develop detailed specification of each subsystem and provide an operational scenario. We also explain how the to-be system compatibly fits into an integrated information system, which will include the postal, banking, and management functions, to perform its ultimate role for the efficient postal service.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2130-2137
• /
• 2020

The standard method for calculating anti-neutrino emissions from a reactor involves knowing the fractional fission rates for the most important fissioning nuclides in the reactor. To calculate these rates requires detailed reactor physics calculations based upon the reactor design, fuel design, burnup dependent fuel composition, location of specific fuel assemblies in the core and detailed operational data from the reactor. This has only been published for a few reactors during specific time periods, whereas to be of practical use for anti-neutrino reactor monitoring it is necessary to be able to predict these on the publicly available information from any reactor, especially if using these data to subtract the anti-neutrino signal from other reactors to identify an undeclared reactor and monitor its operation. This paper proposes a method to estimate the fission fractions for a specific reactor based upon publicly available information and provides a database based upon a series of spent fuel inventory calculations using the FISPIN10 code and its associated data libraries.

• Journal of The Korean Association of Information Education
• /
• v.15 no.4
• /
• pp.561-569
• /
• 2011

In order to solve the problems of the information society and the reverse function of chatting, there is a growing need of seeking out approachable educational methods. Therefore, we need to offer that addresses these issues ethical education from elementary school years where the creation of sound personality and its course may be hurt unless otherwise. Yet, there is no detailed curriculum for chatting education which is one of the detailed education areas. Also, how to offer and utilize the chatting education has never been mentioned. Moreover, only reverse function of information-driven changes have been emphasized whereas their desirable functions and information ethical principles have been simply neglected. The paper presents the effectiveness for improvement the school chatting education.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.64-70
• /
• 2019

Video files of video devices such as black box and CCTV may be damaged due to repetitive file read / write and physical environment factors. Even though there are available parts of video information, it may happen that playback can't be performed due to damage of some information. To playback the remaining video information normally, it is necessary to recover damaged areas of the files. For this, it is necessary to accurately check the damage range of the files. In this paper, we propose the design and implementation of a tool which detects damaged areas of a video file and recovers the usable area of the file to playback. The proposed tool can analyze and recover without additional information by analyzing common information of video container format and can check detailed damaged ranges with chunks. It is possible to perform recovery just only with the target file and reference file without any other information such as codec specification.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.900-910
• /
• 2012

In this paper, a novel trellis-coded spatial modulation (TCSM) design method is presented and analyzed. Inspired by the key idea of trellis-coded modulation (TCM), the detailed analysis is firstly provided on the unequal error protection performance of spatial modulation constellation. Subsequently, the Ungerboeck set partitioning rule is proposed and applied to develop a general method to design the novel TCSM schemes. Different from the conventional TCSM approaches, the novel one based on the Ungerboeck set partitioning rule has similar properties as the classic TCM, which has simple but effective code design criteria. Moreover, the novel designed schemes are robust and adaptive to the generalized Rician fading channels, which outperform the traditional TCSM ones. For examples, the novel 4-, 8-, and 16-state TCSM schemes are constructed by employing different transmit antennas and different modulation schemes in different channel conditions. Simulation results clearly demonstrate the advantages of the novel TCSM schemes over the conventional ones.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.274-278
• /
• 2013

Over the past several years, the building codes that govern commercial building construction have become increasingly prescriptive in nature, specifying detailed information related to the design and installation of the systems, while offering no reasoning behind their prescriptive measures. For example, metal stud framing is commonly used in commercial building construction to create bearing walls and non-bearing partition walls. BIM provides a powerful platform for developing and implementing "pre-planning" tools and methods to facilitate both engineering and administrative controls during construction. This paper discusses the use of BIM to enhance constructability for commercial building construction activities, specifically metal stud framing. Using specific real-world examples this paper demonstrates ways that BIM can be used to foresee potential construction issues and motivates and informs future uses of BIM technologies