• Title/Summary/Keyword: desirable species

Search Result 159, Processing Time 0.028 seconds

Numerical Simulation of Chemically Reacting Laminar and Thrbulent Flowfields Using Preconditioning Scheme (예조건화 기법을 이용한 층류 및 난류 화학반응 유동장 해석)

  • Kim Gyo-Soon;Choi Yun-Ho;Rhee Byung-Ohk;Song Bong-Ha
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.30 no.4 s.247
    • /
    • pp.320-327
    • /
    • 2006
  • The computations of chemically reacting laminar and turbulent flows are performed using the preconditioned Navier-Stokes solver coupled with turbulent transport and multi-species equations. A low-Reynolds number $k-\varepsilon$ turbulence model proposed by Chien is used. The presence of the turbulent kinetic energy tenn in the momentum equation can materially affect the overall stability of the fluids-turbulence system. Because of this coupling effect, a fully coupled formulation is desirable and this approach is taken in the present study. Choi and Merkle's preconditioning technique is used to overcome the convergence difficulties occurred at low speed flows. The numerical scheme used for the present study is based on the implicit upwind ADI algorithm and is validated through the comparisons of computational and experimental results for laminar methane-air diffusion flame and $ H_2/O_2$ reacting turbulent shear flow. Preconditioning formulation shows better convergence characteristics than that of non-preconditioned system by approximately five times as much.

Assignment of the Allowable Design Values for Domestic Softwood Structural Lumber - Structural I-grade - (국산 침엽수구조재의 허용응력설정에 관하여 - 1종 구조재를 중심으로 -)

  • Oh, Sei-Chang
    • Journal of the Korean Wood Science and Technology
    • /
    • v.24 no.1
    • /
    • pp.11-16
    • /
    • 1996
  • The purpose of this paper is to present a summary of assignment design values according to domestic softwood structural lumber grading rules. Allowable stresses for visually graded lumber were determined from basic data on small. clear specimens. The data corrected for variability such as natural defects and other factors. The procedure adopted by Japan was used for assigning allowable design values. Strength ratios in relation to each defect were taken from ASTM D 245-81. Korean pine(Pinus koraiensis S. et Z.), Korean red pine(Pinus densiflora S. et Z.), Japanese larch(Larix leptolepis Gordon) and Needle fir(Abies holophylla Max) were applied to this study. The calculated allowable stresses were same in Korean pine and Korean red pine. These values were highest in Japanese larch lowest in Needle fir. So, it is desirable for these species to be classified into different catagories Species Group. However, accurate comparison in design values on lumber grading rules among U.S., Japan and Korea was somewhat difficult. And full scale testing will be necessary for accurate determination of the correction factors to setting up design values.

  • PDF

Vegetation Structure Analysis of Urban Forest -The Case of Namsan in Kyungju- (도시림의 식생구조분석 -경주 남산을 중심으로-)

  • 이영경;최송현
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.28 no.3
    • /
    • pp.13-24
    • /
    • 2000
  • In urban area, urban forests work as an ecological center that mitigates the environmental pollution of the area. In order to maintain the ecological function of a forest, the management method should be established based on ht through investigation of the vegetation structure of the forest. In this study, the vegetation structure of Namsan in Kyungju area was investigated in order to study the ecological value of Namsan and to suggest a desirable management alternative. 21 plots were selected as survey areas. Using the TWINSPAN technique, the forest of Namsan was classified into four communities: Quercus serrata community(I), Castanea crenata-Q. serrata-Q. mongolica community(II), Pinus densiflora community(III) and P. densiflora-P. rigida-Robinia pseudoacacia community(IV). The survey results were summarized by five: 1) the distribution of vegetation showed 2) P. densiflora was the absolutely dominant species in Namsan, 3) number of the average species was 12.6$^{\circ}$$\pm$3.1, 4) number of individual was 131.1$^{\circ}$$\pm$47.8 per a plot(100$m^2$), 5) the results of annual ring analysis revealed that the age of P. densiflora in Namsan was about 3 0$^{\circ}$~60$^{\circ}$years old. From the above results, it was found out that the forest has two problems. One thing is maintenance of P.densiflora against succession, another is artificial forest dispersion. The problems of Namsan forest management will be solved with further studies related.

  • PDF

Changes in Suckling Behavioral Pattern in Fox Cubs (새끼 여우의 수유기 행동패턴 변화)

  • Chung, Chul-Un;Kim, Young-Chae;Lee, Hwa-Jin;Kim, Sung-Chul;Lee, Bae-Keun
    • Korean Journal of Environment and Ecology
    • /
    • v.27 no.6
    • /
    • pp.690-694
    • /
    • 2013
  • The aim of the present study is to obtain ecological data necessary for increasing the survival rate and effective individual management of fox cubs by analyzing the behavioral pattern during the lactation period. The subjects of the present study were baby foxes born in 2013 and taken care of at the species restoration technology institute, Korea National Park Service. Our analysis on the lactation of fox cubs and their appearance pattern outside the burrow revealed that the frequency and duration of lactation decreased with the growth of the cubs, whereas the frequency of the cubs venturing outside the den, activity time, and distance ventured increased. By the $30^{th}$ day after birth, in particular, the lactation behavior of the vixens largely decreased, and the activity of the cubs outside the den increased accordingly. Thus, for future management of the propagation of fox individuals for securing the original breed, it is necessary to increase the living food source. In addition, while capturing foxes for individual marking of cubs born in the wild, it is desirable to capture cubs older than 30 days not only for easy capture but also to minimize negative influence on the growth of the cub.

Occurrence of Lepidopteran Insects in Urban Forests (생활권 가로수를 기주로 하는 나비목 곤충의 발생양상)

  • Soojeong, Ahn;Sujin, Lee;Junheon, Kim;Youngwoo, Nam;Sunghwan, Choi;Jong-Kook, Jung
    • Korean journal of applied entomology
    • /
    • v.61 no.3
    • /
    • pp.481-496
    • /
    • 2022
  • In order to establish an effective pest control strategy, we investigated the occurrence of lepidopteran insects in the major trees growing in urban forests from 2019 to 2021. In total, we recorded 76 species of 14 families in Prunus spp., 40 species of eight families in Acer spp., 43 species of 10 families in Zelkova serrata, 28 species of seven families in Rhododendron spp., and 10 species of four families in Hibiscus syriacus. Among these, Hyphantria cunea and Lymantria dispar were recorded from all five tree taxa monitored. The most frequently occurring species in the different tree groups were as follows: H. cunea and Phalera flavescens in Prunus yedoensis, Epinotia ulmicola in Z. serrata, and Rehimena surusalis in H. syriacus. H. cunea also occurred in Rhododendron spp. and Acer spp., although the numbers were lower than those recorded in Prunus spp. and Z. serrata. Our results highlight the importance of focusing on the frequency of occurrence of lepidopteran insects in Prunus spp. and Z. serrata, whereas the presence of these insects in both Acer spp. and Rhododendron spp. Appears to be less problematic. From the perspective of reducing the risks to human health, our findings indicate that the application of pheromones for monitoring lepidopteran species and the use of mating disruptors would be desirable approaches that would contribute to minimizing the spraying of pesticides in urban forests.

Comparison of longissimus dorsi Fatty Acids Profiles in Gansu Black Yak and Chinese Yellow Cattle Steers and Heifers

  • Zhang, S. G.;Liu, T.;Brown, M. A.;Wu, J. P.
    • Food Science of Animal Resources
    • /
    • v.35 no.3
    • /
    • pp.286-292
    • /
    • 2015
  • Fatty acid (FA) composition of longissimus dorsi intramuscular fat in Black Yak and Chinese Yellow Cattle were evaluated in 44 Black Yak and 41 Chinese Yellow Cattle of both genders. Interactions of species with gender were observed for total saturated fatty acid (SFA), unsaturated fatty acid (UFA), monounsaturated fatty acid (MUFA), polyunsaturated fatty acid (PUFA), palmitic acid, stearic acid, oleic acid, linolenic acid, arachidonic acid, EPA, and DHA concentrations, as well as PUFA/SFA ratio in the longissimus dorsi (p<0.05). The SFA percentage was greater in yellow cattle than yak in both genders but the species difference in heifers was greater than in steers (p<0.05). Yak had greater UFA, MUFA and PUFA percentages than yellow cattle in both steers and heifers (p<0.05) but the difference between yak and yellow cattle heifers was greater than yak and yellow cattle steers. The percentages of inolenic acid, arachidonic acid, eicosapentaenoic acid, and docosahexaenoic acid; and PUFA/SFA were greater in yak than yellow cattle in both steers and heifers (p<0.05). In addition, the ratio of n-6/n-3 PUFA in yak was lesser than in yellow cattle (p<0.05). These results indicated that FA composition generally differed between yak and yellow cattle but the differences were not the same in heifers as compared to steers. Results also suggested that species differences in FA composition tended to favor Black Yak over Chinese Yellow Cattle, indicating that the longissimus dorsi of Black Yak may have a higher nutritive value than that of Chinese Yellow Cattle and potential for development as a desirable natural product.

Manufacture for living supplies of Chestnut wood(Castanea crenata Sieb. et Zucc)

  • Kim, Sa-Ick;Lee, Seong-An;Kim, Dong-Kooi
    • Journal of the Korea Furniture Society
    • /
    • v.20 no.6
    • /
    • pp.575-580
    • /
    • 2009
  • This study was carried out to manufacture wooden vessels by small diameter wood and wasted wood of Castanea crenata Sieb. et Zucc, which has been largely planted in southern area. We made spice set, tea box set, cookie vessel set, bowl set and accessory set. With the development of edged tools, the human species has been able to fashion wood to change and enhance its environment - one only has to look at the history of all cultures to see examples of wooden artifacts and structures. Even with the development of synthetic materials and the progress of automated, mechanized production of wood and wood products, the raw material is still processed by traditional methods to meet a never-ending demand for products made from this most desirable natural material. Chestnut wood has high added value and natural color grain and is very useful for wooden vessel. Thinned low grade trees can be used to produce wooden vessel. Therefore this result can promote thinning and produce good forestation.

  • PDF

Flame Propagation in a Micro Vessel under Excessive Heat Loss (과도한 열손실을 수반하는 초소형 정적연소실 내 화염전파)

  • Na, Han-Bee;Choi, Kwon-Hyoung;Kwon, Se-Jin
    • 한국연소학회:학술대회논문집
    • /
    • 2002.06a
    • /
    • pp.95-98
    • /
    • 2002
  • A numerical investigation on the flame propagation and extinction in a micro combustor is described. Previous measurements of $H_2-air$ flame propagation in a submilimeter scale combustor exhibited significance of wall effects on burning velocity and extinction. The heat transfer to wall becomes important not only in the cooling of burnt gases but also during the flame ropagation, which has be by and large ignored in macro scale combustor calculations. In order to take the heat loss into account the combustion calculation, we developed a numerical code with a heat transfer model that was determined empirically from measured data. PISO algorithm was used for differencing of conservation equations. $H_2-air$ reaction was modeled with 10 species - 16 steps. Comparison with measured data showed good agreement in flame propagation speed. Also the pressure decrease after flame extinction was accurately predicted by the model. A further study is desirable for a better quenching model that can predict the quenching location.

  • PDF

Optimal Processing Conditions and Concentrations for Red Pepper Powder and Crushed Garlic in the Manufacture of Squid Todarodes paxificus Sikhae (오징어(Todarodes paxificus) 식해 제조시 고춧가루 및 마늘의 발효최적 첨가량 최적 공정 개발)

  • Kim, So-Ra;Han, Dae-Won;Im, Mi-Jin;Cho, Soon-Yeong
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.45 no.6
    • /
    • pp.640-647
    • /
    • 2012
  • Squid Sikhae is a traditional salt-fermented food in Korea. We evaluated the standardization of optimal processing conditions for desirable quality-controlled squid Sikhae using analyses of physiochemical properties, microbiological species, and organoleptic tests. The optimal fermentation temperature, sun-dried sea salt concentration, and fermentation period for manufacturing squid Sikhae products of the aceeptable quality were $10^{\circ}C$, 4%, and 6 days. In addition, optimal concentrations of the additional ingredients of red pepper powder and crushed garlic for acceptable quality squid Sikhae were both 6%.

Optimal Processing Conditions of Fermentation Temperature and Sea Salt Concentration for Preparing Squid Todarodes paxificus Sikhae (오징어(Todarodes paxificus) 식해의 제조시 발효 온도 및 염도의 최적화 공정 개발)

  • Han, Dae-Won;Kim, So-Ra;Im, Mi-Jin;Cho, Soon-Yeong
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.45 no.6
    • /
    • pp.627-634
    • /
    • 2012
  • Squid Sikhae is traditional salt-fermented food in Korea. We evaluated the standardization of optimal processing conditions for desirable quality-controlled squid Sikhae using analyses of physiochemical properties, microbiological species, and organoleptic tests. Among several squid Sikhae preparation processes, the optimal fermentation temperature sun-dried sea salt concentration, and fermentation period for squid Sikhae of acceptable quality were $10^{\circ}C$, 4%, and 6 days, respectively. Amino-N and volatile basic nitrogen (VBN) contents of the acceptable quality squid Sikhae were 162.51 mg/100 g and 15.25 mg/100 g, respectively.