• Journal of Korean society of Dental Hygiene
• /
• v.11 no.4
• /
• pp.489-497
• /
• 2011

Objectives : Based on data collected from patients who suffered from dental caries during the period between 1990 and 2008, the number of patients and their trends were analyzed as a source of evidence to conduct the oral health plan. Methods : A population of sample design for patient survey data was derived from computerized data saved at medical institutions accredited by National Health Insurance Corporation. Large institutions such as dental hospitals were included for the complete enumeration test, while the rest of medical institutions, for example, dental clinic, relatively small institutions, were used for the sample survey. Most of patients with dental caries were outpatients and their disease was treated at the dental hospital or dental clinic in general, therefore, main analysis was carried out at those institutions. Results : The rate of patients who suffered the dental caries has decreased to 56.8% in 2008 from 78.5% in 1990. The rate of patients who visited the dental hospital for treatment has increased to 4.8% in 2008 from 0.5% in 1990, whereas the percentage of those who visited the dental clinic has fallen to 97.9% from 99.5% during the same period. The ratio by age, in the meantime, it showed that patients aged 40s has increased to 13.5% in 2008 from 7.2% in 1990, and the number also has risen in 50s from 5.6% in 1990 to 9.9% in 2008. However, the number of children aged 0 to 9 who visited hospital for treatment of dental caries has fallen to 17.0% in 2008 from 33.9% in 1990. Conclusions : By figuring out the trends of patients with the dental caries during the period between 1990 and 2008, fundamental data for the oral health policy have been collected. As a result, the necessity of a new medical treatment system for managing the dental caries in terms of patient ages as well as the oral health policy and campaign was taken into consideration.

• Design & Manufacturing
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2017

In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.288-293
• /
• 2016

Purpose: The purpose of this study was to investigate the key factors in designing a three-wheeled two-row soybean reaper (riding type) that is suitable for soybean production, and ensure worker safety by proposing optimal work conditions for the prototype of the designed machine in relation to the slope of the road. Methods: A three-wheeled two-row soybean reaper (riding type) was designed and its prototype was fabricated based on the local soybean-production approach. This approach was considered to be closely related to the prototype-designing of the cutter and the wheel driving system of the reaper. Load distribution on the wheels of the prototype, its minimum turning radius, static lateral overturning angle, tilt angle during driving, and The working and rear overturning (back flip) angle were measured. Based on the gathered information, investigations were conducted regarding optimal work conditions for the prototype. The investigations took into account driving stability and worker safety. Results: The minimum ground clearance of the prototype was 0.5 m. The blade height of the prototype was adjusted such that the cutter was operated in line with the height of the ridges. The load distribution on the prototype's wheels was found to be 1 (front wheel: F): 1.35 (rear-left wheel: RL): 1.43 (rear-right wheel: RR). With the ratio of load distribution between the RL and RR wheels being 1: 1.05, the left-to-right lateral loads were found to be well-balanced. The minimum turning radius of the prototype was 2.0 m. Such a small turning radius was considered to be beneficial for cutting work on small-scale fields. The sliding of the prototype started at $25^{\circ}$, and its lateral overturning started at $39.3^{\circ}$. Further, the critical slope angle for the worker to drive the prototype in the direction of the contour line on an incline was found to be $12.8^{\circ}$, and the safe angle of slope for the cutting was measured to be less than $6^{\circ}$. The critical angle of slope that allowed for work was found to be $10^{\circ}$, at which point the prototype would overturn backward when given impact forces of 1,060 N on its front wheel. Conclusions: It was determined that farmers using the prototype would be able to work safely in most soybean production areas, provided that they complied with safe working conditions during driving and cutting.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.313-318
• /
• 2016

Purpose: This study measured and analyzed the PTO (power take off) torque of a transplanter according to the planting conditions during field operation. Methods: A torque measurement system was constructed with torque sensors to measure the torque of a PTO shaft, a measurement device to acquire sensor signals, and a power controller to provide power for a laptop computer. The field operation was conducted at four planting distances (26, 35, 43, and 80 cm) and two planting depths using the transplanter on a field with similar soil conditions. One-way ANOVA with planting distance and Duncan's multiple range test at a significance level of 0.05 were used to analyze the PTO torque. The torque ratio was calculated based on the minimum torque using the average PTO torque measured under each planting condition. Results: The average torques on the PTO shaft for planting distances of 26, 35, 43, and 80 cm at a low planting depth were 11.05, 9.07, 7.04, and 3.75 Nm, respectively; the same for planting distances of 26, 35, 43, and 80 cm at a middle planting depth were 12.20, 9.86, 7.94, and 4.32 Nm, respectively. When the planting distance decreased by 43, 35, and 26 cm, the torque ratio at a low planting depth increased by 88, 142, and 195%, respectively. When the planting distance decreased by 43, 35, and 26 cm, the torque ratio at the middle planting depth increased by 84, 128, and 182%, respectively. Conclusions: PTO torque fluctuated by planting distance and depth. Moreover, the PTO torque increased for short planting distances. Therefore, farmers should determine the planting conditions of the transplanter by considering the load and durability of the machine. The results of this study provide useful information pertaining to the optimum PTO design of the transplanter considering the field load.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.6-16
• /
• 2008

An instable wireless channel condition causes more packet losses and retransmissions due to interference, fading, station mobility, and so on. Therefore video streaming service over a wireless networks is a challenging task because of the changes in the wireless channel conditions and time-constraints characteristics of the video streaming services. To provide efficient video streaming over a wireless networks, QoS-enhanced MAC protocol, IEEE 802.11e, is standardized recently. Tn this paper, we propose a new network-adaptive H.264 video streaming mechanism in the IEEE 802.11e wireless networks. To improve the quality of video streaming services, video stream has to adapt to the changes in the wireless channel conditions. The wireless channel conditions are estimated by the packet loss probability and informed to the application layer by the cross-layering. According to the wireless channel information, the video streaming application filters out the low-priority data. This adaptation mechanism efficiently uses system resources because it drops the low-priority data in advance. Therefore, our cross-layer design can provide improved video streaming services to the end-user. Through the implementation and performance evaluation, we prove that the proposed mechanism improves the QoS of the video streaming by providing the smoothed playback.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.901-908
• /
• 2011

For the available grid environmental realization, the resource supply PC must have to provide an appropriate security function of their operation environments. SKY@HOME is a kind of the grid computing environments. If this has not supervised by administrator handling smoothly, it is inherently vulnerable state to the security level of the grid environments, because the resource supply PC is not update a security function without delay. It is also have the troublesome problems which have to install of an additional security program for support the appropriate security. This paper proposes an integration security model on the policy-based that provides an update each level according to the situation of the resource supply PC for improving its problems as a security aspect of the SKY@HOME. This model analyzes the security state of the resource supply PC respectively, and then the result is available to provide an appropriate security of the resource supply PC using an integration security model. The proposed model is not need additionally to buy and install the software, because it is provided the security management server oriented service. It is also able to set up the suit security function of a characteristic of the each resource supply PC. As a result, this paper clearly show the participation of resource supply PC improved about 20%.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.73-80
• /
• 2011

The radiation shielding analysis for a Burnup-credit (BUC) cask designed under the management of Korea Radioactive Waste Management Corporation (KRMC) was performed to examine the contribution of each radiation source affecting dose rate distribution around the cask. Various radiation sources, which contain neutron and gamma-ray sources placed in active fuel region and the activation source, and imaginary nuclear fuel were all considered in the MCNP calculation model to realistically simulate the actual situations. It was found that the maximum external and surface dose rates of the spent fuel cask were satisfied with the domestic standards both in normal and accident conditions. In normal condition, the radiation dose rate distribution around the cask was mainly influenced by activation source ($^{60}Co$ radioisotope); in another case, the neutron emitted in active fuel region contributed about 90% to external dose rate at 1m distance from side surface of the cask. Besides, the contribution level of activation source was dramatically increased to the dose rates in top and bottom regions of the cask. From this study, it was recognized that the detailed investigation on the radiation sources should be performed conservatively and accurately in the process of radiation shielding analysis for a BUC cask.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.233-242
• /
• 2018

To overcome the low mechanical strength and corrosion behavior of a carbon steel canister at high temperature condition of a deep borehole, SiC ceramics were studied as an alternative material for the disposal canister. In this paper, a design concept for a SiC canister, along with an outer stainless steel container, was proposed, and its manufacturing feasibility was tested by fabricating several 1/3 scale canisters. The proposed canister can contain one PWR assembly. The outer container was also prepared for the string formation of SiC canisters. Thermal conductivity was measured for the SiC canister. The canister had a good thermal conductivity of above $70W{\cdot}m^{-1}{\cdot}K^{-1}$ at $100^{\circ}C$. The structural stability was checked under KURT environment, and it was found that the SiC ceramics did not exhibit any change for the 3 year corrosion test at $70^{\circ}C$. Therefore, it was concluded that SiC ceramics could be a good alternative to carbon steel in application to deep borehole disposal canisters.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.115-124
• /
• 2018

Resilience has been widely used in various fields including design and operation of infrastructures. The resilient infrastructures not only reduce the damage scale of various disasters but also reduce the time and cost required for restoration. However, resilience rarely applied to promote efficient management of agricultural infrastructures. Recently, drought is an aggravating disaster by climate change and need countermeasures. Therefore, we tried to demonstrate evaluating measures in case of drought under consideration of resilience. This study applied the robustness-cost index (RCI) to evaluate alternative solution of the supply problem of a large agricultural reservoir under drought conditions. Four structural alternatives were selected to estimate the robustness index (RI) and the cost index (CI) to obtain the RCI values. Structural alternatives are classified into temporary measures and permanent measures. Temporary measures include the development of a tube wells and the installation of the portable pump, while the permanent measures include the installation of a pumping stations and the pumping water to the reservoir (Yeongsan River-Naju reservoir). RCI values were higher in permanent measures than those of temporary measures. Initial storage of the reservoir also affected RCI values of the drought measures. Permanent measures installation and management of early stage of the reservoir storage shortage was identified as the most resilient system.

• The KIPS Transactions:PartD
• /
• v.18D no.4
• /
• pp.261-274
• /
• 2011

In recent competitive business environment each enterprise has to be agile and flexible. For these purposes run-time monitoring ofservices provided by an enterprise and early decision making through this becomes core competition of the enterprise. In addition, in order to process various innumerable events which are generated on enterprise systems techniques which make filtering of meaningful data are needed. However, the existing study related with this is nothing but discovering of service faults by monitoring depending upon API of BPEL engine or middleware, or is nothing but processing of simple events based on low-level events. Accordingly, there would be limitations to provide useful business information. In this paper, through situation detection an extended complex event model is presented, which is possible to provide more valuable and useful business information. Concretely, first of all an event processing architecture in an enterprise system is proposed, and event meta-model which is suitable to the proposed architecture is going to be defined. Based on the defined meta-model, It is presented that syntax and semantics of constructs in our event processing language including various and progressive event operators, complex event pattern, key, etc. In addition, an event context mechanism is proposed to analyze more delicate events. Finally, through application studies application possibility of this study would be shown and merits of this event model would be present through comparison with other event model.