• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.495-504
• /
• 2015

This work investigated the characteristics of a packed-bed plasma reactor system and the performances of the plasma reactors connected in series or in parallel for the decomposition of ethylene. Before the discharge ignition, the effective capacitance of the ${\gamma}$-alumina packed-bed plasma reactor was larger than that of the reactor without any packing, but after the ignition the effective capacitance was similar to each other, regardless of the packing. The energy of electrons created by plasma depends mainly on the electric field intensity, and was not significantly affected by the gas composition in the range of 0~20% (v/v) oxygen (nitrogen : 80~100% (v/v)). Among the various reactive species generated by plasma, ground-state atomic oxygen and ozone are understood to be primarily involved in oxidation reactions, and as the electric field intensity increases, the amount of ground-state atomic oxygen relatively decreases while that of nitrogen atom increases. Even though there are many parameters affecting the performance of the plasma reactor such as a voltage, discharge power, gas flow rate and residence time, all parameters can be integrated into a single parameter, namely, specific input energy (SIE). It was experimentally confirmed that the performances of the plasma reactors connected in series or in parallel could be treated as a function of SIE alone, which simplifies the scale-up design procedure. Besides, the ethylene decomposition results can be predicted by the calculation using the rate constant expressed as a function of SIE.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.1
• /
• pp.51-58
• /
• 2018

Purpose: In this study, through the comparison of the pressure fluctuation and air exchange volume in negative isolation room according to the type of the door and door opening/closing speeds, which is one of the main factors causing the cross contamination of the negative pressure isolation room, establishes standard operating procedures to prevent cross contamination in high risk infectious diseases and isolation room design. Methods: In this study, the air flow each of the room is analyzed using ANASYS CFX CODE for flow analysis. In addition, the grid configuration of the door is constructed by applying Immersed Solid Methods. Results: The pressure fluctuation due to the opening and closing of the hinged door was very large when the moment of the hinged door opened and closed. Especially, at the moment when the door is closed, a pressure reversal phenomenon occurs in which the pressure in the isolation room is larger than the pressure in the anteroom. On the other hand, the pressure fluctuation due to the opening and closing of the sliding door appeared only when the door was closed, but the pressure reversal phenomenon not occurred at the moment when the sliding door was closed, unlike the hinged door. As the opening and closing speed of the hinged door increases, the air exchange volume is increased. However, as the opening and closing speed of the sliding door is decreased, the air exchange volume is increased. Implications: According to the results of this study, it can be concluded that the pressure fluctuation due to the opening and closing of the hinged door is greater than the pressure fluctuation due to the opening and closing of the sliding door. In addition, it can be confirmed that the pressure reversal phenomenon, which may cause to reduce the containment effect in negative pressure isolation room, is caused by the closing of the hinged door. Therefore, it is recommended to install a sliding door to maintain a stable differential pressure in the negative isolation room. Also, as the opening and closing speed of the hinged door is slower and the opening and closing speed of the sliding door is faster, the possibility of cross contamination of the room can be reduced. It is therefore necessary to establish standard operating procedures for negative isolation room for door opening and closing speeds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.66-73
• /
• 2015

Alveolar bone loss and deformation can be a risk factor in removable prosthetic restoration treatment for partially or fully edentulous patients. The use of implants to solve this problem could improve the support, retention and stability of removable restoration. Attachments used in implant overdenture are versatile. The attachment should be selected according to the patients' conditions. Milled bar has been chosen when readymade bar could not be used because of the narrow distance between implants or firm stability and support of supra-structure were needed. Milled bar design is able to provide cross arch stabilization and comfortability to patients. However, it needs skilled laboratory procedures. Recently, the fabrication of milled bar has become simple and its suitability has been improved through the development of CAD/CAM system. In a 67-year-old female Alzheimer's disease patient with 8 implant fixtures on the fully edentulous site of mandible, implant overdenture with using milled bar and magnet attachment was planned. As rapid treatment was required, CAD/CAM system was used to make a simple laboratory procedure instead of a traditional fabrication process. With this system, implant overdenture with milled bar can be fabricated esthetically and functionally.

• Journal of Distribution Science
• /
• v.14 no.2
• /
• pp.47-56
• /
• 2016

Purpose - The purpose of this study is to investigate the difference in the degree of significance and satisfaction perceived by college students and ordinary consumers on the HMR product attributes. Comparison of the difference on HMR product attributes between ordinary consumers and college students who belong to the current and future consumption groups of HMR will provide information for clear marketing strategies and PR on target consumers from the aspects of companies. Also, overall difference on HMR was investigated through IPA(importance-performance analysis) on significance and satisfaction with each product attribute. This result will provide information to food companies that produce or supply HMR products to be supplemented and improved. Finally, IPA was conducted between groups on product attribute to find which difference exists between groups. This result is also expected to provide crucial information to companies as suggested in the first purpose. Research design, data, and methodology - The procedure of analysis is as follows. First, independent sample t-test was conducted on the significance and satisfaction on HMR product attributes. Second, with using IPA, the significance and satisfaction on HMR product attributes of the respondents were checked to investigate marketing strategy direction on overall HRM products. Third, the difference between generations was verified using IPA on the college student and consumer groups. According to this result, the direction of marketing strategy on HRM products was to be proposed to food companies. Results - It was known that consumers consider HMR product attributes statistically and significantly such as nutrient content(nutrition), country of origin, brand, main raw material, packaging, and awareness of manufacturer. They keep after purchase more importantly than college students who considered only volume and price than consumers. In comparison with the difference in satisfaction on HMR product attributes, the college student group was more satisfied than ordinary consumers only in flavor, condition of food additives, and volume. Also, HMR related food companies must maintain taste, cooking method, manufacturing date, expiration date, and safety on current products continuously. Finally, as a result of analysis from the groups, the attributes such as cooking method, manufacturing date, expiration date, and safety were considered significantly with high achievement by the two groups. It was known that college students considered food texture to be important, but consumers considered storage method to be important after purchasing it. Conclusions - There is necessity to differentiate effectiveness of products when releasing HMR products subject to consumers and college students. The result will give great assistance to the improvement of companies, produce or supply HMR products. It will also provide entry strategies on target groups of companies that are planning for entry. The factors that consumers commonly considered not to be significant were brand, package form(appearance), cooking time, and sale(purchase) location, which were found in the comparison with the groups that awareness about manufacturers and storage method after purchase corresponded to college students and that distribution route corresponded to ordinary consumers.

• The Journal of Society for e-Business Studies
• /
• v.13 no.1
• /
• pp.21-32
• /
• 2008

RFID systems provide technologies of automatic object identification through wireless communications in invisible ranges and adaptability against various circumstances. These advantages make RFID systems to be applied in various fields of industries and individual life. However, it is difficult to use tags with distinction as tags are increasingly used in life because a tag usually stores only one object identifier in common RFID applications. In addition, RFID systems often make serious violation of privacy caused by various attacks because of their weakness of radio frequency communication. Therefore, information sharing methods among applications are necessary for expansive development of RFID systems. In this paper, we propose efficient RFID scheme. At first, we design a new RFID tag structure which supports many object identifiers of different applications in a tag and allows those applications to access them simultaneously. Secondly, we propose an authentication protocol to support the proposed tag structure. The proposed protocol is designed by considering of robustness against various attacks in low cost RFID systems. Especially, the proposed protocol is focused on efficiency of authentication procedure by considering security levels of applications. In the proposed protocol, each application goes through one of different authentication procedures according to their security levels. Finally, we prove efficiency of th proposed scheme compared with the other schemes through experiments and evaluation.

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.103-115
• /
• 1999

The ultimate goal of periodontal therapy is the regeneration of periodontal tissue which has been lost due to destructive periodontal disease. Various periodontal procedures have been used throughout the years in an attempt to reestablish attachment of periodontal tissues to root surfaces affected by periodontitis. Flap debridement surgery has been demonstrated to be a successful procedure in gaining the probing attachment level and reducing probing depth. A tendency towards impaired wound healing following periodontal procedures in smokers has been clinically documented. But, previous clinical studies on healing response in smokers are based on a retrospective design. The purpose of this study was to evaluate the treatment outcome following flap debridement surgery in smokers compared to nonsmokers. 25 patients with moderate to advanced periodontitis were included for study. Among these patients, 13 patients were smokers, and 12 patients were nonsmokers. Mucoperiosteal flap was raised with the sulcular incision. No antibiotic treatment was administered postsurgery. The patients was recalled at monthly intervals during a period of 6 months following the surgery. The patients were received supragingival scaling and oral hygiene reinforcement. All the recordings, including modified O' Leary plaque control record, bleeding on probing, probing pocket depth, probing attachment level,were recorded, presurgery and 6 months postsurgery. The changes of all the recordings at 6 months after flap debridement surgery revealed the following results: 1. PI on all the dentitions and surgical sites showed no statistical significance between smokers and nonsmokers at presurgery. But, smokers demonstrated a significantly lower % of PI than nonsmokers at 6 months postsurgery. 2. Smokers demonstrated a greater % of BOP sites than nonsmokers on the surgical sites and all the dentitions, presurgery and 6 months postsurgery. But, there was no statistical significance between two groups. 3. Smokers exhibited significantly less reduction of probing depth in the 3 mm or less probing pocket depth(PPD) group, 6mm or more PPD group and total PPD group when compared to nonsmokers at 6 months postsurgery. 4. Smokers exhibited significantly less gain of probing attachment level(PAL) in the 3mm or less PPD group, 6 mm or more PPD group and total PPD group when compared to nonsmokers at 6 months postsurgery.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.4 s.117
• /
• pp.69-83
• /
• 2006

Nature rehabilitation has become a major theme in river management in South Korea. An analysis and evaluation of the landscape is a crucial step to select the suitable tracts for developing or conserving land use in the process of landscape planning. The purpose of this paper is to establish a hierarchical procedure for the setting of the landscape units on the various scales at which field biologists performed their observations and to select the preserves through by a suitability model for synthesizing the ecological empirical, and biophysical data. An evaluation process needs to be performed according to the landscape scales: site, local, and regional scales, at which the environmental data were collected, analyzed, and synthesized. Introducing of three level scales was crucially necessary for evaluating the various multi level ecological data for zoning of preserves in river corridors. The evaluation level at different scales are hierarchically established into three phases. The first evaluation phase can be performed by the long length units defined by the ranges of stream widths at regional scale. Secondly, each of these long units can be divided into two or more segments according to its landscape homogeneity at local level. Finally the segments at the last phase can be designated according to the location of the reservoir weirs and bridges at site level. The conceptual model components are adopted for collecting, evaluating, and interpreting the biological and abiotic data at site level. Three preserves are selected, having high potentials for being intensely managed as the Ecological Education Areas in the river. Despite a lot of assumption the results are expected to facilitate discussion and decision making about which frameworks of evaluation are desirable and adaptable for integrating the ecological data into the rehabilitation design process in South Korea.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.4
• /
• pp.348-355
• /
• 2006

Tennison was the first to recognize and to preserve the Cupid's bow by lowering the peak in the margin of the cleft. Randall had modified the Tennison's repair based on accurate measurements. Bardach's technique evolved from the basic concept of triangular flap cleft lip repair described by Tennison-Randall method. Precise measurements are used to define the dimensions of the equilateral triangular flap, which is created on the cleft side and is inserted into an equilateral triangular defect on the noncleft side. Two symmetrical vertical distances on either side of the cleft are thus formed. It is essential that the incisions in the skin correspond precisely with those on the muscles and mucosa, and that all layers are sutured with the use of the triangular flap, thus preventing vertical scar contracture. This procedure produces a symmetric, balance lip with a well-defined Cupid's bow, a symmetric vermilion, and a properly aligned orbicularis oris muscle. We had treated three patients with unilateral incomplete cleft lip by using Bardach's triangular flap method. The operation scars could be reduced comparing to Millard method because Bardach's method did not use the columella base and the alar base incision. And the flap design was more simple and accurate comparing to Tennison-Randall method. On the other hand, the postoperative scars on the philtrum pointed as a disadvantage of triangular flap method were cosmetically acceptable because the three patients had incomplete cleft lip. We have experienced that Bardach's triangular flap is a recommendable technique for the repair of unilateral incomplete cleft lip.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.91-102
• /
• 2007

Through lessons in recent earthquakes, the bridge engineering community recognizes the need for new seismic design methodologies based on the inelastic structural performance of RC bridge structures. This study represents results of performance-based fragility analysis of reinforced concrete (RC) bridge. Monte carlo simulation is performed to study nonlinear dynamic responses of RC bridge. Two-parameter log-normal distribution function is used to represent the fragility curves. These two-parameters, referred to as fragility parameters, are estimated by the traditional maximum likelihood procedure, which is treated each event of RC bridge pier damage as a realization of Bernoulli experiment. In order to formulate the fragility curves, five different damage states are described by two practical factors: the displacement and curvature ductility, which are mostly influencing on the seismic behavior of RC bridge piers. Five damage states are quantitatively assessed in terms of these seismic ductilities on the basis of numerous experimental results of RC bridge piers. Thereby, the performance-based fragility curves of RC bridge pier are provided in this paper. This approach can be used in constructing the fragility curves of various bridge structures and be applied to construct the seismic hazard map.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.3
• /
• pp.159-168
• /
• 2005

In the previous studies, settlement behaviors of granular compaction piles have generally been analyzed with an evaluation of the settlement reduction factor based on tile load-sharing ratio and the replacement ratio. In this approach, however, since the reinforced ground with granular compaction piles is simplified as the composite ground, only the difference of a relative vertical strength between piles and soils is taken into account without reflecting lateral behaviors of granular compaction piles. In the companion research paper, the method of estimating the settlement of granular compaction piles was proposed by synthetically considering a vertical strength of the ground, lateral behaviors of granular compaction piles, the strength of pile materials, a pile diameter, and an installation distance of the pile. In the presented study, to validate a propriety of the previously proposed method, large scale field load tests and three dimensional numerical analyses are performed. The results are analyzed in detail and compared with the predicted settlements by the proposed method. Finally, a simple method to estimate the settlement of granular compaction piles is suggested for an easy application of the practical design.