• 융합신호처리학회논문지
• /
• 제15권2호
• /
• pp.48-54
• /
• 2014

원소 ${\in}F(p)$에 대하여 두 종류의 기저함수가 알려져 있다. 통상적인 다항식 기저(polynomial bases)는 $\{1,{\alpha},{\alpha}^2,{\cdots},{\alpha}^{n-1}\}$로 이루어지고 이와 다르게 정규 기저(normal bases)는 $\{{\alpha},{\alpha}^p,{\alpha}^{p^2},{\cdots},{\alpha}^{p^{n-1}}\}$의 형태를 갖는다. 본 논문에서는 소수 p의 원소로 이루어지는 유한장 GF(p)상에서 n차원 벡터공간인 확대장 $GF(p^n)$을 이룰 수 있는 정규기저의 발생과 생성에 대하여 검토하고 정규기저를 기반으로 부호계열 발생알고리즘을 분석하여 발생기구성함수를 도출하였다. 차수 n=5와 n=7인 두 종류의 정규기저를 생성할 수 있는 정규다항식을 발견하고 부호계열 발생기를 설계 구성하였다. 마지막으로 Simulink를 이용하여 두 종류(n=5, n=7)의 부호계열 그룹을 발생시키고 발생된 부호계열간의 자기상관함수, $R_{i,i}(\tau)$와 상호상관함수, $R_{i,j}(\tau)$, $i{\neq}j$ 특성을 분석하였다. 이 결과로부터 정규기저를 이용한 부호계열 발생알고리즘의 분석, 그리고 부호계열 발생기 설계와 구성이 타당함을 확인하였다.

• 한국CDE학회논문집
• /
• 제17권2호
• /
• pp.97-110
• /
• 2012

High performance sensors and modern data logging technology with real-time telemetry facilitate system fault diagnosis in a very precise manner. Fault detection, isolation and identification in fault diagnosis systems are typical steps to analyze the root cause of failures. This systematic failure analysis provides not only useful clues to rectify the abnormal behaviors of a system, but also key information to redesign the current system for retrofit. The main barriers to effective failure analysis are: (i) the gathered data (event) logs are too large in general, and further (ii) they usually contain noise and redundant data that make precise analysis difficult. This paper therefore applies suitable pre-processing techniques to data reduction and feature extraction, and then converts the reduced data log into a new format of event sequence information. Finally the event sequence information is decoded to investigate the correlation between specific event patterns and various system faults. The efficiency of the developed pre-filtering procedure is examined with a terminal box data log of a marine diesel engine.

• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.7-13
• /
• 2010

Linear motors are efficient mechanism that offers high speed and positioning accuracy. By eliminating mechanical transmission mechanisms, much higher speeds and greater acceleration can be achieved without backlash or excessive friction. However, an important disadvantage of linear motor system is its high power loss and heating up of motor and neighboring machine components on operation. Therefore, it is necessary to design moving table with high stiffness, high efficiency and light weight construction. This paper presents the development of moving table using composite material. In order to develop light weight construction of moving table, finite element analysis is performed to find best moving table construction and composite stacking sequence. NASTRAN and MINITAB were used as the optimizer. A prototype for the moving table using composite material was created.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.32-39
• /
• 2012

With the aid of genetic algorithm (GA), global optimization with multiple geometry parameters is feasible in the design of switched flux permanent magnet (SFPM) machines. To investigate the advantages of global optimization over individual optimization, which has been used extensively for the design of SFPM machines, a comparison between the two approaches is carried out for the case of fixed copper loss and volume. In the case of individual parameter optimization, the sequence in which the individual parameters are optimized is very important. In the global optimization a better design can always be achieved although the corresponding torque density is found to be only slightly better than that of individually optimized with correct design sequence. By using the obtained global optimization results, the performance in machines having two types of stator and rotor pole combinations, i.e. 12/10 and 12/14, are compared, and it is shown that higher torque is exhibited in the 12/14 SFPM machine. Finally, this paper also demonstrates that global optimization, with the restriction of equal pole width, magnet thickness and slot opening, can maximize the torque density without significantly sacrificing other performance, such as cogging torque and overload capability.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.56-61
• /
• 2019

In this country, mackerel landing, sorting, and packing are mostly performed manually, which is time consuming and labor intensive. An unloading automation system saves time and labor by automating the landing, sorting, and packing processes. Casers are devices for manufacturing packing boxes for fish used by unloading automation systems. The caser design in this study is for mackerel packing boxes. This caser makes a packing box based on a press using the caser's slide crank. When the caser makes a packing box, the manufacturing sequence is determined by the caser's production guide and assisting rod. The caser design in this study is simulated using a multi-body dynamics program. The simulation is used to analyze the caser and to visualize the box-making sequence.

• 감성과학
• /
• 제7권1호
• /
• pp.83-95
• /
• 2004

시장의 글로벌화는 시장환경을 급격히 변화시키고 있다. 따라서 본 연구는 이에 부응하여 디자인을 통해 글로벌경쟁우위를 차지하려 노력하는 글로벌 기업들을 위해 글로벌 디자인 프로세스를 제안하고자 한다. 본 연구는 글로벌 소비자문화의 의미구조와 이동의 관점에서 글로벌 세분시장을 구성하는 글로벌 소비자문화, 글로벌 디자인 및 글로벌 세분시장을 구성하는 소비자간의 순환적 인과구조를 규명하여 글로벌 디자인을 위한 새로운 연구의 틀을 창조한다. 그리고 이를 바탕으로 소비자들이 선호하는 디자인을 위해서 글로벌 소비자문화-기반 글로벌 디자인 프로세스를 제안하는 데 목적이 있다. 연구목적을 위해 먼저 글로벌 세분시장과 글로벌 소비자, 글로벌 소비자문화 및 글로벌 디자인을 고찰한다. 그 다음 이들 간의 인과구조를 규명하기 위해 이론적 고찰로서 McCraken의 제품의 문화적 의미구조와 이동에 관한 이론을 적용하여 그것을 바탕으로 연구의 틀을 구성한다. 그리고 글로벌 소비자문화 중 10대 청소년의 글로벌 문화에 대한 2차 자료를 바탕으로 사례연구를 진행한다 마지막으로 연구의 결과로서 글로벌 소비자문화-기반 글로벌 디자인 전략을 제안하고 미래 연구를 위한 방향을 논의한다.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.102-107
• /
• 2000

This study describes computer-aided design system for stepped asymmetric forgings. To establish the appropriate process sequence, an integrated approach based on a rule-base system was accomplished. This system has four modules, which are undercut prevention module, shape cognition module, 3D modelling module and corner/fillet correction module. These modules can be used independently or at all. The proposed shape cognition method could be widely used in forging design of asymmetric parts.

• 한국실내디자인학회논문집
• /
• 제21권1호
• /
• pp.240-247
• /
• 2012

Healing Environment is to cure the user as a whole by considering his social, psychological aspect, beyond the functional aspect of treatment. Various design elements of healing space have been developed so far, but they were mostly described with same rank. Even though every element is significant, facilities such as nursing homes tends to run with low budget, and they can't fulfill them all at the same time. It is important to find the sequence between design elements. The purpose of this study is to reorganize the design principles of healing environment by Maslow's hierarchy of needs(Physiological needs, Safety needs, Love/Affilitation needs, Self-Esteem needs and Self-Actualization needs), and analyze elderly nursing homes and examine the framework itself by application. Research method was consist of literature review on healing space design elements and hierarchy of needs, reconstruction of design elements with hierarchy, and application on 5 Korean nursing home cases. As the result, Maslow's hierarchy of needs and design elements were linked with good balance. Analysis of 5 nursing homes revealed that lower needs were short of environmental support compared to higher needs. Especially design elements related to Physiological needs should be improved. Also, new framework had strength in not only providing gasps on current situation in detail, but also suggesting elements for improvement with hierarchy and sequence. Through this research healing environment design elements and human needs were linked. Nursing home is the last environment for the elderly, which should help to heal their body and mind and also support them to accomplish self-actualization.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.985-990
• /
• 2001

The widened Seoul-Bridge is the first continuous 8-span prestressed concrete(PSC) girder bridge in domain. The construction sequence of the bridge consists of S steps in a large way. The measuring in construction stage includes the determination of the allowable fluctuation value of beam stress in each step and the measurement beam stress during prestessing. The measured tendon prestress force was compared with the design value. When it was compared with the analytic result, the difference between the measured stress and the analytic stress was below allowable error. The friction loss and the anchorage slip loss of the tendon prestress force was lower than the design loss value.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권8호
• /
• pp.486-494
• /
• 2005

This paper presents a design experience of a supervisory control system. For effective programming of job commands, a petri net-type graphical language (PGL) is proposed applied to various tasks having concurrency and synchronization. Our PGL based supervisory control system is composed of PGL editor and PGL compiler; PGL editor is designed to help us to generate a job program using graphical symbols. PGL compiler includes analyzer, scheduler, and tranlator, PGL analyzer prevents a deadlock or resource allocation of unit cell, PGL scheduler generates a adequate job sequence of unit cell. and PGL translator translate the scheduled sequence into the iob program of each unit cell.