• Journal of the Korea institute for structural maintenance and inspection
• /
• 제22권1호
• /
• pp.167-175
• /
• 2018

This research deals, The characteristics of mechanics and behavior of the tube structural systems, It has been investigated and considered conventional theory and case models, It has shown the suitability, The best location, And optimal shape of the unit module system, Considered variables materials of stiffness increase and decrease in hybrid tube structural systems this study carried out adapting analysis of statistical concepts. In a concrete way, This study exams the effect of reducing horizontal displacement and the shear lag phenomenon, Also, The purpose of this study is to utilize the basic data on the design and study of future high-rise hybrid structural system using this research. As a result, The framed- tube structural system does not effectively cope with horizontal behavior of high-rise buildings, The results of using varying material tested resistance factors and lateral loads in hybrid tube structural system, When each material is compared Bracing material is identified as a key factor in lateral behavior. In a ratio of material quantity framed-tube structural system, The level of sensitivity affecting the horizontal displacement is greater then the beam's column, In case of braced tube structural system, Braced appeared to be most sensitive in comparison of material quantity ratio in columns and beams.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제14권6호
• /
• pp.238-245
• /
• 2010

Progressive collapse is defined as a collapse caused by sectional destruction of a structural member which links to other surrounding structures. Currently the design guidelines for the prevention of progressive collapse is not available in Korea. So, structural engineers have a difficulty in evaluating progressive collapse. In this study, the static and dynamic analysis to evaluate the methods and procedures are conducted using commercial analysis program for RC moment resisting frames. According to the study, DCR value of RC moment resisting frame system based on code in Korea is over 2 and it shows that it can't provide alternate load paths due to the progressive collapse. And additional reinforcement should be considered for the progressive collapse resistance. As a result of vertical deflection and DCR value of linear static analysis and linear dynamic analysis, the results of dynamic analysis were underestimated more than the result of static analysis. Thus, the dynamic coefficient value of 2 provides conservative estimation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제21권1호
• /
• pp.9-14
• /
• 2017

In the present work, a mechanical performances under cyclic loading in RC (Reinforced Concrete) beams with normal steel and FRPH (Fiber Reinforced Plastic Hybrid) bar are investigated. For the work, RC beam members with $200{\times}200{\times}2175mm$ of geometry and 24 Mpa of design strength are prepared, and 4-point-bending tests are performed for evaluation of cracking, yielding, and ultimate loads. Through static loading test, 48.9kN and 36.0 kN of yielding loads are measured for normal RC and FRPH beam, respectively. They have almost same ultimate load of 50.0 kN. Typical tension hardening behavior is observed in FRPH beam, which is caused by the behavior of FRPH bar with tension hardening. In cyclic loading conditions, FRPH beam has more smaller crack width and scattered crack pattern, and it shows more elastic recovery than normal RC beam. The energy dissipation ratio in FRPH beam is 0.83, which is greater than 0.62 in normal RC beam and it shows more effective resistance to cyclic loadings.

• KSBB Journal
• /
• 제20권3호
• /
• pp.220-227
• /
• 2005

Doxorubicin is an anthracycline-family polyketide compound with a very potent anti-cancer activity, typically produced by Streptomyces peucetius. To understand the potential target biosynthetic genes critical for the doxorubicin everproduction, a doxorubicin-specific DNA microarray chip was fabricated and applied to reveal the growth-phase-dependent expression profiles of biosynthetic genes from two doxorubicin-overproducing strains along with the wild-type strain. Two doxorubicin-overproducing 5. peucetius strains were generated via over-expression of a dnrl (a doxorubicin-specific positive regulatory gene) and a doxA (a gene involved in the conversion from daunorubicin to doxorubicin) using a streptomycetes high expression vector containing a strong ermE promoter. Each doxorubicin-overproducing strain was quantitatively compared with the wild-type doxorubicin producer based on the growth-phase-dependent doxorubicin productivity as well as doxorubicin biosynthetic gene expression profiles. The doxorubicin-specific DNA microarray chip data revealed the early-and-steady expressions of the doxorubicin-specific regulatory gene (dnrl), the doxorubicin resistance genes (drrA, drrB, drrC), and the doxorubicin deoxysugar biosynthetic gene (dnmL) are critical for the doxorubicin overproduction in S. peucetius. These results provide that the relationship between the growth-phase-dependent doxorubicin productivity and the doxorubicin biosynthetic gene expression profiles should lead us a rational design of molecular genetic strain improvement strategy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제42권4호
• /
• pp.716-722
• /
• 2017

In this paper, a fully printed NFC tag operating at 13.56 MHz was designed and fabricated using silver nano-paste and carbon ink. The proposed NFC tag has a printed coil with an inductance of $2.74{\mu}H$ on a PI film for application to an NFC tag IC with an internal capacitance of 50 pF. Screen printing technology used in this paper has advantages such as large area printing for mass production, low cost and eco-friendly process compared to conventional PCB manufacturing process. The proposed structure consists of a circular coil implemented as a single layer using silver nano-paste and carbon ink, a jumper pattern for chip mounting between the outer edge and the center of the coil, and an insulation pattern between the coil and the jumper pattern. In order to verify the performance of the proposed NFC tag, we performed the measurements of the printing line width, thickness, line resistance, adhesion and environmental reliability, and confirmed the suitability of the NFC tag based on the full-printed manufacturing method.

• Elastomers and Composites
• /
• 제48권2호
• /
• pp.172-179
• /
• 2013

Impact modifier reinforced polymers are frequently used. In this study, Izod impact test has been simulated to analyze the mechanism of impact reinforcement of Nylon6 which contains impact modifier. The modeling of rubber particles added to Nylon6 as an impact modifier has been attempted. Based on the modeling, simulation of Izod impact test has been performed to observe the distribution and direction of stress at the cross-section of impact specimen. Three computer simulation models for Nylon6 were investigated. Those were without impact modifier, containing impact modifier without surface treatment, and containing impact modifier with surface treatment in the Nylon6. Simulation results showed that the stress which originated at the notch surface propergated to the inside of specimen round a impact modifier. In addition to that, impact modifier reinforced Nylon6 specimen showed low stress ditribution in the cross-section specially at notch surface. Principal stress in perpendicular direction to crack was also lowered in impact modifier reinforced Nylon6. These enhanced impact resistance reduced and crack propergations. Through this study it was realized that the computer simulation can be utilized to investigate the property enhacement of composite materials.

• Journal of Distribution Science
• /
• 제16권8호
• /
• pp.63-68
• /
• 2018

Purpose - Lettuce (Lactuca sativ L.) is one of the economically important vegetable crops, which worldwide market value is over 100 billion U.S. dollar. In Korea, about 89.7 kilo ton of lettuce was produced in 3400ha in 2016, recoded as No. 1 vegetable crop in domestic green house production. However, recently, domestic lettuce production and cultivation areas are all getting decreased. Thus, novel approaches are needed to be implemented to revive the production. Research design, data and methodology - In this review paper, we first prioritized the end-user traits which are imperative to positively stimulate the domestic lettuce market and discussed relevant genomics strategies. Especially, we assessed a possibility whether school meal program would be a potential niche market. Results - The genomics technologies, which become widely applied in the crop biotechnology since 2008 when next generation sequencing method was developed, may be a good solution in the crop improvement, efficiently gathering valuable information of agriculturally useful traits. Significantly, in lettuce, the high quality whole genome sequence, based on Lactuca sativa cv. Salinas, is publically available and this genomics platform, thus, would be implemented in lettuce breeding program to innovate relevant end-user traits both for the farmers and customers, including the disease resistance to the Fusarium wilt, productivity under hot weather conditions, various nutritional qualities and so forth. These improvements will boost domestic lettuce industries in the near future. Conclusions - Due to the nutritional distinctions comparing to the western style lettuces, domestic leaf lettuces could be one of the important vegetables in the school meal programs. To make it happen, we would better devise diverse recipes to make a salad with it, instead of only using as a wrap vegetable. Meanwhile, novel lettuce varieties need to be developed, which are favorable to the students and also easy to be handled with while processing. Overall, to achieve international competence in the lettuce industries, we need to create elite lettuce varieties that satisfies domestic farmers as well as customers, suitable to various niche markets, such as school meal program. Thus, efficient breeding programs using genomics approaches should be established in advance and careful monitoring on the preference of the related customers for a niche market be continued persistently.

• Journal of the Korea Concrete Institute
• /
• 제17권6호
• /
• pp.923-930
• /
• 2005

This paper was to evaluate the high strength lightweight self-compacting concrete(HLSCC) manufactured by Nan-Su, which main factor, Packing Factor(PF) for mixing design, has been modified and improved. We have examined HLSCC performance at its fresh condition as well as its mechanical properties at the hardened condition. The evaluation of HLSCC fluidity has been conducted per the standard of second class rating of JSCE, by three categories of flowability(slump-flow), segregation resistance ability(time required to reach 500mm of slump-flow and time required to flow through V-funnel) and filling ability(U-box test) of fresh concrete. The compressive strength of HLSSC at 28 days has come out to more than 30MPa in all mixes. The relationship between the compressive strength-splitting tensile strength and compressive strength-modulus of elasticity of HLSSC were similar those of typical lightweight concrete. Compressive strength and dry density of HLSCC at 28 days from the multiple regression analysis resulted as $f_c=-0.16LC-0.008LS+50.05(R=0.83)\;and\;f_d=-3.598LC-2.244LS+2,310(R=0.99)$, respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• 제4권4호
• /
• pp.349-355
• /
• 2016

This study is about the reuse of bottom ash, which is released as a necessity in thermal power plant. In general, coal-ash are classified as fly-ash, bottom-ash, cinder-ash. Of these, a large amount of fly ash is being recycled as cement substitutes. While, recycling rates of bottom ash are the lowest due to its porosity and high absorption. In this study, the durability of the concrete using bottom ash as a concrete fine aggregate was evaluated. The using level of the bottom ash ranges to step-by-step from 0% to 30%. According to the result of the durability test, regardless of the presence of the bottom ash, freeze-thaw durability could be secured by air entrainment. In case of the resistance to chloride ions penetration, the length change, and the effects on heavy metals, the replacement of bottom ash as fine aggregate was not critical. Although carbonation penetration was higher as the replacement level of bottom ash increased, the experiment showed that it could be possible to use bottom ash as concrete fine aggregate with proper mix design.

• Journal of Korean Academy of Nursing
• /
• 제26권3호
• /
• pp.556-575
• /
• 1996

In an attempt to investigate the effect of a muscle strengthening exercise program on muscle strength, pain, depression, self-efficacy and quality of life of patients with knee osteoarthritis, a pre-experiment, one group pre-test & post-test design, was planned. Muscle strengthening exercise was carried out from May 22 through August 14, 1995 at isokinetic exercise room in rehabilitation department of University Hospital in Taejon. The subjects were seven female clients conveniently sampled from University Hospital located in Taejon, between 39 and 61 years of age, who had a osteoarthritis in knee. Muscle strengthening exercise program was composed of three sessions per week, one isokinetic exercise at angular velocity of 60° and 180° with Cybex isokinetic dynamometer and two resistance home exercise sessions with elastic band. Data were analyzed with frequency, percentage of change, Friedman test, Duncan test using SAS program. Results were obtained as follows : 1) Flexion and extension muscle strength at angular velocity of 60° and 180° were increased after 12weeks' exercise than those of before experiment. But exept flexion muscle strength at angular velocity of 180°(F=3.34, P=0.0261), there was no statistically significant difference among muscle strengths, which is measured every 3 weeks. 2) Pain was decreased after 6weeks' exercise than that of before experiment, and after 12weeks' exercise than that of 6weeks' exercise. There was statistically significant difference (F=4.28, P=0.0396). 3) Depression was increased after 6weeks' exercise than that of before experiment, and after 12weeks' execise than that of 6weeks' exercise. There was no statistically significant difference between before experiment and after 6weeks' exercise. But, there was statistically significant difference between after 6weeks' exercise and 12weeks' exercise(F=9.38, P=0.0035). 4) Self-efficacy was decreased after 6weeks' exercise than that of before exercise. But, it was increased after 12weeks' exercise than that of be-fore exercise and after 6weeks' exercise. But there was no statistically significant difference (F=1.46, P=0.2706). 5) Quality of life was increased after 6weeks' exercise than that of before exercise, and after 6weeks' exercise than that of 12weeks' exercise. But there was no statistically significant differ once (F=1.06, P=0.3816). Thus, the significant of muscle strengthening exercise for the improvement of muscle strength, pain, depression, is verified. But, this study was a pre-experiment with small size subjects. So, con-trolled experimental study is necessary to determine the effect of this muscle strengthening exercise program on muscle strength, pain, depression, self-efficacy, and quality of life of patients with knee osteoarthritis.