• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.159-168
• /
• 2002

In this paper, a study on the design of the transmitter-receiver of fuze sensor for discriminating target position is presented. We propose the algorithm for detecting target distance/direction through investigating the operational concept and principle of fuze sensor. Based on the algorithm, We design transmitter-receiver, calculate various design variables and estimate the performance of that one. The estimated result shows that the required performance of fuze sensor is satisfied. Further research on confirming the performance of proposed algorithm through encounter simulation test with real target and resolving problem will be continued.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.179-180
• /
• 2020

In the budgeting guidelines, there are rules for calculating design fee and direct costs. However, only the design fee is calculated excluding the direct cost, which causes the cost to be insufficient. Therefore, this study is designed to analyze representative cases where direct costs are insufficient, draw out problems, and propose a way to improve design fees.

• Tribology and Lubricants
• /
• 제34권4호
• /
• pp.138-145
• /
• 2018

Elliptical bearings are widely used for large steam turbines owing to their excellent load carrying capacity and good dynamic stability. Power loss in bearings is an extremely important parameter, especially for high turbine capacities. Optimization of operation conditions and design variables such as bearing clearance and bearing length can reduce the power loss in elliptical bearings. Although changes in the oil supply method have served to increase the efficiency of the tilting pad journal bearing, it has not explicitly improved elliptical bearings. In this study, we verify the static characteristics of an elliptical bearing by changing the direction of oil supply. We evaluate the bearing power loss and bearing metal temperature, and compare the bearing performance and reliability in different test cases. The direction of oil supply is $90^{\circ}$ (9 o'clock) and $270^{\circ}$ (3 o'clock) when the rotor rotates in a counterclockwise direction. We use an elliptical bearing with an inner diameter and active length of 220.30 and 110.00 mm, respectively. Bearing power loss and bearing metal temperatures are measured and evaluated by rotor rotational speed, oil flow rate, and bearing load. The results reveal a 20 reduction in the power loss when the direction of oil supply is 90. Furthermore, the oil film on the upper part of the bearing has a high temperature when the direction of oil supply is $90^{\circ}$. In contrast, when the direction of oil supply is $270^{\circ}$, the oil film on the upper part of the bearing is relatively cold.

• 생물환경조절학회지
• /
• 제1권2호
• /
• pp.142-147
• /
• 1992

The wind pressure distributions were analyzed to provide fundamental criteria for the structural design on the two-span arched house according to the wind directions through the wind tunnel experiment. In order to investigate the wind force distributions, the variation of the wind force coefficients, the mean wind force coefficients, the drag force coefficients and the lift force coefficients were estimated using the experimental data. The results obtained are as follows : 1. The variation of the wind force with wind directions on the side walls was the greatest at the upwind edge of the walls. 2. The maximum negative wind force along the length of the roof appeared at the upwind edge at the wind direction of 60$^{\circ}$. 3. The maximum negative wind force along the width of the roof appeared at the width ratio and wind direction of 0$^{\circ}$ and 0.4 in the first house and 0.6 and 30$^{\circ}$ in the second house, respectively. 4. The mean negative wind force on the side walls of the first house at the wind direction of 0$^{\circ}$ was far greater than that of the second house, and the maximum negative wind force on the roof occurred at the wind direction of 30$^{\circ}$. 5. The maximum lift force appeared on the second house at the wind direction of 30$^{\circ}$, but the lift force on the first house was far greater than that on the second house at the wind direction of 0$^{\circ}$. 6. The parts to be considered for the local wind forces were the edges of the walls, and the edges of the x-direction and the width ratio, 0.4 of the y-direction in the roofs.

• Physical Therapy Rehabilitation Science
• /
• 제13권1호
• /
• pp.95-105
• /
• 2024

Objective: The purpose was to investigate changes in mechanical properties, range of motion, and grip strength of the forearm muscle in 13 students depending on the wrapping direction of the floss band. Design: A single-blind, crossover study Methods: Subjects were randomly assigned to the wrapping direction of the flossing band and then performed a concentric exercise of the wrist flexors using a Flex-Bar. Intervention A applied the flossing band in a right spiral direction, Intervention B applied the flossing band in a left spiral direction, and Intervention C performed the exercise alone. All subjects used their dominant right hand, and pre- and post-assessments were conducted between interventions. To analyze differences in changes between groups pre- and post-, all results were subjected to one-way ANOVA, followed by Scheffe's test as a post-hoc analysis. The paired samples t-test was used to analyze the difference between pre- and post-change within groups. Results: First, in the mechanical properties of the Flexor carpi ulnaris (FCU) muscle, interventions A and B significantly improved muscle tone and stiffness than intervention C (p<0.05), and intervention A showed a significant decrease in decrement (muscle elasticity) than intervention B (p<0.05). Second, interventions A and B showed significant improvement in grip strength than intervention C (p<0.05). Conclusions: The right spiral direction of the flossing band tended to increase the elasticity of the muscles compared to the left spiral direction. Therefore, in future studies, it is necessary to choose the direction of the flossing band to increase the elasticity of the muscles.

• 복식문화연구
• /
• 제21권3호
• /
• pp.440-451
• /
• 2013

Because of the e-shopping market consumers now have diverse options to choose when placing their orders, and find it easy to obtain the required information through the Internet. Especially, for consumers, product reviews posted on an e-tailer's website have become more important criteria than such information available elsewhere. Hence, this study investigated the influence of the direction and evaluative contents of online reviews on consumer attitudes toward clothing products. Four types of online reviews based on direction (positive/negative) and evaluative content in review information (objective/subjective) were used in the experimental design. Further, stimulus reviews were developed. Credibility, usefulness of reviews, product preference, and purchase intention were the measured dependent variables in each of the four situations of online review presentations. The results indicated that, overall, positive and objective online reviews resulted in a higher level of consumer attitude. The content in these reviews had a relatively stronger influence than the direction on attitudes toward online reviews. Overall, objective reviews generated a higher level of credibility and usefulness of information than subjective reviews. Regarding subjective reviews, negative information was more related to credibility, whereas positive information was more related to usefulness. Further, positive information had a higher influence than negative information on consumer attitudes.

• 한국가구학회지
• /
• 제16권1호
• /
• pp.17-23
• /
• 2005

European maple is famous for the optimum solid wood for making bridge which is the most important part in violin acoustics. This study was carried out to investigate the variation of main features, i. e. annual ring width and cutting direction of costly imported violin bridge blanks and to examine the effect of these features of the blanks on the vibrational characteristics of bridge blanks. Imported violin bridge blanks had somewhat large variation in major macroscopical and physical properties and there was little relationship between annual ring density and weight of maple blanks. Resonant frequency of violin bridge blanks had some positive correlation with weight, however, damping having negative relationship with frequency was seldom affected by any physical properties of the maple blanks. Deviation from the radial cutting of tail side(ray direction from top toward feet on the edge of bridge blank) lowered the resonant frequency. Consequently, weight and ray direction should be taken for the critical quality decisive factors(QDF) of incoming bridge blanks by not only inspectors also luthiers who tune the bridge by shaping and are responsible for the final timbre quality of this complicate instrument.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.8-13
• /
• 2017

The rolled carbon steel plate has anisotropic property in Z-direction(thickness direction). This is induced by cooling rate difference of Z-direction and sulfur which make non-metallic inclusion(MnS) at center line of thickness direction. Z-directional mechanical properties of normal steel plate are not generally specified and it is defined for Z-Quality steel only through tensile test in Z-direction. If Z-quality steel is not applied for cruciform joint, the lamella tearing will be occurred by tensile stress after welding & during operation of the structure. In this research, one equation estimating Z-directional(orthogonal to plate) stress was developed to prevent lamella tearing by welding. This equation deals with plate thickness & joint configuration(eccentricity, angle and curvature). Analyses were done by strain boundary method using sectional FE modeling and FE 3D models are also used for some cases. Designers can predict the possibility of lamella tearing by adequately applying the result and can appropriately minimize the application of Z-quality steel by revising welding design to some extent.

• 전자공학회논문지
• /
• 제54권3호
• /
• pp.119-128
• /
• 2017

본 논문에서는 주파수 도약 신호나 burst 신호와 같이 신호의 유지시간이 짧은 신호에 대한 방향탐지를 위한 광대역 방향탐지 알고리즘과 시스템 설계 방안에 대해 제안한다. 제안된 구조는 near perfect reconstruction이 가능한 폴리페이즈 필터뱅크(polyphse filterbank)를 전처리 과정으로 사용하며 각 서브밴드에서 신호 존재 여부를 판단하고 각 서브밴드에서 일반적인 방향탐지 알고리즘이 수행하는 구조이다. 아울러 Matlab 시뮬링크와 제작된 광대역수신기에서 수집한 데이터를 사용하여 다양한 환경에서 제안된 알고리즘에 대해 그 성능을 검증하였다.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.75-83
• /
• 2007

Why do some countries walk on the right and others on the left? People have a dominant hand which leads to a natural tendency to favor one side of the road or another depending on the means of transportation being used. The primary objective of this study was to investigate the stereotype of Korean regarding preferred walking direction in encountering various facilities and provide the appropriate information to traffic policy makers. Six hundred Korean male and female subjects aging from 12 to 83 were selected to investigate the various statistics about their preferred walking direction and their employment characteristics on walking diverse facilities. The walking directions of eleven different facilities were asked along with other relative subjects' characteristics(e.g., age, gender, hand and foot dominance) to determine the relationship among these obtained data. The descriptive statistics showed that 73.7% and 26.3% were preferred walking right and left direction respectively. Moreover, various statistical analysis revealed that general tendency of walking direction was varied by hand and foot dominances. There were strong tendency that right-handed people prefer walking right side of the road and vise versa, hence this should be considered in setting up traffic policies. As a concluding remark, it is better to design traffic policies and regulations in the way that peoples' preference and expectation.