• 제목/요약/키워드: design wave

검색결과 3,273건 처리시간 0.034초

극치파고분포의 모수 불확실성에 따른 설계파고의 불확실성 및 피복재의 파괴확률 해석 (Analysis of Failure Probability of Armor Units and Uncertainties of Design Wave Heights due to Uncertainties of Parameters in Extreme Wave Height Distributions)

  • 이철응
    • 한국해안·해양공학회논문집
    • /
    • 제22권2호
    • /
    • pp.120-125
    • /
    • 2010
  • 재현기간에 따른 설계파고 산정시 Gumbel 극치분포함수의 축척모수와 위치모수를 확률변수로 고려할 수 있는 Monte-Carlo 모의법을 제안하였다. 축척모수의 불확실성의 정도에 따라 설계파고의 불확실성의 정도가 결정되며 그 분포형태는 Gumbel 분포함수를 따른다. 또한 내용년수에 해당하는 최대 유의파고 분포특성을 이용하여 재현기간에 따른 설계파고를 산정하는 경우에 더 많은 불확실성이 포함된다. 한편 피복재의 파괴모드에 대한 신뢰성 해석을 수행하여 설계파고의 불확실성에 대한 영향을 검토하였다. 설계파고의 불확실성을 고려하는 방법에 따라 재현기간 50년 동안 5% 피해수준에 해당하는 파괴확률을 산정하여 비교하였다. 설계파고의 불확실성이 년 최대 유의파고자료의 불확실성과 같다고 가정하면 파괴확률이 넓은 범위에 걸쳐서 산정된다.

완도 해역의 해수면 조건에 따른 파랑 변형 특성 (Characteristics of Wave Propagation by Water Level Conditions at Wando Sea Area: Numerical Modeling)

  • 전용호;윤한삼;김동환;김원석;김헌태
    • 수산해양교육연구
    • /
    • 제25권1호
    • /
    • pp.1-11
    • /
    • 2013
  • The aim of this study was estimated the characteristics of the wave propagation by the water level conditions using a numerical modeling method at the Wando sea area. For three cases numerical simulation on the condition of incident and incoming of the deepwater design wave and the season normal wave, the spatial distribution of the incident wave at study area were investigated. And the calculated numerical modeling results were compared with measured field wave data. According to on-site wave data measured for 18 days, the range of the significant wave height and period were 0.10~1.14 m, 4.35~8.74 sec, respectively, and the maximum wave height were 0.15~1.66 m. From the results of numerical model for offshore design wave incident, the wave height attacked from Southern-East direction at this study area were over maximum 10.5 m because of rapidly change of water depth. Numerical modeling by three water level conditions of Approxmate Lowest Low Water Level(Approx. L.L.W), Mean Sea Level(M.S.L) and Approximate Highest High Water Level(Approx. H.H.W) were practiced. From the results for the case of Approx. H.W.L, variations of wave height at the back area of islands were about 1.6 m at maximum value for the case of deepwater design wave incoming. The significant wave heights of winter season were bigger than summer under normal wave condition, the incident wave height over 5.5 m decreased by shielding effect of islands. The change of maximum wave height at summer season were distinct than winter and was about 1.2 m and 0.8 m, respectively.

방향성을 고려한 장기 파랑관측자료의 극치파랑조건 분석 (Analysis of Extreme Wave Conditions for Long-Term Wave Observation Data Considering Directionality)

  • 김건우
    • 해양환경안전학회지
    • /
    • 제28권5호
    • /
    • pp.700-711
    • /
    • 2022
  • 본 연구에서는 칠발도, 거문도, 동해에서 20년 이상 관측된 파랑자료를 16 방위별 극치확률분석을 통해 재현빈도별 심해설계파를 산정하였고, 이 값을 방향을 고려하지 않은 전방향파의 심해설계파와 비교하였다. Weibull 분포함수를 확률분포함수로 사용하였으며, 최소자승법을 사용해서 매개변수를 결정하였다. 추정된 분포함수는 Kolmogorov-Smirnov 방법을 사용하여 적합도를 검증하였다. 그 결과 방향별로 구한 심해설계파가 전방향파의 심해설계파보다 모든 방향에서 상대적으로 작은 것으로 나타났다. 파향별로 구한 50년 빈도 설계파고는 칠발도, 거문도, 동해에서 각각 7.46 m(NNE), 12.05 m(S), 9.69 m(SSW)가 최대값이지만, 전방향파로 구한 설계파고는 각각 7.91 m, 13.82 m, 10.38 m이었다. 이는 현재 해양 및 연안 구조물 설계에 사용하고 있는 16 방위별 심해설계파고가 과소산정되었을 가능성이 있음을 보여준다.

회절 및 수심효과를 개선한 만내설계파 모델의 적용성 검토 (Applicability of Investigation Modified Design Wave Model Considering Diffraction and Water Depth Effects)

  • 김규한;한하나
    • 한국해안·해양공학회논문집
    • /
    • 제25권6호
    • /
    • pp.349-356
    • /
    • 2013
  • 본 연구에서는 만 또는 도서지역과 같이 지형적으로 차폐되어 외해로부터 직접적인 파랑전파가 어렵고 바람에 의해 발달된 파랑의 영향이 클 것으로 판단되는 지역에 사용되는 기존 만내설계파 모델의 문제점을 분석하고 개선방안을 검토하였다. 기존 만내설계파 모델은 바람을 고려할 수 있고 타 모델에 비해 복잡한 지형에도 비교적 간편하게 사용할 수 있는 장점을 지니는 반면 인근 대형 구조물 또는 지형에 의한 파랑의 회절 및 반사 등의 고려가 곤란하다. 기존모델의 단점을 극복하기 위해 회절 및 반사각, 수심변화 등의 고려가 가능한 개량된 만내설계파 모델을 현지에 적용하고 기존 모델과 비교 검토한 결과 구조물 주변에서 설계파고의 값에 신뢰성이 향상되는 것을 확인하였다. 따라서 개선된 만내설계파 모델은 차폐되어 있는 해역에서 항만 구조물 설계 시 기존의 방법에 비해 보다 고정도의 설계파를 산정하는 방법으로서 이용될 수 있을 것으로 판단된다.

지반주기를 고려한 다층지반의 평균전단파속도 추정 방법 평가 (Evaluation of Average Shear-wave Velocity Estimation Methods of Multi-layered Strata Considering Site Period)

  • 김동관
    • 한국지진공학회논문집
    • /
    • 제23권3호
    • /
    • pp.191-199
    • /
    • 2019
  • To calculate proper seismic design load and seismic design category, the exact site class for construction site is required. At present, the average shear-wave velocity for multi-layer soil deposits is calculated by the sum of shear-wave velocities without considering of vertical relationship of the strata. In this study, the transfer function for the multi-layered soil deposits was reviewed on the basis of the wave propagation theory. Also, the transfer function was accurately verified by the finite element model and the eigenvalue analysis. Three methods for site period estimation were evaluated. The sum of shear-wave velocities underestimated the average shear-wave velocities of 526 strata with large deviations. The equation of Mexican code overestimated the average shear-wave velocities. The equation of Japanese code well estimated the average shear-wave velocities with small deviation.

초대형 컨테이너선 구조 설계를 위한 비선형 파랑하중 생성 및 적용 (Generation & Application of Nonlinear Wave Loads for Structural Design of Very Large Containerships)

  • 정병훈;류홍렬;최병기
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2005년도 특별논문집
    • /
    • pp.15-21
    • /
    • 2005
  • In this paper, the procedure of generation and application of nonlinear wave loads for structural design of large container carrier was described. Ship motion and wave load was calculated by modified strip method. Pressure acting on wetted hull surface was calculated taking into account of relative hull motion to the wave. Design wave height was determined based on the most sensitive wave length considering rule vertical wave bending moment at head sea or fellowing sea condition. And the enforced heeling angie concept which was introduced by Germanischer Lloyd (GL) classification had been used to simulate high torsional moment in way of fore hold parts similar to actual sea going condition. Using wave load generated from this dynamic load calculation, FE analyses were performed. With this result, yielding, buckling, hatch diagonal deflection and fatigue strength of hatch corners were reviewed based on the requirement of GL classification. The results of FE analysis show good compatibility with GL classification.

  • PDF

패션디자인 교육을 통한 시니어 여성의 뇌파 및 심리적 변화에 관한 연구 (A Study on Senior Woman's Psychological & Brain Wave Changes through Fashion Design Education)

  • 김은혜;이진화
    • 한국의류산업학회지
    • /
    • 제19권1호
    • /
    • pp.40-48
    • /
    • 2017
  • In this study, the impact of the fashion design education on the brain wave and the psychological change of the senior females and its change was intended to analyze. 16 senior females were selected as a subject and the brain wave and the psychology were analyzed before and after the educational program of 4 hours a day for total 3 weeks. Out of the brain wave, the increase of alpha wave represents the mental stability and the comfortable state and its decrease represents the tension and stress. On the contrary, the increase of beta wave represents the tension and the excitation. In the brain wave analysis results, the alpha wave was increased and the beta wave was decreased after the design education program, through which it is deemed that the design education would help to increase the psychological stability and to decrease the tension and the stress in the senior females. In the results of analyzing the psychological test, while the test results for 4 senior females were shown as anxious out of 16 senior females, the BAI score was decreased to 'minor anxiety' after the education and the BAI score was decreased except 2 subjects, through it is deemed that the fashion design education would help to reduce the anxiety in the senior females and it seems that it is coincided with the beta wave analysis results.

장기 파랑관측자료 분석 및 천해파 수치실험에 의한 강릉 해역의 천해설계파 (Shallow-water Design Waves at Gangreung Beach through the Analysis of Long-term Measured Wave Data and Numerical Simulation Using Deepwater Wave Conditions)

  • 정원무;전기천;김건우;오상호;류경호
    • 한국해안·해양공학회논문집
    • /
    • 제24권5호
    • /
    • pp.343-351
    • /
    • 2012
  • 본 연구에서는 강릉 해수욕장 전면에서 20년간 관측된 파랑자료의 극치분석을 통하여 재현빈도 10, 20, 30 및 50년의 천해설계파를 도출하였다. 이들을 수산청(1988) 및 한국해양연구원(2005)에 제시된 강릉 해역에 대한 재현빈도별 심해파 조건을 경계조건으로 천해파 모델인 SWAN을 사용하여 관측지점에서의 파고를 구한 값과 비교하였다. 그 결과 이러한 기존의 심해파 조건들로 계산한 강릉 해역의 천해파고는 관측치에 비해 상당히 작게 제시되었으며 그 차이는 재현빈도의 증가에 따라 커지는 것을 확인하였다. 한국해양연구원은 이전보다 상세한 격자와 WAM 모델을 사용하여 2004년 1월부터 2008년 8월까지의 역추산 자료를 생성하였으며, 이를 천해역의 관측 자료와 비교한 결과 1979~2003년의 자료에 비해 동계 폭풍파의 재현성이 크게 향상되었음을 확인하였다. 앞으로 2004년 이전에 대해서도 상세 격자와 WAM 모델을 사용한 역추산 자료의 생성 및 이를 사용한 심해파의 보완 작업이 필요한 것으로 사료된다.

불규칙파(不規則波)의 특성(特性)에 관한(關) 연구(硏究) (A Study on the Characteristic of Sea Wave)

  • 최한규;윤강훈
    • 산업기술연구
    • /
    • 제5권
    • /
    • pp.59-64
    • /
    • 1985
  • The remarkable economic growth achived during 1960-1980 in Korea inevitablely demanded the expansion and maintenance of the harbors and their auxiliary seashore facilities. One of the most important elements in the basic besign for the expasion of a harbor and its auxiliary facilities is, of course, the proper determination of the design wave which reflects the major characteristics of the seashore under consideration. In this study, the parameters of significant waves for the industrial harbors on East Coast, Muck-Ho and Po-Hang, are first computed by means of computer programming using S.M.B and P.N.J methods, respectively. Then the design waves with the return periods of 5-200 years were estimated by frequency analysis of the significant waves. A comparison of the design waves with the observed wave data during the past 10 years made it possible to determine the optimum value of design wave at the two harbors. The important results of this study can be summarized as follows; 1) It seems appropriate to take the design wave hieghts with the return period of 50 years at Muck-Ho and Po-Hang as 6.9 and 5.8 meters respectively. 2) It was found that for the determination of design waves on East Coast of Korean Peninsula P.N.J method works better than S.M.B method in predicting the significant wave, and the Log-Normal distribution fits best to the wave data which were put to frequency analysis.

  • PDF

A Tentative Methodology for Quality Control of Trackbed Fills Using Field and Laboratory P-Wave Measurements

  • Park, Chul-Soo;Park, In-Beom;Kim, Eun-Jung;Mok, Young-Jin
    • International Journal of Railway
    • /
    • 제1권2호
    • /
    • pp.64-71
    • /
    • 2008
  • The quality of track-bed fills of railways has been controlled by field measurements of density $({\gamma}_d)$ and the results of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. A new quality control procedure, in parallel with the advent of the new design procedure, is being proposed. This procedure is based upon P-wave velocity involving consistently the evaluation of design parameters in design stage and the field measurements during construction. The Key concept of the procedure is that the target value for field compaction control is the P-wave velocity determined at OMC using modified compaction test, and direct-arrival method is used for the field measurements during construction. The procedure was verified at a test site and the p-wave velocity turned out to be an excellent control measure. The specifications for the control also include field compaction water content of OMC${\pm}$2% as well as the p-wave velocity.

  • PDF