• 한국정보통신학회논문지
• /
• 제3권1호
• /
• pp.43-50
• /
• 1999

Electromagnetic wave absorbers for anechoic chamber are needed to broaden the useful frequency bandwidth, reduce the thickness, and decrease the weight. There are various absorbers proposed for the above conditions, but they could not decisively solve the above requirements. The Electromagnetic wave absorber made by a conventional ferrite tile has, for example, broadened the useful frequency bandwidth by the way of forming air layer. Therefore, an air layer is formed absorber between a reflection plate and a sintered Ni-Zn ferrite tile of 7 mm in thickness, which has reflectivity less than -20 dB from 30 MHz to 450 MHz in frequency band, far narrower than the aimed bandwidth. The purpose of this paper is on the development of a universal anechoic chamber for measuring radiated electromagnetic wave or immunity of electronic equipments, GTEM-cell, wall material for prevention of TV ghost, etc. Accordingly, in this paper, a broadened electromagnetic wave absorber is designed, which has the reflection characteristics less than -20 dB from 30 MHz to 5,430 or 8,000 MHz in the bandwidth. Then we will design a super broadband electromagnetic wave absorber by inserting square Ferrite Cylinders Type with the thickness less than 23.5 m in three-layed type and with the frequency band from 30 MHz to 5,430-8,000 MHz under the above tolerance limits.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권3호
• /
• pp.177-185
• /
• 2012

본 논문은 완도 금일읍 주변 해역의 내습 파랑 공간분포를 살펴보기 위해 18일간 현장 파랑관측을 실시하고 이를 외해 거문도 해양관측부이 자료와 비교하였으며, 수치모의를 통해 심해 설계파 및 계절별 평상 파랑 내습에 따른 양식장 주변의 입사파고 분포를 고찰하였다. 이를 통해 얻어진 결과를 요약하면 다음과 같다. (1) 현장 파랑관측을 실시한 결과, 최대파고와 유의파고의 관계식 $H_{max}=1.6H_{1/3}$에 근접하는 파랑이 다수를 나타내었다. (2) 외해 입사 파랑에너지가 연안까지 도달함에 있어서 바람의 방향에 따라서 크게 영향을 받고 있으며, N계열의 풍향은 입사 파랑에너지의 감소에, S계열 풍향은 입사파랑에너지 전달에 영향을 주고 있음을 알 수 있었다. (3) 금일읍(평길도와 생길도) 전면해역에서 최대 심해설계파고가 4~5 m이며 파고감소율은 약 38.1~47.6%, 평상파랑의 경우 하계 3.6~4.0 m, 동계 2.3~2.7 m로 나타나 파고감소율은 41.8~49.1%에 해당하였다. (4) 평길도와 생길도 남측의 경우 해양파랑의 영향이 가장 크고, 섬의 북측 청도 수도 해역이 가장 정온한 상태를 나타내었으며, 두 해역간 유의파고비는 약 6배의 차이를 나타내었다.

• 한국의류산업학회지
• /
• 제8권4호
• /
• pp.441-448
• /
• 2006

This research is the hair damage as treating a permanent wave before and after that is compared and analyzed the change of physical and mechanical properties. This is the survey of women's hair in 20 years old. On the basis of this we would like to analyze a extend of hair damage. Also, we would to show a basic data for hair damage prevention and hair improvement to keep the beautiful and healthy hair. The conclusion is as follow. : The swelling degree after the treatment was found to be greater than before permanent wave treatment. For the formational characteristics wave, untreated hair certainly had more elastic S curl wave than damaged hair in all the permanent wave treatments, and damaged hair and extremely damaged hair had less elasticity and had saggy S curl wave. The protein permanent and soft permanent wave had thicker, gorgeous, and better elastic wave than the regular permanent wave and direct heating permanent wave in all the hair condition. As the degree of damage on hair got greater, the tensile strength dramatically decreased and as the degree of damage got greater, the elongation was great as well. For treatment method, direct heating permanent wave showed the greatest effect, causing the most damage.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권8호
• /
• pp.704-709
• /
• 2016

Wave energy generation systems can be divided into oscillating water chamber type, over topping device type and wave activating body type. The wave activating body type converts wave energy to kinetic energy, and the power generation amount increases as the motion of an activating body increases. In this paper, the wave energy convertor consists of a main body, which has an H-shape, and the activating body. These are connected by a bar-type bridge. By the incident wave, when the activating body moves with vertical motion this motion is consequently converted into rotational motion. The twisting moment and angular velocity at a shaft of convertor are calculated according to various conditions of the incident wave and the shape of the activating body. This can be used as a basic idea for determining the design of wave activating body type convertor.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.43-49
• /
• 2006

Detailed investigations were carried out on the stability of the dredged soil bed against wave actions, aimedat establishing the design method of artificial tidal flats using dredged soil. The soil was dredged at Nagoya port, Japan, and has a mean grain size of 0.013mm. Basic features of artificial dredged soil bed against wave actions were explained from a series of model experiments in a wave flume. The two types of section shapes were employed; one is a horizontal bed and the other is a sloped one. Changes of the bed profile, shear strength, grain size distribution and water content, according to the wave actions, were measured in detail. The cumulative effect of the wave actions, over about one week, was investigated. A dredged soil bed moves withthe wave actions with relatively small wave height. It should be especially. noted that the clay component is dissolved and flown out, away from the surface layer, and consequently the surface layer hardens, as if it is covered with sand. Wren the wave height is gradually increased, the bed is not liquefied and the shear strength of the dredged bed is increased by a wave-induced dissipation of pore pressures in the bed and a decrease of clay component by the wave-induced leakage.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.9-16
• /
• 2006

A new wave-absorbing system, called the liquefied sandbed wave barrier (LSWB) system, is currently under development at the Port and Airport Research Institute (PARI) of Japan. The wave damping effect by the LSWB system is substantial, as confirmed by small-scale experiments and FEM numerical calculations, i.e., the wave transmission coefficient of the system is less than 0.2. Here, the results of large-scale experiments arediscussed in view of practical application. Although the LSWB system provides high wave damping, nearly equal to theoretical values, difficulty exists in obtaining a homogeneously liquefied sandbed, due to the occurrence of liquefied sandbed compaction by cyclic wave loading, which in turn, reduces excess pare pressure and the wave damping effect. These two phenomena primarily occur when the sandbed is composed of fine sand with small permeability. Based on experimental results, we propose a design method that includes countermeasures against such problems, and a prototype LSWB system is constructed in a very large wave flume at PARI. Wave damping by the prototype LSWB system is confirmed to be quite stable and high, as predicted by theoretical calculations.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1221-1229
• /
• 2022

In this work, the guided wave de-bonding area-detecting technique was studied for application to containment liner plates in nuclear power plant areas. To apply this technique, an appropriate Lamb wave mode, symmetric and longitudinal dominance, was verified by the frequency shifting technique. The S0 2.7 MHz mm Lamb wave mode was chosen to realize quantitative experimental results and their visualization. Results of the bulk wave, longitudinal wave mode, and comparison experiments indicate that the wave mode was able to distinguish between the de-bonded and bonded areas. Similar to the bulk wave cases, the bonded region could be distinguished from the de-bonded region using the Lamb wave approach. The Lamb wave technique results showed significant correlation to the de-bonding area. As the de-bonding area increased, the Lamb wave energy attenuation effect decreased, which was a prominent factor in the realization of quantitative tomographic visualization. The feasibility of tomographic visualization was studied via the application of Lamb waves. The reconstruction algorithm for the probabilistic inspection of damage (RAPID) technique was applied to the containment liner plate to verify and visualize the de-bonding condition. The results obtained using the tomography image indicated that the Lamb wave-based RAPID algorithm was capable of delineating debonding areas.

• 한국기계연구소 소보
• /
• 통권9호
• /
• pp.153-167
• /
• 1982

From first-order thin-ship theory, we can obtain the" wave resistance, wave amplitude functions, wave elevation along the hull, sinkage and trim of a ship moving with constant speed into calm water. Generally, these calculations of ship is called with Michell’s Theory, and there is all the difference between calculated wave resistance and residual resistance from conventional wave resis¬tance test. But, these calculated results are important reference materials for initial hull form design procedure. Various calculated results for Shearer’ s Model, Wigley’s Model and Series 60 4210W Model have been calculated using this theory. The results are compared with the corresponding experimental values, and the agreement between theoretical and experimental values is considered satisfactory.

• 반도체디스플레이기술학회지
• /
• 제6권4호
• /
• pp.43-47
• /
• 2007

In this paper, we propose a novel sensor system for measuring the arterial pulse in an oral cavity. In order to measure pulse wave in oral cavity, the proposed system is designed with reflection type arterial wave sensor, not by using transmission type arterial pulse wave sensor. Driving circuit through pulse current is designed for solving self-heating problem of LED. The effectiveness of the proposed sensor system is compared with pulse wave between pulse wave of oral cavity and other body parts as well as with characteristic measurements. The experiment shows that the proposed sensor system is adaptive to capturing consecutive and meaningful biometric signals through the variation of pulse wave changes in oral cavity when exercising. The study result expects to design and develop mobile sensors which could be adapted to healthcare devices.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.158-161
• /
• 2006

The purpose of this research is to establish the crosstalk characteristic of mm-wave Coplanar structure. The components in mm-wave CPW are classified to transmission devices, EM devices, and quasi - TEM devices. After design of these devices, we analyzed these CPW s electromagnetically using FDTD method, and suggested the corsstalk characteristic of mm-wave CPW. In oder to realize a CPW module up to 30 GHz-100 GHz band, we research on a technology of 3-dimensional mm-wave CPW, and GaAs substrate with ohmic lossy layer. As a result this research, we suggested the optimum crosstalk characteristic of mm-wave CPW, and improved the crosstalk quality of mm-wave CPW.