• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.144-149
• /
• 2005

This study presents the method of extracting shape design data on any aspheric lens by reverse engineering. The design formula fur aspheric lenses is needed in almost all of the design, manufacture and measuring processes. The difficulty in designing the lens lies in the fact that it uses a complex formula for the aspheric surface, and many of the preliminary design values must be selected before actually inserting them into the formula. If the values could be extracted from an aspheric lens for which the structural design information is unknown and used in designing other lenses of similar characteristics, the difficulties in designing and measuring aspheric lens could be reduced. Therefore, in this study, the concept of reverse engineering was applied to demonstrate the method of extracting shape design information of aspheric lens from an arbitrary aspheric lens.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.209-212
• /
• 2009

The Development of Cost Management is embossed efficiently to use the budget for the construction industry. The government is exploring every efforts and polices to control increasing the budget for the construction industry. However, despite of the government's efforts, researches are insufficient for a cost management of development. Also, the changed cost of construction by frequent plan change is caused of decline in quality etc during an accomplishing project. Therefore, in this study, analyzed about principal official phase of design phase to solve the problem. In order to define clearly the target cost concepts in the planning phase apply to the DTC(Design To Cost) concept and technique at the development of cost management process which will be able to manage the enterprise expense. It's process is expected with the fact that will be the possibility efficiently of fixing target cost in the planning phase by the construction client and designer.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.04a
• /
• pp.239-246
• /
• 1999

recently there have been many destructive seismic events in Kobe Japan in 1995 and in Northridge California USA in 1994. etc. The Korean Bridge Design Standard Specifications adopted the seismic design requirements in 1992. Comparing the earthquake magnitude in Korea with those in the west coast of the USA it may be said that the current seismic design requirements of the Korean Bridge Design Standard Specifications provides too conservation design results especially for transverse reinforcement details and amount in reinforced concrete columns. This fact usually makes construction problems in concrete casting due to transverse reinforcement congestion. And the effective stiffness Ieff depends on the axial load P(Ag{{{{ {f }_{ck } }}) and the longitudinal reinforcement ratio Ast/Ag and it is conservative to use the effective stiffness Ieff than the gross section moment Ig. Seismic design for transverse reinforcement content of concrete column is considered of extreme-fiber compression strain R-factor axial load and stiffness etc.

• Korean Journal of Human Ecology
• /
• v.16 no.3
• /
• pp.623-630
• /
• 2007

The remarkable fact regarding the History of Chosun Dynasty(from Jungjong- Youngjo) is that any slightest evidence can't be found that Pobeckchuck was used to measure clothes or various Pobecks. There remains the document that in the 22nd years of Myeonjong, Japan required that Pobeckchuck be used, but it couldn't be allowed because of the reason it was made in the former king. This fact raises the high possibility that Pobeckchuck could be the most trustworthy standardized ruler at that time, and in other point of view, it can be presumed that the measurement in the period of King Sejong continued to have been used until this time. It can be seen that the length of one Chuck of Pobeckchuck at this time must have been equivalent to 46. 73cm of Pobeckchuck of Samchuck in the period of Sejong. In the History of Sunjo Period, many records on Pobeckchuck can be found, which fact seemed to have rectified the measurement system which was disordered by military revolt, though the reason is not clear. Also a record can be found that in the period of Sunjo, Chinese envoy required the Sunjo Regime to use Pobeckchuck for the measurement of copper pillar, which record supports the fact that Pobeckchuck is the standardized ruler. Another record that in the 26th period of Youngjo, Pobeckchuck of Samchuck was corrected according to the Kyeongkukdaejeon shows that the length of Pobeckchuck was 46.80cm at that time. Also, the record which rectified many rulers with the comparison of Hwangjong-chuck, Ju-chuck, Joryeki-chuck, Yongjo-chuck, etc. with one another reveals that the rulers used in the period of Sejong continued to have been used unchanged until in the period of Youngjo.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.115-120
• /
• 1997

System identification is the task of inferring a mathematical description of a dynamic system from a series of measurements of the system. There are several motives for establishing mathematical descriptions of dynamic systems. Typical applications encompass simulation, prediction, fault diagnostics, and control system design. The paper demonstrates that neural networks can be used effective for the identification of nonlinear dynamical systems. The content of this paper concerns dynamic neural network models, where not all inputs to and outputs from the networks are measurable. Only one model type is treated, the well-known Innovation State Space model(Kalman Predictor). The identification is based only on input/output measurements, so in fact a non-linear Extended Kalman Filter problem is solved. Even for linear models this is a non-linear problem without any assurance of convergence, and in spite of this fact an attempt is made to apply the principles from linear models, an extend them to non-linear models. Computer simulation results reveal that the identification scheme suggested are practically feasible.

• KIEAE Journal
• /
• v.5 no.4
• /
• pp.41-50
• /
• 2005

The phenomenon due to the abundance of material civilization, and the destruct of environment provokes the damage to the order of nature in the earth. To prevent the fact, the necessity of the ecology start to become influential an important issue. In an outlook on the world of the ecological concept, human evolves with an environment as the mutual interdependence eventually. The approaching of the ecological method to reform of the present environment is an essentiality. In a viewpoint, the interior landscape starts to distinguish as an ecological concept in interior environment. To recognize the necessity of an interior landscape, comparison and analysis have been carried out in the worldwide examples of the lobby space in high-rise office buildings. In the results, the interior landscape is an essential fact to create an ecological interior environment. As the perceiving of the importance in the composition of the ecological environment, it needs to recognize the imminence the introduction of the ecological concept in the human life.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.6
• /
• pp.449-457
• /
• 2011

The productivity improvement is indispensible to shipbuilding industry for maintaining the world's No. 1. Simulation based production recently has been an issue as prat of efforts to high efficiency production and Korean shipyards requests simulation system tools specialized in a shipbuilding industry. IT convergence project between conventional shipbuilding industry and IT simulation technology has been carried out and integrated simulation framework was proposed as a way to overcome sporadic developments. The framework would provide reusability of kernels and modules and also ensure for expansibilities to other production simulations. The fact that production simulation system should reflect shipyard requirement would be most important. We suggest an analysis process of customer requirements and functional requirements for production simulations. It is partially based on concepts of software engineering and axiomatic design. The process is applied to a design of configuration for simulation framework.

• Korean Institute of Interior Design Journal
• /
• no.17
• /
• pp.157-165
• /
• 1998

This study aimed to identify characteristics of design and decoration of Danish peasant furniture especially painted storage furniture used during the 18-19th century before modern design movement of Internationalism prevailed all over the world. Owing to the fact that Danish peasant furniture were made of available conifer around the farms painting method was preferred to carving. Remoted from main land of western and southern Europe Scandinavian countries longed to imitate their Baroque style architecture and furniture made of marble of hard woods. Painting method was adopted to disguise cheap wood so that it looked like expensive or exotic materials such as marble oak metal granite etc. what they could not afford to buy. Eventually they evolved unique materials equipments and methods for imitation painting in order to decorate folk storage furnitures as well as formal architecture : palaces churches and other official buildings,. Marbling clouds marbling graining stencil spatter painting trompe-I'oeil were common to imitate stones or hard woods. Strong and bright colors had good combination together with dull colors on the Danish peasant painted furniture.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.91-92
• /
• 2006

The aim of this project is to Improve the environment for Sanbon Oriental Medical Center, Wonkwang University. Since 1997 both Occidental Medical and Oriental Medical have occupied this building. Last year most of Occidental Medical except emergency and operating parts moved to the next new building. The serious problem was the fact that the building was designed as function for office not hospital. Especially, I tried to express the images of Won-buddism as well as Oriental Medical and the design targets are : 1. comfortable, creditable atmosphere, 2. traditional, scientific image, 3. ergonomic approach, 4. faith in Oriental Medical, 5. bright, smart space. This is also to create the optimum CEI(Commercial Environmental Identity) by the value pyramid.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2003.05a
• /
• pp.196-199
• /
• 2003

In a modern society, as the architectural materials have become main subject of the interior design expression, their influence on architecture is becoming substantial. There are multiple ways of using architectural materials. The aesthetic value is greatly enhanced by the fact that the architectural materials can be used to create unrestricted and new expression. The modern time is uncertain and rapidly changing. In this era of chaos and diversity, the materialism is being superseded by idealism. Speedy exchange of information among the countries with development of new technology and materials increases the possibility of new expressions. Each new material that adds new value influences on the other art as well as the architecture. These characteristics of new expressions could be viewed as having close relationship with current idealism. Therefore, the study on the expressive trend of architectural materials will provide better understanding and translation on expression of interior design. At this point, this study has a purpose in not only understanding architectural materials but also researching for the characteristics of expression on interior design with consideration of paradigmatic variation in modern times.