• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.650-657
• /
• 2001

This paper explains the process of designing a shielded encircling remote field eddy current (RFEC) probe to inspect nuclear fuel cladding tubes and investigates resulting signal characteristics. To force electromagnetic energy from exciter coil to penetrate into the tube, exciter coil is shielded outside by laminations of iron insulated electrically from each other. Effects of shielding and the proper operating frequency are studied by the finite element analysis and the location for sensor coil is decided. However, numerically simulated signals using the designed probe do not clearly show the defect indication when the sensor passes a defect and the other indication appeared as the exciter passes the defect is affected by the shape of shielding structure, which demonstrates that the sensor is directly affected by exciter fields. For this reason, the sensor is also shielded outside and this shielding dramatically improves signal characteristics. Numerical modeling with the finally designed probe shows very similar signal characteristics to those of inner diameter RFEC probe. That is, phase signals show almost equal sensitivity to inner diameter and outer diameter defects and the linear relationship between phase signal strength and defect depth is observed.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.5
• /
• pp.981-999
• /
• 2017

In the standard control chart assuming a simple random model, we estimate the process variance without considering the between-sample variance. If the between-sample exists in the process, the process variance is under-estimated. When the process variance is under-estimated, the narrower control limits result in the excessive false alarm rate although the sensitivity of the control chart is improved. In this paper, using the variance component model to incorporate the between-sample variance, we set the control limits using both the within- and between-sample variances, and evaluate the efficiency of the control chart in terms of the average run length (ARL). Considering the most widely used control chart types such as ${\bar{X}}$, EWMA and CUSUM control charts, we compared the differences between two cases, Case I and Case II, where the between-sample variance is ignored and considered, respectively. We also considered the two cases when the process parameters are given and estimated. The results showed that the false alarm rate of Case I increased sharply as the between-sample variance increases, while that of Case II remains the same regardless of the size of the between-sample variance, as expected.

• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.50-57
• /
• 2018

Salmonella continue to be a major cause of food poisoning worldwide. The rapid detection method of food-borne Salmonella is an important food safety tool. A real-time polymerase chain reaction (PCR) has been used as a rapid method for the detection of pathogens. It has been recently reported that NBS LabChip real-time PCR is a novel, ultrafast, and chip-type-convenient real-time PCR system. We developed the assay method based on NBS LabChip real-time PCR for the rapid detection of Salmonella, which its reaction time was within 20 minutes. Two target genes (invA and stn) were selected to design target specific primers and probes. The new method was validated by checking specificity and sensitivity (limit of detection). This study included forty-two target and twenty-one non-target strains to assess the specificity. This assay was able to identify the 42 Salmonella strains correctly. The limit of detection (LOD) was $10^1copies/{\mu}L$ in Salmonella genomes DNA, while LOD incubated for 4 hr in the inoculated sausage sample ranged from $10^1CFU/g$ to $10^2CFU/g$ as an inoculated cell count. The assay developed in this study could be applied for the investigation of food poisoning pathogens.

• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.637-643
• /
• 2018

A depth of interaction(DOI) detector module using a block scintillator and a pixellated scintillator was designed, and layer discrimination ability was calculated using DETECT2000. The block scintillator was used to improve the sensitivity and the spatial resolution was improved by measuring the DOI. The DOI was measured by analyzing the signal characteristics of each channel of the changed distribution of light. The detector module was composed to the block scintillator in the top layer and the pixellated scintillator in the bottom layer, which changes the distribution of light generated from a scintillator interacting with a gamma ray. In the flood image, the top layer was able to acquire the image at the position similar to the position of the bottom layer because the bottom layer consist of the pixellated scintillator. By using the Anger algorithm, the 16 channel signal was reduced to 4 channels to facilitate the analysis of the signal characteristics. The layer discrimination was measured using a simple algorithm and the accuracy was about 84% for each layer. When this detector module is used in preclinical PET, the spatial resolution at the outside of the field of view can be improved by measuring the DOI.

• Journal of Science of Art and Design
• /
• v.10
• /
• pp.111-159
• /
• 2006

The study is to examine the concept, origin, developmental process, and characteristics of 'Kioonsangdong,' or 'lively energy' to look into whether 'Kioon' maybe interpreted by modern sense and sensitivity and be applied to contemporary creative activities, and to explore whether the ideality of 'Kioon' may be transferred into visualization in pictures. The article defines the scope of 'Ki' as 'Ki(energy)' of artistry and sees the Wei, Chin and the South & North dynasties as its derived point. In Chapter I, before the examination of 'Kioon,' 'the relationship of Ki and Oon,' and 'interrelationship of Kioon (energy) and Sangdong (liveliness) are investigated. It is impossible to define Kioon in a word due to its being abstract. Thus, although it does not seem to be unlimited, focusing on putting a variety of concepts of Kioonsangdong in order, it classifies the subject, from which such Kioon reveals itself, into 'its former self,' things of the object,' 'character,' and 'brush and Chinese ink.' Then, with selected representative works for each category, it examines how Kioonsangdong is reflected in the works. In addition, it comprehensively argues on Kioon through presenting the points of Kioon theories by many an art critic and artist from the Wei, Chin and the South & North dynasties to modem China. In Chapter II, the study analyzes the Kioon-reflected works that have been examined in Chapter 1 in the light of the Kioon theories of 'blanks,' 'styles of brushmanship,' and 'techniques of Chinese ink,' and by selecting and analyzing representative artists and works in each era, it investigates how Kioon had been transformed as times had changed. In Chapter III, which is the core of the study, is on contemporary interpretations of Kioon. I intend to interpret Kioon as scent. In other words, through replacing abstract Kioon with the olfactory sense, actually realizing and forming it, and then visualizing it onto my own work, I attempt to grope for contemporary interpretations of Kioon. That is to say, I explain how Kioon is transformed into scent on the grounds that the origins of Kioon may be detected in literature and aesthetics. Besides, the study looks into the process that 'the scent of the olfactory sense' turns into 'the scent of art,' which I assert by contemporary interpretations, and shows in details that it may be visualized in pictures presenting quotes. In Chapter IV, it analyzes Kioonsangdong expressed visually as the scent of art in my own work in terms of the three techniques of blanks, brushmanship, and Chinese ink.

• The Journal of Engineering Geology
• /
• v.21 no.3
• /
• pp.239-246
• /
• 2011

Upon encountering weathering soil at a construction site, it may be necessary to change the design and construction plans for geotechnical structures. When weathering soil is exposed to air, the weathering process proceeds rapidly, resulting in significant damage to geotechnical structures, particle defects, and an increase in moisture sensitivity. The management of weathering-soil compaction is challenging. Because the engineering properties of weathering-soils vary regionally, it is important to report the result of research into the regional characteristics of such soils. At two locations of granite gneiss in the Gansung area of Gangwon-do, geological studies were performed at 22 and 8 sites, respectively. At each site, test samples were collected for analysis by XRD and to measure particle size, consistency, and compaction. To evaluate the suitability of the material for road subgrade, we examined the interrelationship between CBR value and the uniformity coefficient, the 200 sieve passing ratio and the aggregate ${\geq}$ 2 mm) content. We found that for the weathered granite soil, aggregate sized > 2 mm has a significant effect on the CBR value. In addition, the mixing of aggregate sized > 2 mm with sub-quality soil improves the soil condition.

• International Journal of Highway Engineering
• /
• v.5 no.4 s.18
• /
• pp.1-11
• /
• 2003

Recently, the new pavement design method considering Korean environment and the specification for improving performance of pavement are being developed in Korea. The Jointed Concrete Pavement Program Applying Load Discretization Algorithm (called HEART-JCP) is one of the results of Korea Pavement Research Project in Korea. HEART-JCP program is developed to analyze various loading condition using the load discretization algorithm without mesh refinement. In addition, it can be modified easily into multi-purpose concrete pavement nidyses program because of the modularized structure characteristic of HEART-JCP. The program consists of basic program part and load discretization part. In basic program part, the displacement and stress are computed in the concrete slab, sub-layer, and dowel bar, which are modeled with plate/shell element, spring element and beam element. In load discretization program part, load discretization algorithm that was used for the continuum solid element is modified to analyze the model with plate and shell element. The program can analyze the distributed load, concentrated load, thermal load and body load using load discretization algorithm. From the result of verification and sensitivity study, it was known that the loading position, the magnitude of load, and the thickness of slab were the major factors of concrete pavement behavior as expected. Since the result of the model developed is similar to the results of Westergaard solution and ILLISLAB, the program can be used to estimate the behavior of jointed concrete pavement reasonably.

• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.119-125
• /
• 1994

Transient power level of the fuel rod is one of the key parameters for the transient fuel behavior. Through the analysis of the fuel performance data bases and sensitivity analyses of such parameters as rod power history, fast neutron flux, fuel enrichment and cycle length, which can affect the transient fuel behavior, a methodology generally applicable to find the allowable transient power level during the ANS Conditions I and II below which the mechanical integrity of the fuel rod is maintained was derived, and allowable transient power levels for the 17$\times$17 KOFA fuel rod have been determined as a function of the burnup. With the introduction of this methodology, design analysis of the transient fuel behavior currently being calculated every cycle can be replaced by the simple check of the peak transient power level achievable during the cycle, and an operational flexibility of the reactor can be obtained by allowing higher transient power level up to 689.5 w/cm at low burnup range than current maximum allowable transient power level, 591 w/cm for the 17$\times$17 KOFA fuel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.477-483
• /
• 2018

A transparent antenna designed on the front glass of an automobile operating in the FM broadcast band(88~108 MHz) is proposed. A transparent antenna designed on the front glass of the automobile to avoid space limitation is typically positioned as a roof-mounted shark-fin antenna. An antenna designed on the front glass can reasonably solve the problems of low reception sensitivity and radiated interference from antennas for other service bands. The front glass has a unique closed-line structure, and this structure causes the surface current to flow to the front glass's surroundings; thus, the first resonance is caused before the broadcast band. Through the use of this closed-line structure, the surface current distribution is controlled, and an antenna for which the first resonance is operating in the frequency-modulated(FM) band can be designed. Moreover, the use of a micro-metal-mesh film that is a transparent electrode, suitable for designing a radio frequency device, enables the antenna to minimize visual perception through its transparency. The measured reflection coefficient($S_{11}$) of the antenna is less than -6 dB, and the average peak gain is -0.9 dB in the FM band. Experiments show that the transparent antenna on the front glass offers both the space and design freedom required to develop future automotive antennas.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.981-986
• /
• 2020

The Internet of Things refers to a space-of-things connection network configured to allow things with built-in sensors and communication functions to interact with people and other things, regardless of the restriction of place or time.IoT is a network developed for the purpose of services for human convenience, but the scope of its use is expanding across industries such as power transmission, energy management, and factory automation. However, the communication protocol of IoT, MQTT, is a lightweight message transmission protocol based on the push technology and has a security vulnerability, and this suggests that there are risks such as personal information infringement or industrial information leakage. To solve this problem, we designed a synchronous MQTT security channel that creates a secure channel by using the characteristic that different chaotic dynamical systems are synchronized with arbitrary values in the lightweight message transmission MQTT protocol. The communication channel we designed is a method of transmitting information to the noise channel by using characteristics such as random number similarity of chaotic signals, sensitivity to initial value, and reproducibility of signals. The encryption method synchronized with the proposed key value is a method optimized for the lightweight message transmission protocol, and if applied to the MQTT of IoT, it is believed to be effective in creating a secure channel.