• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.709-721
• /
• 2017

This study researches the application methods of Wearable Technology (WT) realizing the convergence of Design and Electronics that could broaden the fashion expression boundaries to correspond to current convergence trends. For this, students in the Department of Fashion design and the Department of Electronics conducted an oriented convergence-design-workshop. The initial step of the workshop, included a lecture on WT including existing cases and brainstorming. As a result, two types of concepts; 'Light' using the lighting technology and 'Complex' using transforming and lighting technologies together were generated. Designers created garments that did not externally expose digital devices and engineers then configured basic systems with the minimum size of the devices applying. At the development stage, designers constructed internal structures of garments which do not influence the comfort situation and activities of those wearing the garments. Engineers then adjusted and finished the fashion prototypes' whole WT systems drawing on designers' guidelines. As the result of this study's workshop, the fashion prototypes were extracted by collaboration according to WT concepts; therefore, there could be the promising potential to broaden fashion expression boundaries through the application of WT.

• Architectural research
• /
• v.1 no.1
• /
• pp.31-40
• /
• 1999

In this age of "Information", many people consider it a deterrent to information flow to provide a hierarchy with private rooms in a modern office layout. There are others, however, who insist that visual and acoustical privacy are more important than any other design factor in achieving higher productivity. The debate may never end, but the partitioned open plan, which is a new form of the vast open plan, has merits of each concept - open and closed layout. Consequently, office design has dramatically shifted to partitioned open planning, with shorter, temporary walls or partitions, originally intended for increasing privacy and diminishing hierarchy, yet still keeping flexibility in spatial organization. The introduction of low-level partitioned spaces in an office layout, however, produces a complicated lighting design problem. Obviously, accurately predicted daylighting performance data are needed not only for daylighting design but for artificial lighting system design. Scale models of 12 sets of unit partitioned spaces are constructed and extensive scale model measurements of both daylight and reflected sunlight have been performed within an artificial sky simulator. The prototype-building interior is modeled with different partition configurations, each of which is modeled using the different envelope geometry and exterior configurations, and then the variations in interior light levels are estimated. The result indicates that partitioned spaces employed in an open plan of modern offices still offer a large potential for daylighting and energy saving as well. Much of the savings may derive from the cumulative effect of reflected sunlight. Optimal design for building envelope geometry and exterior configuration promises additional savings.

• Journal of Digital Convergence
• /
• v.19 no.2
• /
• pp.365-371
• /
• 2021

In this paper, the writer studies the lighting technology and types used in urban night lighting performance. With the continuous change and innovation of life style in today's society, the multiple functions of the city continue to develop. At present, urban night lighting is not limited to lighting the landscape in the daytime by lighting tools. It uses new digital lighting technology to deduce innovative and constantly changes digital nightscape. In this way, through the integration of urban nighttime lighting and modern digital art, the city's brand image can be improved and its economic development will also be affected. In this way, through the integration of urban nighttime lighting and modern digital art, the city's brand image can be improved and its economic development will also be affected. With the development of innovative lighting technology, urban night scene will provide more rich experience in media design.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.145-148
• /
• 2008

In recent years, LED's have been adopted for and ever widening range of applications and numerous examples of the replacement of incandescent and fluorescent light sources due to the dramatic improvements in the efficiency of white LED's can be found. Automotive lighting devices, as with other lighting equipment, should exhibit low power consumption, long lifetime and provide new design opportunities. In this paper, an overview of trends of technology and standardization of LED headlamp were investigated and performed various experiments using LED headlamp.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.18-27
• /
• 2011

LED lighting because of high efficiency, long life, friendly environment, as a general lighting of the next generation, has been substituted for incandescent bulb and fluorescent lamp. The proposed system for use of solar battery is the intelligent controller for LED street lights which is improved the method of battery charging and charging efficiency in winter to extend battery life cycle, controlled lighting current according to SoC and in steps. Also, it is implemented emotional lighting which is controlled with the surrounding environment, by using colorful sub LED to take up 10[%] of a source of total light, white LED. As a lab results, the proposed system was implemented functions to adapt to the environmental changes, and improved the charging efficiency and battery life cycle.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.11-20
• /
• 2011

PSALI is referred to the supplementary lighting for the interior lighting under the daily lighting situation, and pursuant to the pertinent regulations in energy savings design standard and others in recent architecture works, the importance thereof has been increasing gradually coupled with the energy performance index (EPI), energy savings plan and the like as well as expansion of submittal and implementation policies. However, this type of PSALI studies indeed have a number of limitations since it has surrounding environmental conditions in direction, season, region, climate, time, opening rate, window area ratio, actual index, reflection rate of finishing materials and others in the architecture work as well as frequent changes in interior lighting environment for variables in daily light volume flowing into the interior, and others. Therefore, this study has analyzed existing advance research cases to produce the actual-sized model and scaled-down model, and installed the artificial lighting of LED light source possible to reproduce with same capability on both models. As a result of comparison and analysis of the artificial lighting with the key light, it has certain level of error rate from the scaled down lighting device in certain rate and actual model butit was noticeably significant within specific scope.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.317-320
• /
• 2002

In this thesis, we designed specific LonWorks nodes for lighting control then implemented the lighting control system through the operating scenarios. Developed lighting controller plays a role of one network node and according to information from other nodes, decides whether it toms on the light or not. In this way the lights can be controlled by using the location information of light in the lighting control node and the grouping information of the lights in the switch node.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.147-150
• /
• 2005

Fixed lighting of public ways for both vehicles and pedestrians can create a nighttime environment in which people see comfortably and can quickly and accurately identify objects on the roadway being travelled roadway lighting can improve traffic safety, achieve efficient traffic movement and promote the general use of the facility during darkness. The design of a roadway lighting system involves consideration of visibility, economics, esthetics, safety and environmental conditions. This paper describe estimation of horizontal illuminance by actual measurement at main streets in Jejusi. We try to evaluate Jejusi Roadway Lighting Conditions for modeling by computer simulation.

• International Journal of CAD/CAM
• /
• v.12 no.1
• /
• pp.38-47
• /
• 2012

The paper proposes a method for generating a sequence of images with smooth transition of illumination from two input images with different lighting conditions. Our relighting approach is image-based, such as the light field rendering. We store the luminances (pixel RGB values) into "lighting functions" consisting of a couple of parameters related to normal vectors. Images with different light positions are rendered by interpolating the luminances retrieved from the lighting functions. The proposed method is a promising technique for many applications requiring a scene with variety of lighting effects, such as movies, TV games, and so on.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.6
• /
• pp.608-613
• /
• 2004

Artificial lighting accounts for a significant portion of the energy use in office buildings. Therefore, daylighting is considered one of the fundamental design features of energy-efficient buildings. However, complex daylighting simulation tools are not suitable for most designers to help in the decision-making process. This paper provides the results of a simulation analysis to determine the potential energy savings of daylighting effects reducing electrical energy consumption for office building. A whole building simulation tool is used to determine the effects of daylighting on lighting electricity use as well as total electricity use for typical office buildings. It was determined that daylighting does not provide significant additional lighting energy savings when glass transmittance is increased over 0.7 A simplified method is developed based on the analysis results to estimate the annual electrical energy savings attributed to daylighting.