• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.174-182
• /
• 2013

This study divided the observation area in an indoor space for area setup to analyse the effect of the difference of design types on the characteristics of observation with the observed time of each area as objects. Though it is thought that the difference of design patterns may be influenced by the factors and material composing the space, no existing approaches have had any quantitatively measuring method. Eye-tracking could be efficiently utilized for observation analysis from the viewpoint of dating observation behavior. The followings are the results of analysing the observation characteristics depending on design pattern. First, 5 observing areas were set up according to concentration of observation time in order for the concentration by area to be examined and the factors of design having effect on the difference of observation patterns by design type could be analysed. Second, as a whole, the observation of modern types showed high observation characteristics. When the difference of observation characteristics by pattern was examined by difference at observation frequency, the observation frequency defined to be more than 50% was seen to be almost same from Area I to III and to get higher from Area IV, and that defined to be 30% was high at Areas III and IV. In Area V, it was very high at natural. Third, that of Area II is no more than 8.2% but had the most observation time. As for observation characteristics, the horizontal observation of the central part was the highest and had more observation frequency at modern type that at natural one. These observation characteristics by area enabled to analyse the observation tendency depending on design characters at relevant area. Fourth, the design factors composing natural type were found to bring more attention when the area showed higher concentration at natural type than at modern one. And the analysis of design factors could make it to be confirmed that the quality of material and background factors in addition to design factors in the area had more effect on sight concentration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1511-1516
• /
• 2007

Because Seaming process of MPJ (Mechanical Press Joining) has various design factors such as thickness, bending radius, seaming width, caulking press width and the dynamic factor such as multistage plastic working, elastic recovery, residual stress, the optimum conditions can't be easily determined. Using a design of experiment based on the FEM, which has several advantages such as less computing, high accuracy performance and usefulness, this study was performed investigating the interaction effect between the various design factor as well as the main effect of the each design factor during drum MPJ and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.950-955
• /
• 2005

For the insulation design of a high temperature superconducting(HTS) cable, three kinds of design method were proposed, which used AC and impulse withstand voltage and partial discharge inception strength. However, the designed insulation thickness by AC and impulse could not be applied to cable fabrication process due to much low electrical breakdown strength. The effect of the multi-layered insulation paper was not considered on the previous insulation design and the insulation thickness by partial discharge inception strength could be applied only. In this paper, the electrical breakdown characteristic, which considered the effect of multi-layered of LPP, was investigated to design the insulation thickness.

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.601-608
• /
• 2007

To meet demand of big capacity and high speed rotation for washing machine, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Because section of flange has various design factors according to configuration of flange, the optimum conditions can’t be easily determined. Using a design of experiment (DOE), this study was performed investigating the interaction effect between factors as well as the main effect of the each design factor under bending and twist and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

• Computers and Concrete
• /
• 제11권6호
• /
• pp.493-513
• /
• 2013

Direct displacement-based design (DDBD) represents an innovative philosophy for seismic design of structures. When structural considerations are more critical, DDBD design should be carried on the basis of limiting material strains since structural damage is always strain related. In this case, the outcome of DDBD is strongly influenced by the displacement demand of the structural element for the target limit strains. Experimental studies have shown that anchorage slip may contribute significantly to the total displacement capacity of R/C column elements. However, in the previous studies, anchorage slip effect is either ignored or lumped into flexural deformations by applying the equivalent strain penetration length. In the light of the above, an attempt is made in this paper to include explicitly anchorage slip effect in DDBD of R/C column elements. For this purpose, a new computer program named RCCOLA-DBD is developed for the DDBD of single R/C elements for limiting material strains. By applying this program, more than 300 parametric designs are conducted to investigate the influence of anchorage slip effect as well as of numerous other parameters on the seismic design of R/C members according to this methodology.

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.607-615
• /
• 2017

This study presents optimum design of plane steel bridges considering corrosion effect by using teaching-learning based optimization (TLBO) method. Optimum solutions of three different bridge problems are linearly carried out including and excluding corrosion effect. The member cross sections are selected from a pre-specified list of 128 W profiles taken from American Institute of Steel Construction (AISC). A computer program is coded in MATLAB to carry out optimum design interacting with SAP2000 using OAPI (Open Application Programming Interface). The stress constraints are incorporated as indicated in AISC Allowable Stress Design (ASD) specifications and also displacement constraints are applied in optimum design. The results obtained from analysis show that the corrosion effect on steel profile surfaces causes a crucial increase on the minimum steel weight of bridges. Moreover, the results show that the method proposed is applicable and robust to reach the destination even for complex problems.

• 응용통계연구
• /
• 제32권4호
• /
• pp.643-652
• /
• 2019

본 연구에서는 반복조사의 표본재설계에서 설계요소를 반영한 표본수 결정 방법을 제안하였다. 제안된 방법은 다단추출과 층화다단추출 등에 적용할 수 있으며 시점간 모집단 구성 변화, 집락효과, 표본할당 등의 주된 설계요소가 갖는 표본오차에 대한 영향력을 구분하여 반영하므로 보다 전략적인 표본수 결정이 가능할 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.214-224
• /
• 1999

The design response spectrum has been widely used in seismic design to estimate force and deformation demands of structures imposed by Earthquake Ground Motion (EQGM). Inelastic Design Response Spectra (IDRS) to specify design yielding strength in seismic codes are obtained by reducing the ordinates of Linear Elastic Design Response Spectrum (LEDRS) by strength reduction factor (R). Since a building is designed using reduced design spectrum (IDRS) rather than LEDRS in current seismic design procedures it allows structures behave inelastically during design level EQGM. Inelastic Response Spectra (IRS) depend not only on the characteristics of the expected ground motion at a given site, but also on the dynamic properties and nonlinear characteristics of a structure. However, it has not been explicitly investigated the effect of different hysteretic models on IRS. In this study, the effect of hysteretic models on IRS is investigated.

• 응용통계연구
• /
• 제28권6호
• /
• pp.1217-1225
• /
• 2015

조사자료분석에 있어서 표본추정량에 대해 설계요소가 갖는 효율성은 단순확률추출과 비교한 복잡표본설계의 의한 표본추출이 주는 분산의 상대적 크기인 설계효과를 통해 평가할 수 있다. 설계효과의 유용성은 복잡설계요소의 함수형태로 표현될 수 있을때 극대화될 수 있다. 본 연구에서는 층화다단추출의 표본설계에서 적용될 수 있는 설계효과모형을 제시하였다. 제시된 설계효과모형은 기존 다단추출을 위한 Gabler 등 (1999, 2006)의 모형을 일반화한 것으로 층구조, 표본할당, 집락추출 및 불균등가중치 등의 설계요소들이 정도수준에 갖는 영향력을 함수식으로 명확히 나타내주고 있다. 이를 활용하면 사전에 기술된 추정정도를 얻기 위해 설정한 표본크기가 줄 수 있는 설계효과를 예측하는데 활용할 수 있다. 또한 사후적으로 표본설계의 개별 설계요소들이 표본추정량에 대해 갖는 효율성을 평가하는데 활용될 수 있다.

• 복식문화연구
• /
• 제10권6호
• /
• pp.697-708
• /
• 2002

The purpose of this study deals with the profitable suit image design of middle-aged men by examining visual effects in physical design. The sample of this study is people who live in Kwangju, Korea and 20∼50age's men and women. And it is very variety in each population statistics factors the differences of physical design visual effect which considering the difference of sex and age, numbers of button, a figure and material pattern. The method of this study is experimentation. Accordingly, I used convenience sampling by considering sex and age distribution with the SPSS program for the data analysis. The difference of body design visual effect brought follow conclusion by demographics variability. The distinction of body design by sex and numbers of button, shoulders have similar differences only in men's group. The length has it both in man and woman's group. The dissimilarity of body design by age and the number of button, the shoulders have similar differences in 30 between 40 aged group and the abdomen has it in 30 aged group. The length has it in 20 between 40 and 50 aged group. In the three factors of body design by sex and shape either sex and pattern, both man and woman have similar differences by the pattern. Totally, number of button and pattern are very important clothes due to give an effect on whole visual effect man's suit. Also, these dues were felt differently by each types of body. Therefore, it is confirmed that the type of body is important that fluent to make people perceive.