• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1583-1593
• /
• 2002

This paper discusses the model validation and vibration suppression of an AMB flexible rotor via additional LQG controller. The main difficulty in the vibration suppression of the flexible rotor using AMB is to realize a controller that can minimize resonance without injuring the stabilized rigid modes. In order to solve this problem, simple scheme for system modeling and controller design are developed. Firstly, the AMB flexible rotor is stabilized with a PID controller, which leads to a new stable rotor-bearing system. Then, authors propose the model validation procedure using measured open-loop frequency responses to obtain an accurate model of the AMB flexible rotor system. After that, LQG controller with modal weighting is designed to suppress resonances of the stable rotor-bearing system. Due to the poor controllability and observability of flexible modes compared to rigid ones, balancing of two Gramians is prerequisite for the fair LQG controller design. Simulation with step disturbance and experimental results of unbalance response up to 10,000 rpm verified the effectiveness of the proposed scheme.

• 컴퓨터교육학회논문지
• /
• 제5권4호
• /
• pp.31-42
• /
• 2002

본 논문에서는 통신 프로토콜 개발 시 사용되는 PDU, SDU, SAP, 서비스 프리미티브를 어떻게 정의하고 사용하는지에 대한 명확한 설계 개념과 검증 방법을 ITU에서 통신 규격 및 설계 언어로 권고하고 있는 SDL과 국제 통신 표준 언어인 ASN.1, MSC, TTCN을 사용하여 정립한다. 통신 프로토콜의 예로 잘 알려진 Inres 프로토콜을 확장하여 SDL로 설계하며, SDL의 설계 규격에 비트 스트링 전송을 위한 ASN.1 메시지의 삽입, 규격에 대한 설계 검증을 위한 MSC의 생성, 검증으로부터 TTCN을 이용한 시험 케이스의 생성 및 적합성 시험 등 프로토콜 개발 순기 전반에 걸친 개발 방법론을 정립한다.

• Steel and Composite Structures
• /
• 제6권5호
• /
• pp.367-386
• /
• 2006

This paper describes the results of a numerical investigation of the large deflection behaviour of steel beams under fire conditions, taking into consideration the effect of catenary action provided by the surrounding structures. The main focus is on the development, validation and application of a simplified calculation method that may be adopted in design calculations. Because no experimental result is available for validation of the simplified calculation method, the finite element program ABAQUS has been used to simulate the large deflection behaviour of a number of steel beams so as to provide alternative results for validation of the proposed method. Utilising catenary action has the potential of eliminating fire protection to all steel beams without causing structural failure in fire. However, practical application of catenary action will be restricted by concerns over large beam deflection causing integrity failure of the fire resistant compartment and additional cost of strengthening the connections and the surrounding structures to resist the catenary forces in the steel beams. This paper will provide a discussion on practical implications of utilising catenary action in steel beams as a means of eliminating fire protection. A number of examples will then be provided to illustrate the type of steel framed structure that could benefit the most from exploiting catenary action in fire resistant design.

• Wind and Structures
• /
• 제11권1호
• /
• pp.51-70
• /
• 2008

CFD is applied to evaluate pedestrian wind comfort at outdoor platforms in a high-rise apartment building. Model validation is focused on generic building sub-configurations that are obtained by decomposition of the actual complex building geometry. The comfort study is performed during the design stage, which allows structural design changes to be made for wind comfort improvement. Preliminary simulations are performed to determine the effect of different design modifications. A full wind comfort assessment study is conducted for the final design. Structural remedial measures for this building, aimed at reducing pressure short-circuiting, appear to be successful in bringing the discomfort probability estimates down to acceptable levels. Finally, the importance of one of the main sources of uncertainty in this type of wind comfort studies is illustrated. It is shown that the uncertainty about the terrain roughness classification can strongly influence the outcome of wind comfort studies and can lead to wrong decisions. This problem is present to the same extent in both wind tunnel and CFD wind comfort studies when applying the same particular procedure for terrain relation contributions as used in this paper.

• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.345-352
• /
• 2014

본 논문에서는 아이소-지오메트릭 형상 최적설계 기법에서 얻은 CAD 정보를 직접 활용하여, 3D 프린터를 활용한 실험적 검증을 위한 시편을 제작하였다. 유한요소법에서는 요소망에 내재하는 기하학적인 근사가 응답과 설계민감도 해석에서 정밀도 문제를 발생시킨다. 더욱이 유한요소 기반 형상 최적화 과정에서는 CAD와의 정보교환이 필수적이나 그 과정에서 최적설계 정보의 손실이 발생할 수 있다. 아이소-지오메트릭 기법은 CAD에서 사용된 동일한 NURBS 기저함수와 조정점을 사용하므로 법선벡터와 곡률과 같은 엄밀한 기하학적 정보를 응답해석과 설계민감도 해석에 사용할 수 있다. 또한 최적설계 과정에서 CAD와 정보교환 없이 복잡한 형상을 손쉽게 변경할 수 있다. 그러므로 최적의 설계의 재료량을 실험적 검증을 위한 시편제작에 엄밀하게 반영할 수 있다. 굽힘 하중을 받는 단순지지 구조물에 대한 최적설계 및 실험적 검증을 통해 최적형상이 초기 형상에 비해 더 큰 강성을 가지며 실험결과와 수치 해석결과가 매우 잘 일치함을 보였다. 또한 인장력을 받는 유공판에 대한 형상 최적설계를 수행하였으며, 비접촉식 3차원 변형 측정 장치를 이용하여 초기설계에 비해 최적설계에서 구멍주변에서의 응력집중 현상이 완화됨을 확인하였다. 따라서 수치적인 방법을 활용한 최적설계가 실제 구조물에 대한 실험에서도 유효함을 입증하였다고 할 수 있다. 또한, 아이소-지오메트릭 최적설계 방법론이 기존의 유한요소법에 비해서 최적설계 결과를 제작하여 활용하는데 있어서도 훨씬 효율적이고 엄밀한 방법임을 보였다.

• 인터넷정보학회논문지
• /
• 제17권5호
• /
• pp.131-139
• /
• 2016

This paper presents a workflow validation method for data-intensive graphical workflow models using real-time workflow tracing mode on data-intensive workflow designer. In order to model and validate workflows, we try to divide as modes have editable mode and tracing mode on data-intensive workflow designer. We could design data-intensive workflow using drag and drop in editable-mode, otherwise we could not design but view and trace workflow model in tracing mode. We would like to focus on tracing-mode for workflow validation, and describe how to use workflow tracing on data-intensive workflow model designer. Especially, it is support data centered operation about control logics and exchange variables on workflow runtime for workflow tracing.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1146-1151
• /
• 2013

This paper deals with design consideration and validation of a new pole-slot combination for permanent magnet vernier machine (PMVM) with consequent pole (CP) rotor especially for extremely low speed servo applications. A 136pole-24slot PMVM with CP rotor is introduced and analyzed by 2D and 3D finite element analysis (FEA) and discussion on experimental validation is also included.

• 대한기계학회논문집B
• /
• 제24권12호
• /
• pp.1625-1634
• /
• 2000

Verification of measurements is required for precise evaluation of turbine cycle performance in nuclear power plant. We assumed that initial acceptance data and design data of the plant could provide correlation information between performance data. The data can be used as sample sets for the correct estimation model of measurement value. The modeling was done practically by using regression model based on plant design data, plant acceptance data and verified plant performance data of domestic nuclear power plant. We can construct more robust performance analysis system for an operation nuclear power plant with this validation scheme.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.50-67
• /
• 2000

The spacecraft simulator is used for command validation, operational check of the Satellite Operation Subsystem (SOS), spacecraft anomaly analysis support, satellite operator training etc. In this paper, S/W design features and modeling characteristics of the KOMPSAT Spacecraft Simulator Subsystem (SIM) are described. Validation procedures and simulation results are also provided. The SIM provides extensive simulation capabilities by including models for most of the spacecraft subsystems. The software structure of the SIM was designed and implemented so as to support operations not only in real-time but also in non real-time by utilizing the Hewlett Packard (HP) UNIX functions. The SIM incorporates as many user-friendly Man Machine Interface (MMI) windows as possible so that all the SIM normal operations can be executed through the MMI windows.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권8호
• /
• pp.972-979
• /
• 1999

QFT(Quantitative Feedback Theory) is a very practical design technique that emphasizes the use of feedback for achieving the desired system performance tolerances in despite of plant uncertainty and disturbance. The fundamental concept of QFT is a loop shaping procedure that a suitable controller can be found by shaping a nominal loop transfer function. The loop shaping synthesis involves the identification of a structure and the specialization of parameter optimization of a desired system. This paper presents an improved loop shaping approach of QFT with model validation using GA(Genetic Algorithm). The method presented in this paper removes the problems of iterative operation, transformation error, and model validation in the conventional methods without consideration of frequency domain.