• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.201-207
• /
• 2007

At an early design stage of rail track, dynamic analyses using a standard vehicle model of ADAMS/Rail are employed. In the real field, it is very difficult to find an optimal solution on the designing of rail track considering future operating vehicles because the construction of rail track should be done in the advance of vehicle selection and operation. Using a standard vehicle model of ADAMS/Rail, however the better selection among designed rail tracks is possible by comparing the dynamic analysis.

• 한국산업융합학회 논문집
• /
• 제26권2_1호
• /
• pp.239-248
• /
• 2023

In this paper, we conduct a study on the design that can secure the safety of the EPLA system by performing safety activities based on the ISO 26262 standard for vehicle functional safety. In the case of a company developing a detailed system, it is responsible for verification through hardware design and safety analysis in the overall flow of safety activities, and safety analysis according to the ASIL safety level must be properly performed. At this time, there are cases where the safety goal quantitative metric value suggested by the ISO 26262 standard cannot be satisfied only by the hardware design of the basic function, so it is necessary to design and install the safety mechanism. Based on ISO 26262 safety activities, it is possible to derive an effective design plan through hardware safety analysis.

• 전산구조공학
• /
• 제10권3호
• /
• pp.203-216
• /
• 1997

본 논문에서는 실무에서 이동 집중하중에 대한 별도의 복잡한 구조해석을 수행하지 않고도 등분포하중에 대한 부재력으로부터 손쉽게 차량하중의 영향을 고려한 거더와 보 부재의 설계 부재력을 구할 수 있도록 등가차량하중계수를 제안하였다. 먼저 국내에서 생산되는 중,소형 차량의 조사와 외국의 주차장 관련 설계규준의 비교, 검토를 통해 주차장 구조물의 한계 활하중인 총중량 2.4ton의 설계기준차량을 설정하였으며, 이를 토대로 설계 활하중인 등분포하중(500kg/m/sup 2/)과 집중하중(P=2.4ton)에 대한 구조부재의 거동 특성을 분석하고 회귀분석을 통해 상호 관계식을 부재 길이의 함수로 구성하였다. 나아가 제안된 등가차량하중계수를 대표적인 보와 거더 부재에 적용시켜 그 효율성과 신뢰성을 검증하였다.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.37-45
• /
• 2013

PURPOSES: This study is to analyze different vehicle load effects for a bridge design of South and North Korea in order to prepare a common design specification and to secure the safety of transportation when the highway bridges of South and North Korea use together. METHODS: Based on the literature review, this study considers vehicle load effects by comparing different characteristics of the standard vehicle and other differences of the bridge design specification between South and North Korea. And structural modeling of three-span continuous PSC Beam Bridge are analyzed and the bridge capacity according different vehicle loads of South and North Korea is evaluated. RESULTS: The result of this study indicates that the bridge capacity and the design vehicle weight of North Korea are smaller than the bridge capacity and the design vehicle weight of South Korea. Also this study demonstrates that the design vehicle array and other characteristics of North Korea are very different than the design vehicle array and other characteristics of South Korea. CONCLUSIONS: It is expected that the outcomes of this study can be useful in the set-up of South-North Bridge Specification because similar previous studies are rarely found.

• Structural Engineering and Mechanics
• /
• 제9권3호
• /
• pp.305-321
• /
• 2000

This paper develops a simplified, but effective, algorithm in obtaining critical slab design moments for parking garages. Maintaining the uniformly distributed load concept generally adopted in the design of building structures, this paper also introduces the equivalent vehicle load factors, which can simulate the vehicle load effects without taking additional sophisticated numerical analyses. After choosing a standard design vehicle of 2.4 tons through the investigation of small to medium vehicles made in Korea, finite element analyses for concentrated wheel loads were conducted by referring to the influence surfaces. Based on the obtained member forces, we determined the equivalent vehicle load factors for slabs, which represent the ratios for forces under vehicle loads to these under uniformly distributed loads. In addition, the relationships between the equivalent vehicle load factors and sectional dimensions were also established by regression, and then used to obtain the proper design moments by vehicle loads. The member forces calculated by the proposed method are compared with the results of four different approaches mentioned in current design codes, with the objective to establish the relative efficiencies of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.540-545
• /
• 1993

When modeling an underwater vehicle uncertainty arises in the presence of unsteady flow. It is difficult to include the uncertainty in the model and is therefore desirable to investigate robust controller design methods for the underwater vehicle. In the paper two robust control methods are applied for the underwater system. One is standard H$_{\infty}$ control and the other is time-varying sliding mode control with modified saturation function. Suboptimal design parameters for H$_{\infty}$ control and design parameters for time-varying switching surfaces are provided. Simulations and comparison are carried out.t.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.975-979
• /
• 2008

Since tram has the advantages to reduce construction cost of infrastructure, to improve accessibility of passengers, and to offer visual pleasures, nowadays, it is one of light rails attracting public attention. Tram can be classified into two groups, one is a conventional steel-wheeled type, and the other is a rubber-tired type (bi-modal tram). The bi-modal tram propelled by the serial CNG hybrid propulsion unit has been developing since 2003 in Korea, which can realize both scheduled operation of railway and route flexibility of bus. Because the bimodal will be operated on both railway mode and bus mode, however, specific criteria and regulations for its design, certification, construction, operation and maintenance have not been determined definitely yet. In consideration of mobility enhancement for the old and the handicapped, motor vehicle safety standard and urban transit (railway vehicle) safety standard, several design specifications were proposed for car body and interiors of the bimodal tram vehicle. The design specifications proposed in this paper can be expected to promote passengers' comfort and safety, operation efficiency of the bimodal tram.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.27-33
• /
• 2020

In this paper, the process of predicting efficient durability performance for vibration durability test of automobile parts using vibration test load on automobile fuel tank is presented. First of all, the common standard load that can be applied to the initial development process of the automobile was used for the fuel tank and the vulnerability of the fuel tank to the vibration fatigue load was identified through frequency response analysis. In addition, the vulnerability of the fuel tank was re-enacted through vibration durability test results, and the scale factor was applied to the standard load. In order to predict the vibration durability performance required for detailed design, vibration fatigue analysis was performed on the developed vehicle with the frequency of vibration severity equivalent to the durability test, and the vulnerability and life span of the fuel tank were identified through the process of applying weights to these selected standard loads, thereby reducing the test time of the development vehicle.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2005년도 춘계학술대회
• /
• pp.302-305
• /
• 2005

To comply to demand for a development requirement of aircraft design part, the expert system builds up standard knowledge-base based on presently maintained expert knowledge and experience in aircraft structure material selection. It also builds up database based on aircraft design open data, and standard calculation module used for present design and analysis method. This system is developed using Visual Basic language. The expert system standardize aircraft structure material selection and can be applied to all type of elementary stage of aircraft structure design. It is working on Windows, which has a friendly interface and is convenient for debugging, maintenance and transplanting. Explanation of the structure and the function of the system was given in this paper.

• 디자인학연구
• /
• 제13권3호
• /
• pp.59-68
• /
• 2000

이 논문은 21세기의 자동차 디자인에 요구되어지는 디자인의 정신성을 씨티 커뮤터(City Commuter) 자동차를 중심으로 고찰한 것이다. 먼저 지난 한 세기의 자동차 디자인 변천에 대한 정리를 통해 자동차 조형 변화의 흐름을 정리하였다. 자동차가 발명된 이후 인간 생활의 질적 향상을 가져다준 많은 플러스 요인들이 있었음에도 불구하고 자동차로 인해 인간다운 생활에 위협을 주는 역기능이 동시에 존재하고 있음을 상기함으로서 21세기의 자동차는 더 이상 인간의 삶에 위협이 되거나 지구 환경오염의 주범이 되어서는 안 된다는 점을 강조하였다. 2000년대 초기의 자동차 개발 방향의 핵심인 복고디자인, 하이브리드 그리고 소형자동차의 개발은 과연 이러한 요구에 합당한 것인가라는 질문을 전제로 운송시스템과의 연계 수단이 될 수 있을 뿐만 아니라 가장 인간과 환경에 친화적인 컨셉트인 씨티커뮤터(City Commuter) 자동차에 대한 개발 및 연구 사례를 비교하였다. 이를 통해 환경과 자동차, 인간과 자동차의 관계성에 내재되어야 할 디자인의 정신성과 자동차의 지속 발전에 필요한 디자인 고려 사항들을 정리하였다. 본 논문은 자동차 디자인의 구체적인 스타일에 대한 방향을 제시하기보다는 자동차가 21세기에도 지속 가능한 제품으로서 인간 생활의 편익을 지속 증대시키기 위해서 환경과 인간성 회복에 대한 디자이너의 윤리와 사명이 자동차 디자인의 활동과 교육의 중심이 되어야한다는 것을 강조하기 위한 것이다.