• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제31권3D호
• /
• pp.433-439
• /
• 2011

The frost depth(frost penetration) is used to install anti-frost heave layers in pavement designs. The freezing index is calculated by an annual accumulated value of multiplying the period of time with temperatures below zero, and the corresponding temperature. Therefore, the DAAT(daily average air temperature) calculation method may play an effect on the FI(freezing index). The Weather Observatory used to supply 4 average air temperatures per day, but currently supplies 8 per day. With this study, we divided the southern part(below FI=$350^{\circ}C{\cdot}day$) of the Korean peninsula into 6 areas according to site conditions(low embankment, embankment-cutting slope, and the cutting slope) and established a field measurement system for 15 positions to check the effects on the result of FI according to differing DAAT calculation methods. The air temperatures obtained by the field measurement system was used to calculate and compare the FI. As a result, the freezing index calculated based on the $DAAT_4(T_4)$ is normally greater by 3% than the one on $DAAT_8(T_8)$. In addition, the calibration equation for the freezing index using air temperatures was proposed through the research.

• Journal of Convergence Society for SMB
• /
• 제3권2호
• /
• pp.51-56
• /
• 2013

Real-time processing of sensor data network, is one of the important factors. Each node in the detected data are required to be transmitted within a certain time since the accurate processing is possible. Thus, the data nodes are successfully delivered within a specified time, it is very important to check whether the. Recently more and more accurate real-time embedded systems are reliable and haejyeoseo been able to provide sophisticated services. Because of the inherent complexity of embedded systems in the physical world and the difficulty of predicting the difficulty of a safe design constraints on the runtime violation of system as to cause unexpected causes. Each node data in time detected by the time required to be passed in the appropriate processing is possible because the data transfer time in this paper, the monitoring of the sensor network through a node are allowed to exist within the time range and transmits data to the server Analysis of the data transfer time for checking whether the system was implemented. Implementation of the data transmission time to the process for analyzing and presenting, according to the procedure suggested by the transit time required for analysis a time difference analysis method, a data collection method and a data transmission time and transmission time calculating method presented.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권3호
• /
• pp.274-287
• /
• 2000

The use of dental implants has increased tremendously in recent years and is expected to increase even more in the future. The successful outcome of any implant procedure is surely dependent on interrelationship of the various components of an equation that includes biocompatibility of implant material, macroscopic and microscopic nature of the implant surface, the status of implant bed, surgical technique, undisturbed healing phase and subsequent prosthetic design and long-term loading phase. The purpose of this study was to clarify the effects of adrenalectomy on the osseointegration of pure titanium implants. Seventy rats, 11 weeks of age, were divided into two groups : an adrenalectomized group and a control group. Titanium screw implant(diameter, 2.0mm; length, 3.5mm) was placed into left tibia of 70 rats, 35 in control group and 35 in the experimental group. The rats were sacrificed at different time interval (1, 2, 3, 4, 6, 8, and 12 weeks after implantation) for histopathologic observation, histomorphometric analysis and immunohistochemistry with fibronectin and CD44 antibody. The results obtained from this study were as follows: 1. Histopathogically, findings, newly formed bone was seen at 3 weeks control group and became lamellar bone at 12 weeks. At 6 weeks, lipocytes were observed in bone marrow space. Thickness of regenerated trabecular bone increased till 6 weeks after then, that decreased gradually. 2. By histomorphometric analysis, marrow bone density and contact ratio of marrow bone to implant decreased significantly from 8 to 12 weeks in experimental group compared to control group and also total bone to implant contact ratio decreased significantly from 4 to 12 weeks in experimental group compared to control group. 3. Fibronectin immunoreactivity was very strong at 3 and 4 weeks control group. And after that reduced gradually. But it was continuously strong from 1 to 12 weeks experimental group. 4. CD44 immunoreactivity was very strong in the newly formed osteoblasts at 3 and 4 weeks control group. But it reacted minimally later. However, it reacted continuously strong from 3 to 12 weeks experimental group. From these results, bone to implant contact ratio decreased gradually from 4 weeks in adrenalectomized group compared to control group. CD44 and fibronectin immunoreactivities were strong at all times in adrenalectomized rats. Therefore, it could be stated that immature bone remained continuously for a long time and not readily proceeded into mature status.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제23권4호
• /
• pp.292-303
• /
• 2011

A new type of sand bypassing system is proposed for recovering the eroded beach in this study. This system provides an added methodology to the soft defence which is main recovery method for the coastal shore protection in the world. The study proposes a conceptional design and manufacturing procedure for the relatively small size machine of sand bypassing. In order to get the discharging volume information, the power capacity of the system is tested in the field. The discharge rate of the new system shows up to the expected maximum of 618 ton/hr which is 9.6% lower than that by theoretical calculation. It gives a resonable agreement in this system when the flow is assumed to be of the high density. In this study, the delivering volume of sand is estimated according to the discharge rate. The combination of 300 mm(12 inch) intake and 250 mm(10 inch) discharge pipe line has the pumping capacity of $103\;m^3/hr$ which is nearly the same as that of South Lake Worth Inlet sand bypassing system, Florida, U.S.A.. The proposed system added the mobility to its merit. The unit price of Florida's sand bypassing is $$8~9/m^3$ (US). The system would be economically suitable for small volume of sand because no additional equipment is necessary for the intake. The diesel fuel of 25~30 l/hr was consumed during the system operation. The multiple working system would be the next investigation target for large volume of sand.

• The Journal of Korean Academy of Prosthodontics
• /
• 제18권1호
• /
• pp.7-13
• /
• 1980

The purpose of this study was to evaluate the removable partial denture prescriptions including surveyed crowns and design of component parts sent to the laboratory technician. A total of 351 casess with prescription forms and master cast in maxillary and mandibular semi-edentulous situations collected from dental laboratory by random sampling were selected for this study. The evaluation and study observed here involved the classification of edentulous situations, status of abutment splinting, form of rest seats and guiding plane of surveyed crows, location of maxillary major connectors and tripodig marks on the master casts. Removable partial denture prescriptions contained (1) general request (upper and lower cast framework), (2) types of metal, (3) location of retainer(retention, lingual bracing, rest area, guiding plane surface), (4) location and type of major connector, (5) relief area and amount, (6) and other specific instructions. The following informations based on the classified groups such as Group I was those cases sent with no real prescriptions. They say 'make a partial.' No prescriptions, no thought beforehand, Group II was those cases sent with a minimal prescriptions. They say 'make a partial with clasps on May be some preparations, usually inadequate. Group III was those cases sent with a moderately good prescription. Adequate but could be much better. No tripoding but it tell what clasps go where. Still not good prescriptions. Group IV was good cases, tripoded with adequate prescriptions and a prescription which exactly describes what is expected from the laboratory. The analyzed results were as follows: 1. The normal form of rest seats and guiding plane of surveyed crowns in Class. I and Class. II edentulous situations on the maxillary cast were observed 31.9% and 27.89%, respectively. The abutment teeth and retainer without occlusal rests of Class. I and Class. II were showed 11.58% and 8.86%, respectively. In mandibular cases, the normal form of rest seats and guiding plane of surveyed crowns showed 27.54% and 8.82% in Class. I and Class. II situation. The abutment teeth and retainer without rest seats were showed 15.19%, respectively. 2. The splinted surveyed crowns of Class. I and Class. II maxillary edentulous situations in distal extension cases were showed 34.51% and 28.85%, but 28.52% and 10.29%, respectively. 3. The location and type of maxillary major connector delineated on the master cast were 66 cases (44.89%). 4. The results of 351 cases were classified as Group I 146(41.59%), Group II 115 (32.76%), Group III 57 (16.23%), and Group IV 33 (9.48%). 5. The delineation of abutment tooth for clasping were 176 cases (50.14%) among total of 351 cases. 6. The delineation of height of contour line were showed 45 cases (12.8%) in Group II, 14 cases (3.98%) in Group III and 33 cases (9.40%) in Group IV with total 92 cases (26.21%). 7. In surveying procedure, the delineation of tripoding marks and reference line were showed 17 cases (4.84%).

• The Journal of Korean Academy of Prosthodontics
• /
• 제18권1호
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

• The Journal of the Acoustical Society of Korea
• /
• 제39권4호
• /
• pp.351-363
• /
• 2020

Launch vehicles are subject to airborne acoustic loads during atmospheric flight and these effects become pronounced especially in transonic region. As the vibration due to the acoustic loads can cause malfunction of payloads, it is essential to predict and reduce the acoustic loads. In this study, a complete process has been developed for predicting airborne vibro-acoustic environment inside the payload pairing and subsequent noise reduction procedure employing acoustic blankets and Helmholtz resonators. Acoustic loads were predicted by Reynolds-Averaged Navier-Stokes (RANS) analysis and a semi-empirical model for pressure fluctuation inside turbulent boundary layer. Coupled vibro-acoustic analysis was performed using VA One SEA's Finite Element Statistical Energy Analysis (FE-SEA) hybrid module and ANSYS APDL. The process has been applied to a hammerhead launch vehicle to evaluate the effect of acoustic load reduction and accordingly to verify the effectiveness of the process. The presently developed process enables to obtain quick analysis result with reasonable accuracy and thus is expected to be useful in the initial design phase of a launch vehicle.

• Elastomers and Composites
• /
• 제42권1호
• /
• pp.20-31
• /
• 2007

Material characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, the NBR compound was prepared by sulfur-cure system, and was used in predicting the lifetime of rubber gasket made by the compound. The accelerated material aging was investigated at different temperatures at 120, 140 and $160^{\circ}C$ and aging time from 3 hours to 600 hours at 5, 6, 7 vol %. of $H_2SO_4$ concentrations The rubber strips were placed in acid solution using pyrex g1ass tube. Both ends of pyrex g1ass tube were sealed to avoid evaporation of solution during heating at given time. The material test and accelerated acid-heat aging test were carried out to predict the useful life of NBR rubber gasket for a fuel cell stack. In order to investigate the effects of acid-heat aging on the properties of the NBR, tensile strength, elongation at break, hardness and crosslink-density were measured. The tensile strength decreases as the $H_2SO_4$ concentrations and temperature increase. Results were evaluated using Arrhenius equation.

• Archives of Pharmacal Research
• /
• 제21권4호
• /
• pp.465-469
• /
• 1998

The search for platinum (II)-based compounds with improved therapeutic properties was prompted to design and synthesize a new family of water-soluble, third generation cis-diaminedichloroplatinum (II) complexes linked to uracil and uridine. Six heretofore unreported uracil and uridine-platinum (II) complexes are; [N-(uracil-5-yl-methyl)ethane-1,2-di-amine]dichloroplatinum (II) (3a), [N-(uracil-6-yl-methyl)ethane-1,2-diaminel dichloroplatinum (II) (3b), t[N-($2^1$, $3^1$,$5^1$-tri-O-acetyl)uridine-5-yl-methyl] ethane-1,2-diamineldichloroplatinum (II) (6a), {[N-($2^1$,$3^1$, $5^1$-tri-O-acetyl) uridine-6-yl-methyl]ethane-1,2-diamine)dichloroplatinum (II) (6b),[N-(uridine- 5-yl-methyl)ethane-1,2-diamine]dichloroplatinum (II) (7a), [N-(uridine-6-yl- methyl)ethane-1,2-diamine]dichloroplatinum (II) (7b). These analogues were prepared from the key starting materials, 5-chloromethyluracil (1a) and 6-chloromethyluracil (1b) which were reacted with ethylenediamine to afford the respective 5-[(2-aminoethyl)aminol methyluracil (2a) and 6-[(2-aminoethyl)amino]methyluracil (2b). The cis-platin complexes 3a and 3b were obtained through the reaction of the respective 2a and 2b with potassium tetrachloroplatinate (II). The heterocyclic nucleic acid bases 1a and 1b were efficiently introduced on the .betha.-D-ribose ring via a Vorbruggen-type nucleoside coupling procedure with hexamethyldisilazane, trimethylchlorosilane and stannic chloride under anhydrous acetonitrile to yield the stereospecific .betha.-anomeric 5-chloromethyl- $2^1$,$3^1$,$5^1$-tri-O-acetyluridine (4a) and 6-chloromethyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (4b), respectively. The nucleosides 4a and 4b were coupled with ethylenediamine to provide the respective 5-[(amino-ethyl)aminolmethyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (5a) and 6-[(aminoethyl)amino] methyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (5b). The diamino-uridines 5a and 5b were reacted with potassium tetrachloroplatinate (II) to give the novel nucleoside complexes, 6a and 6b, respectively which were deacetylated into the free nucleosides, 7a and 7b by the treatment with CH$_{3}$ONa. The cytotoxic activities were evaluated against three cell lines (FM-3A, P-388 and J-82) and none of the synthesized compounds showed any significant activity.

• International Journal of Knowledge Content Development & Technology
• /
• 제10권3호
• /
• pp.33-50
• /
• 2020

Knowledge recipes are packages of knowledge which arise from the process of combining the knowledge assets in the organization in distinctive ways. This involves converting them into useful outputs which are the ideal core competitive advantage enablers for companies. The major objective of this study was to propose a knowledge recipe for financial-sector state corporations in Kenya. The study adopted a convergent parallel mixed methods research design. Quantitative and qualitative data were collected using questionnaires and key informant interviews. The target population of the study was 1574 respondents drawn from all financial state corporations. A multistage sampling technique was used for the study. The first phase involved purposive sampling of the organizations to be studied whereby the four state corporations namely: Capital Markets Authority, Competition Authority of Kenya, Kenya Investment Authority, and Kenya Revenue Authority were identified. The second phase entailed stratified sampling of the respondents in three strata namely senior management team, knowledge management team, and general staff. The authors used a census of all senior management team and knowledge management staff while a simple random sampling technique was used for the general staff. By use of the Krejcie and Morgan table, the actual sample size was 358 respondents from all the four organizations. Data were collected using questionnaires and interview schedules. The qualitative data were analyzed using content analysis while the quantitative data were analyzed by the use of Ms. Excel and VOSviewer and presented using pie charts, bar graphs, and tables. The response rate for this study was 257 (72%). The study revealed that while most employees in the financial sector organizations understand their knowledge needs, knowledge types, knowledge uses and knowledge gaps, they do not have a universal knowledge recipe to facilitate effective knowledge management in their organizations. Consequently, the authors propose a universal knowledge recipe for the state corporations in the financial sector in Kenya. The ingredients of the recipe are legal-knowledge (18%), financial knowledge (15%), administrative knowledge (11%), best practice (10%), lessons learnt (8%), human resource knowledge (8%), research and statistics knowledge (7%), product knowledge (6%), policy and procedure knowledge (5%), ICT knowledge (4%), investor knowledge (3%), markets knowledge (2%), general knowledge (2%) and regulatory framework knowledge (1%).