• The Research Journal of the Costume Culture
• /
• v.24 no.3
• /
• pp.287-300
• /
• 2016

The purpose of this study was to review materials that could provide basic data about sports brassieres. In this study, 486 sports brassieres were collected online from 31 brands between November 2015 and February 2016. First, the comparison of compression and encapsulation in sports brassieres identified many different styles. The characteristics of compression brassieres included a cut cup, the front center height of a full cup, round neckline, short front hem, all in one shoulder strap with a patterned racerback design, all in one closure, no wire, and separation cup styles. The characteristics of encapsulation brassieres included a V-shape neckline, mixed round shoulder strap design, back closure, and all in one cup. Second, the comparison of domestic and international sports brassieres sorted the items differently. The characteristics of domestic products included compression brassieres, non-cut cup, the front center height of a full cup, round neckline, short front hem, an all in one shoulder strap with a patterned round design, all in one closure, no wire, and a separation cup. The characteristics of international products included a cut up, racerback shoulder strap design, and an all in one cup. Third, the analysis of domestic and international sports brassieres sizes found that six options were available for domestic compression sports brassieres and nine sizes were available for international products. Domestic encapsulation sports brassieres offered five under bust sizes and five cup sizes. International products offered eight under bust sizes and sixteen cup sizes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.2
• /
• pp.46-52
• /
• 2004

The most of reducers consist of many gear parts, but a ball reducer never contains a gear. As the ball reducer with gearless has no back lash, it is necessary more and more to precision machine. The reducing of ball reducer happens by cycloid curves and all instant relative velocity centers always pass on a given constant position when rotational running. Then, it is difficult to calculate cycloid curve for design and machining. So, this paper studied a software for the design of the ball reducer design and machined all parts included among cycloid curve. By using the developed software, this study has large benefit to design every ball reducer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.1
• /
• pp.117-124
• /
• 2003

Thermal design fur satellite propulsion system has been performed. Overall design requirements and the constitution for propulsion system is described. To meet the thermal design requirements, both a primary and a redundant heater circuit, each with two thermostats placed in series, will protect each hydrazine-wetted components, even if one heater circuit fails to operate. Heater power is turned off if any one of these thermostats is opened at its higher setpoint. Thus, even if one thermostat is failed closed, the second thermostat will turn off the heater. All such components shall be insulated with MLI. Propulsion heater sizing based on the constant worst cold case condition is conducted through thermal analysis. All heaters selected fur propulsion components operate to prevent propellant freezing satisfying the thermal requirements for the propulsion subsystem over the worst case average voltage, i.e. 25 volts.

• Health Policy and Management
• /
• v.1 no.1
• /
• pp.109-115
• /
• 1991

We are in the process of developing information systems that can be helpful for the effective management of community health services provided by the health center and subcenters in Hwachon Gun, Kangwon Do. In doing so, we have employed a different program design from those programs of information systems developed in other health centers or subcenters. The main idea of our design is dividing all the programs into two parts. One part is for the control of operation functions such as addding, seeking, editing, and printing needed to all the tasks. The other consists of a set of programs each of which deals with a specific task. It is believed that this program design would result in an information system that is simple to use, easy to modify and expand, and flexible to new computer technologies.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.457-462
• /
• 1999

The purpose of this study is to design the requirements for the materials of stabilizing slurry and to determine the optimum slruuy mix design used in the underground wall of Inchon LNG #213 and 214 tank. After the materials and mix conditions of stabilizing slurry investigated and tested, we propose materials and optimum mix design according to testing items including funnel viscosity, we propose materials and optimum mix design according to testing items including funnel viscosity, fluid loss, cake thickness and specific gravity. As this results, we select optimum mix design that the upper limit ratio of bentonite is 2.0%, polymer is 0.1% considering the funnel viscosity and dispersion agent is 0.05% considering the fluid loss. Also we select all materials which are composed of GTC4 as bentonite, KSTP as polymer and Bentocryl as dispersion agent. All test results are satisfied our specifications for stabilizing slurry.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.318-322
• /
• 2004

This study was conducted to derive the regional design rainfall by the regional frequency analysis based on the regionalization of the precipitation. For the estimation of the regional design rain(all, classification of the climatologically and geographically homogeneous regions should be preceded preferentially The optimal regionalization of the precipitation data were classified by the above mentioned conditions for all over the regions except Jeju and Ulleung islands in Korea. Relative root mean square error(RRMSE), relative bias(RBIAS) and relative reduction(RR) in RRMSE for the design rainfall were computed and compared between the regional and at-site frequency analysis. Consequently, optimal design rainfalls following the classified regions and consecutive durations were derived by the regional frequency analysis using GEV distribution which was identified to be more optimal one than the other applied distributions.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.23-31
• /
• 2003

As there are so many uncertainties associated with using the determinism analysis method in the design of rubble mound breakwater, it is impossible for a designed construction to provide ultimate stability. First of all, due to the uncertainty of Load and Resistance, a safety level concerning the destruction mode of construction must be given. Then, the optimization design should be processed. After all, we can say that it is a more reasonable design method than the design used by the stability rate. In this study, an established design process is accomplished using Hudson's equation and an economic analysis with the breakwater's section is also conducted. Hudson's equation is compared to Van der Meer's equation. These results are utilized to drop a damage rate, increase the stability of construction, and determine the optimization section of the breakwater.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.109-116
• /
• 2013

Vibrations are generally recognized as the biggest concern in maintaining part' longevity of an All-in-one PC. The vibrations in PCs originate from excitation sources such as the HDD and the cooling fan. In this study, the vibrations from these sources were investigated in order to analyze the individual effects of the parameters on the structural vibrations of the PC; further, we attempted to establish design alterations that could successfully suppress vibrations, in order to achieve improved stability and part' longevity. The results show that relatively simple design alterations can substantially improve the stability of PCs.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.163-166
• /
• 2002

For the development of an all composite unmanned aerial vehicle (UAV), manufacturing consideration in design phase, works for composite parts fabrication, subassembly and final assembly are summarized. In design phase, to maximize the advantage of composite material, manufacturing processes such as cocuring, cobonding and secondary bonding are introduced. For the curing of designed parts, composite tools are designed and manufactured. Assembly jigs are designed to satisfy dimensional tolerance of the structure. Inspection criteria are established and applied to the manufacturing. Technical data about inspection items and methods are summarized as manufacturing specifications for the mass production of the UAV structure.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.96-99
• /
• 2003

As for the Elect-CAD, it was developed a design of the electricity equipment which did manually, a quotation, all kinds of bill writing in the program that Package anger became. Elect-CAD can easily write an estimate back by all kinds of bill writing and estimatic with a design at the same time, and maximization gets an efficiency of work done and can efficiently manage project, and it is a revolutionary program in a management plane.