• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Journal of Korean Public Health Nursing
• /
• v.18 no.1
• /
• pp.61-73
• /
• 2004

This study is intended to suggest fundamental data necessary for developing MBTI program that can help improve interpersonal relation skills of nursing science major students and their cohesion. This study is pre-experimental research by one group pretest-post test design to examine the effect of MBTI(Myers and Briggs Type Indicator) basic program on the interpersonal relationship between nursing science major students and their group cohesion and the relationship between interpersonal relationship and their group cohesion. I selected 39 of sophomore students in the department nursing science of K university in I metropolitan city as test group. 35 of them joined post-test. Pretest and MBTI basic program were done before conducting MBTI program. Collected data were analyzed by SPSS window 7.5. The difference in test group before and after conducting program was examined by paired t-test. The correlation between interpersonal relationship and group cohesion was measured by using Pearson Correlation Coefficient. The findings are as follows. $\cdot$ The difference before and after conducting MBTI program by sub-factors of interpersonal relation: There was no significant difference, as the average figure of interpersonal relation in test group was 87.22 before conducting MBTI and 85.08 after conducting MBTI respectively. The average figure of sensitivity among the sub-factors of interpersonal relation was 7.71 before conducting MBTI and reduced to 7.08 after conducting MBTI and there was significant difference between before and after conducting MBTI(t=-2.484, p=.018) $\cdot$ The difference in group cohesion before and after conducting MBTI program: The average figure of group cohesion in test group was 56.68 before conducting MBTI and increased a bit to 56.80 after conducting MBTI\, but there was no significant difference between them. $\cdot$ The relationship between interpersonal relationship and group cohesion before and after conducting MBTI: As the relationship between interpersonal relationship and group cohesion before and after conducting MBTI is examined, there was positive correlation of the significance level. p<.05 before conducting MBTI(r=.320, p=.047), and of the significance level, p<.01 after conducting MBTI(r=.780, p=.000). The investigation on the relation between sub-factors of group cohesion and of interpersonal relation before conducting MBTI basic program revealed that there was positive correlation between openness, reliability, friendliness and satisfaction, and group intervention, between receptivity among group members and reliability, and between group atmosphere and satisfaction. The investigation on the relation between sub-factors of group cohesion and of interpersonal relation after conducting MBTI basic program revealed that there was positive correlation between openness, communication, understanding, friendliness and satisfaction. and group intervention. There was positive correlation between receptivity among group members and openness, communication, understanding, friendliness and satisfaction. There was positive correlation between openness, communication, friendliness and satisfaction, and group atmosphere. Based on the above findings, I realize that MBTI basic program is essential to the improvement of group cohesion. In addition, it is shown that the sub-factors of interpersonal relation such as openness, communication, friendliness, satisfaction, and understanding, and the sub-factors such as group intervention and receptivity among group members are major factors to improve interpersonal relationship and group cohesion. So, the future MBTI program should include sub-programs that deal with the above factors to improve interpersonal relationship and group cohesion.

• Child Health Nursing Research
• /
• v.7 no.1
• /
• pp.21-34
• /
• 2001

The impact of childhood experience has lifelong significance on subsequent health and development. Especially, the experience of infant is mostly affected by the quality of parental care and rearing environment. But the new mothers usually do not know what to do because of the lack of experience in these days. Therefore, an educational program regarding maternal role would be necessary. This study was conducted to evaluate the effectiveness of the maternal role education program for mother-infant interaction, child-rearing environment, and infant development. Non-equivalent control group time-series design was used, and Barnard's mother-infant interaction model was used as a conceptual framework of this study. The subjects were the healthy infants weighing over 2,500gm at birth, whose gestational age was more than 37 weeks, and their mothers. The final sample consisted of 19 mother-infant dyads for intervention group and 18 dyads for control group. Data were collected from March 15th to September 3rd in 1999. For the intervention group, programmed education which focused on mother-infant interaction, breast feeding, and infant care was provided before discharge. Telephone counselling was provided within one week after discharge. Home visiting for maternal role education was provided twice, one month and three months postpartum. For the control group, home visiting was also conducted but only for data collection. The data were analyzed using chi-square test and t-test to test the equivalence of two groups, and the effectiveness of intervention program was determined with repeated measure ANCOVA and t-test. The results were as follows: 1. Significant differences were found in mother-infant interaction between two groups(p=.000). It indicates that intervention program was effective in improving mother- infant interaction. In subscale analysis, four out of six subscale showed significant differences between the groups: sensitivity to cues (p=.000), social-emotional growth fostering (p=.000), cognitive growth fostering(p=.000) in mothers, and responsiveness to caregiver (p=.019) in infants. 2. The difference in the mean score of childrearing environment (HOME) between the intervention group and control group was significant(p=.003). When each subscale of HOME was examined individually, intervention group showed significantly higher scores in the diversity of stimulation(p=.000), and mother's involvement(p=.001). 3. Three-month-Infants of the intervention group showed higher GQ in the Griffiths mental development scale(p=.026). In subscale analysis, significant differences were found in the personal-social(p=.005), and the hearing and speech(p=.003). In conclusion, the maternal role education program proved to be effective in promoting the mother-infant interaction, organizing the childrearing environment, and fostering the infant development. These results are very meaningful that we found maternal role education necessary for normal infants' mothers, and that nurses can make a great contribution in promoting health of infants and mothers.

• Child Health Nursing Research
• /
• v.7 no.1
• /
• pp.96-107
• /
• 2001

Recent research indicates that the new mothers want to learn about childrearing, and have burden in care of infants. Also it indicates that the new mothers say the lack of confidence and knowledge about infant care. This study was a prospective longitudinal reseach developing parent role education program and evaluating the effectiveness of this program for mother-infant interaction, childrearing environment and infant development. Longitudinal quasi-experimental design was used. The subjects were the healthy infants weighing over 2,500gm at birth, whose gestational age was more than 37weeks, and their mothers. The sample consisted of 19 mother-infant dyads for intervention group and 18 dyads for control group. Data were collected from March 15th to December 14th in 1999. For the intervention group received programmed education that was consisted of discharge education, telephone counselling, and home visiting for maternal education. The data were analyzed using chi-square test and t-test to test the equivalence of two groups, and the effectiveness of intervention program. This study was focused on the results of six months time point. The results were as follows: 1. There was significant difference in the mean score of mother-infant interaction(NCAST) between two groups. Intervention group showed higher scores in the subscales of sensitivity to cues, cognitive growth fostering, and caregiver total. 2. There was no significant difference in the mean score of child rearing environment (HOME) between two groups of six-month-infants. But when each subscale of HOME was examined, intervention group showed higher scores in the dimensions of opportunities for variety in daily stimulation, maternal involvement with child, and emotional, verbal response. 3. Six-month-infants of the intervention group showed significantly higher GQ in the Griffiths mental development scale. In conclusion, the maternal education program was effective in promoting the mother-infant interaction, organizing the childrearing environment, and fostering the infant development. These results were very meaningful that we found parent role education necessary for normal infants' mothers, and nurses can make a great contribution in promoting health of infants and mothers.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.139-156
• /
• 1995

A set of field investigations was performed to estimate accurately the predominant periods of seismic 8round motions and the attenuation characteristics of the seismic ground vibration. Predominant periods of ground motions were estimated from the measurement of the continuous microseismic vibratins of certain periods, inherent in the ground and in the buildings, utilizing the high sensitivity digital velocity seismometer consisting of 3-component geophones and a digital seismograph. Estimated predominant periods of microseismic vibraion of the ground(measured on'the ground surface) and the building (measured on the second floor) were in the range of 0.18~0.235 sec. and 0.26~0.31 sec. respectively. The subsurface structure of the site ground was surveyed by the seismic refraction method utilizing the digital seismicwave probing system. The ground structure was found to be a two-layered system : an upper top soil layer of 7m in thickness with the P-wave velocity of 662m1sec and a lower layer of silty-clayey soils with the P -wave velocity of 2210m1 sec. The attenuation characteristics of the seismic ground vibrations were determined by the amplitude decay measurement method us;ng the Seisgun, which produces strong artificial seismic energy. Measured spatial attenuation coefficients of the ground vibration in vertical(Z) longitudinal(X), transverse(Y) direction were 0.1137, 0.0025, and 0.0290 respectively. Estimated Spartial QP's (inverse of the specific dissipation constant w.r.t. shear waved of X, Y, and Z directions were in the range of 5.913~7.575, 32.371~41.452, 2.794~3.579 re spectively. This indicates that aseimic design of the structures on the site should take stronger consideration regarding the earthquake resistance characteristics of the structures against longitudinal ground motion.

• The KIPS Transactions:PartB
• /
• v.15B no.6
• /
• pp.507-516
• /
• 2008

Cardiac disease is the leading cause of death in the world. Quantification of cardiac function is performed by manually calculating blood volume and ejection fraction in routine clinical practice, but it requires high computational costs. In this study, an automatic left ventricle (LV) segmentation algorithm using short-axis cine cardiac MRI is presented. We compensate coil sensitivity of magnitude images depending on coil location, classify edge information after extracting edges, and segment LV by applying region-growing segmentation. We design a weighting function for intensity signal and calculate a blood volume of LV considering partial voxel effects. Using cardiac cine SSFP of 38 subjects with Cornell University IRB approval, we compared our algorithm to manual contour tracing and MASS software. Without partial volume effects, we achieved segmentation accuracy of $3.3mL{\pm}5.8$ (standard deviation) and $3.2mL{\pm}4.3$ in diastolic and systolic phases, respectively. With partial volume effects, the accuracy was $19.1mL{\pm}8.8$ and $10.3mL{\pm}6.1$ in diastolic and systolic phases, respectively. Also in ejection fraction, the accuracy was $-1.3%{\pm}2.6$ and $-2.1%{\pm}2.4$ without and with partial volume effects, respectively. Results support that the proposed algorithm is exact and useful for clinical practice.

• Clean Technology
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2014

Because of the water scarcity caused by the increase of salinity in the underground water, seawater desalination stands out as one of the most promising solution. As there are so much energy costs in operating desalination plants, new hybrid process which is more effective should be researched. A geothermal VMD (vacuum membrane distillation) hybrid process is a competitive alternative for seawater desalination. Because geothermal energy has significant characteristics of high capacity factor to operate the power plant at full capacity for 24 hour per day, it can be a priority heat source of VMD superior to any other renewable energies such as solar and wind power. In this study, we design a geothermal VMD hybrid process, analyze it economically and finally compare the result with a case of conventional VMD process. Geothermal VMD hybrid process generates $23,822,409 of NPV (net present value) more than the conventional VMD process in case of 5% discount rate. The break-even point between these processes is 5.36 year. Sensitivity analysis indicates that steam cost is the most decisive influence variable to the economic outcome.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.4
• /
• pp.19-26
• /
• 2012

For a seismic design or performance evaluation of a structure, an experimental investigation on a scale model of the structure or numerical analysis based on the finite element model is considered. Regarding the numerical analysis, a three-dimensional finite element analysis is performed if a high accuracy of the results is required, while a sensitivity or fragility analysis which uses huge seismic ground motions leads to the use of a lumped-mass stick model. The conventional modeling technique to build the lumped-mass stick model calculates the amount of the lumped mass by considering the geometric shape of the structure, like a tributary area. However, the eigenvalues of the conventional model obtained through such a calculation are normally not the same as those of the actual structure. In order to overcome such a deficiency, in this study, a new lumped mass stick model is proposed. The model is named the "frequency adaptive-lumped-mass stick model." It provides the same eigenvalues and similar dynamic responses as the actual structure. A non-prismatic column is considered as an example, and its natural frequencies as well as the dynamic performance of the new lumped model are compared to those of the full-finite element model. To investigate the damping effect on the new model, 1% to 5% of the critical damping ratio is applied to the model and the corresponding results are also compared to those of the finite element model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.152-164
• /
• 2015

A rapid development of semiconductors, sensors and mobile network technologies has enable that the embedded device includes high sensitivity sensors, wireless communication modules and a video processing module for vehicular environment, and many researchers have been actively studying the smart car technology combined on the high performance embedded devices. The vehicle is increased as the development of society, and the risk of accidents is increasing gradually. Thus, the advanced driver assistance system providing the vehicular status and the surrounding environment of the vehicle to the driver using various sensor data is actively studied. In this paper, we design and implement the smart vehicular camera device providing the V2X communication and gathering environment information. And we studied the method to create the metadata from a received video data and sensor data using video analysis algorithm. In addition, we invent S-ROI, D-ROI methods that set a region of interest in a video frame to improve calculation performance. We performed the performance evaluation for two ROI methods. As the result, we confirmed the video processing speed that S-ROI is 3.0 times and D-ROI is 4.8 times better than a full frame analysis.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.299-305
• /
• 2015

Modbus is a serial communications protocol, it has since become a practically standard communication protocol, and it is now a commonly available means of connecting industrial electronic devices. Therefore, it can be connected with all devices using Modbus protocol to the measurement and remote control on the ships, buildings, trains, airplanes and etc.. In this paper, we add the Modbus communication protocol to the existing lighting controller sensitivity to enable verification and remote control by external environmental factors, and also introduces a fuzzy inference system was configured by external environmental factors to control LED lighting. External environmental factors of temperature, humidity, illuminance value represented by the LED through a fuzzy control algorithm, the values accepted by the controller through the sensor. Modbus is using the RS485 Serial communication with other devices connected to the temperature, humidity, illumination and LED output status check is possible. In addition, the remote user is changed to enable it is possible to change the RGB values in the desired color change. Produced was confirmed that the LED controller output is based on the temperature, humidity and illumination.